Define IEEE 754-2008 feature control bits: FIR.HAS2008, FCSR.ABS2008 and
FCSR.NAN2008, and update the `_ieee754_csr' structure accordingly.

For completeness define FIR.UFRP too.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9709/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Implement the FCCR, FEXR and FENR "shadow" FPU registers for the
architecture levels that include them, for the CFC1 and CTC1
instructions in the full emulation mode.

For completeness add macros for the CP1 UFR and UNFR registers too, no
actual implementation though.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9708/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Implement FIR feature flags in the FPU emulator according to features
supported and architecture level requirements.  The W, L and F64 bits
have only been added at level #2 even though the features they refer to
were also included with the MIPS64r1 ISA and the W fixed-point format
also with the MIPS32r1 ISA.

This is only relevant for the full emulation mode and the emulated CFC1
instruction as well as ptrace(2) accesses.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9707/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Restore EPC at the branch whose delay slot is emulated if the delay-slot
instruction signals.  This is so that code in `fpu_emulator_cop1Handler'
does not see EPC having advanced and mistakenly successfully resume
userland execution from the location at the branch target in that case.
Restoring EPC guarantees an immediate exit from the emulation loop and
if EPC hasn't advanced at all since entering the loop, also issuing the
signal reported by the delay-slot instruction.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9701/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Correct ISA requirements for floating-point instructions:

* the CU3 exception signifies a real COP3 instruction in MIPS I & II,

* the BC1FL and BC1TL instructions are not supported in MIPS I,

* the SQRT.fmt instructions are indeed supported in MIPS II,

* the LDC1 and SDC1 instructions are indeed supported in MIPS32r1,

* the CEIL.W.fmt, FLOOR.W.fmt, ROUND.W.fmt and TRUNC.W.fmt instructions
  are indeed supported in MIPS32,

* the CVT.L.fmt and CVT.fmt.L instructions are indeed supported in
  MIPS32r2 and MIPS32r6,

* the CEIL.L.fmt, FLOOR.L.fmt, ROUND.L.fmt and TRUNC.L.fmt instructions
  are indeed supported in MIPS32r2 and MIPS32r6,

* the RSQRT.fmt and RECIP.fmt instructions are indeed supported in
  MIPS64r1,

Also simplify conditionals for MIPS III and MIPS IV FPU instructions and
the handling of the MOVCI minor opcode.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9700/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move CFC1/CTC1 emulation code to separate functions to avoid excessive
indentation in forthcoming changes.  Adjust formatting in a minor way
and remove extraneous round brackets.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9682/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 56a64733 [MIPS: math-emu: Switch to using the MIPS rounding
modes.] removed the distinction between hardware and emulator rounding
mode encodings, the hardware encoding is now used in emulation as well.
Complement the change and remove the `modeindex' macro previously used
for indexing into encoding translation tables, it now does nothing and
only obfuscates code by reinserting the value extracted from FCSR.
Adjust comments accordingly.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9680/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Correct the double-tab indentation of the branch-likely not-taken case.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9674/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

MIPS R2 FPU instructions are also present in MIPS R6 so amend the
preprocessor definitions to take MIPS R6 into consideration.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 removed quite a few R2 instructions. However, there
is plenty of <R6 userland code so we add an in-kernel emulator
so we can still be able to execute all R2 userland out there.

The emulator comes with a handy debugfs under /mips/ directory
(r2-emul-stats) to provide some basic statistics of the
instructions that are being emulated.

Below are some statistics from booting a minimal buildroot image:

Instruction     Total   BDslot
------------------------------
movs            236969  0
hilo            56686   0
muls            55279   0
divs            10941   0
dsps            0       0
bops            1       0
traps           0       0
fpus            0       0
loads           214981  17
stores          103364  0
llsc            56898   0
dsemul          150418  0
jr              370158
bltzl           43
bgezl           1594
bltzll          0
bgezll          0
bltzal          39
bgezal          39
beql            14503
bnel            138741
blezl           0
bgtzl           3988
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 ldc2 opcode for the new BEQZC and JIC instructions
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 DADDI opcode for the new BNVC, BNEC and
BNEZLAC instructions.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and
BEQZALC instructions.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 added the following four instructions which share the
BGTZ and BGTZL opcode:

BLTZALC: Compact branch-and-link if GPR rt is < to zero
BGTZALC: Compact branch-and-link if GPR rt is > to zero
BLTZL  : Compact branch if GPR rt is < to zero
BGTZL  : Compact branch if GPR rt is > to zero
BLTC   : Compact branch if GPR rs is less than GPR rt
BLTUC  : Similar to BLTC but unsigned
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 added the following four instructions which share the
BLEZ and BLEZL opcodes:

BLEZALC: Compact branch-and-link if GPR rt is <= to zero
BGEZALC: Compact branch-and-link if GPR rt is >= to zero
BLEZC  : Compact branch if GPR rt is <= to zero
BGEZC  : Compact branch if GPR rt is >= to zero
BGEC   : Compact branch if GPR rs is less than or equal to GPR rt
BGEUC  : Similar to BGEC but unsigned.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 introduced the following two branch instructions for COP1:

BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero
BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL,
BGTZL branch likely instructions so we must not try to emulate them on
MIPS R6 if the R2-to-R6 emulator is not present.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

The MIPS R6 JR instruction is an alias to the JALR one, so it may
need emulation for non-R6 userlands.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>

Hybrid FPRs is a scheme where scalar FP registers are 64b wide, but
accesses to odd indexed single registers use bits 63:32 of the
preceeding even indexed 64b register. In this mode all FP code
except that built for the plain FP64 ABI can execute correctly. Most
notably a combination of FP64A & FP32 code can execute correctly,
allowing for existing FP32 binaries to be linked with new FP64A binaries
that can make use of 64 bit FP & MSA.

Hybrid FPRs are implemented by setting both the FR & FRE bits, trapping
& emulating single precision FP instructions (via Reserved Instruction
exceptions) whilst allowing others to execute natively. It therefore has
a penalty in terms of execution speed, and should only be used when no
fully native mode can be. As more binaries are recompiled to use either
the FPXX or FP64(A) ABIs, the need for hybrid FPRs should diminish.
However in the short to mid term it allows for a gradual transition
towards that world, rather than a complete ABI break which is not
feasible for some users & not desirable for many.

A task will be executed using the hybrid FPR scheme when its
TIF_HYBRID_FPREGS flag is set & TIF_32BIT_FPREGS is clear. A further
patch will set the flags as necessary, this patch simply adds the
infrastructure necessary for the hybrid FPR mode to work.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7683/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Starting with version 2.24.51.20140728 MIPS binutils complain loudly
about mixing soft-float and hard-float object files, leading to this
build failure since GCC is invoked with "-msoft-float" on MIPS:

{standard input}: Warning: .gnu_attribute 4,3 requires `softfloat'
  LD      arch/mips/alchemy/common/built-in.o
mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o
 uses -msoft-float (set by arch/mips/alchemy/common/prom.o),
 arch/mips/alchemy/common/sleeper.o uses -mhard-float

To fix this, we detect if GAS is new enough to support "-msoft-float" command
option, and if it does, we can let GCC pass it to GAS;  but then we also need
to sprinkle the files which make use of floating point registers with the
necessary ".set hardfloat" directives.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8355/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 08a07904 ("MIPS: math-emu: Remove most ifdefery") removed
the #ifdef ISA conditions and switched to runtime detection. However,
according to the instruction set manual, the cop1x_op instructions are
available in >=MIPS32r2 as well. This fixes a problem on MIPS32r2
with the ntpd package which failed to execute with a SIGILL exit code due
to the fact that a madd.d instruction was not being emulated.
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Fixes: 08a07904 ("MIPS: math-emu: Remove most ifdefery")
Cc: <stable@vger.kernel.org> # v3.16+
Cc: linux-mips@linux-mips.org
Reviewed-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/8173/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit bbd426f5 "MIPS: Simplify FP context access" modified the
SIFROMREG & SIFROMHREG macros such that they return unsigned rather
than signed 32b integers. I had believed that to be fine, but
inadvertently missed the MFC1 & MFHC1 cases which write to a struct
pt_regs regs element. On MIPS32 this is fine, but on 64 bit those
saved regs' fields are 64 bit wide. Using unsigned values caused the
32 bit value from the FP register to be zero rather than sign extended
as the architecture specifies, causing incorrect emulation of the
MFC1 & MFHc1 instructions. Fix by reintroducing the casts to signed
integers, and therefore the sign extension.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7848/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some versions of the assembler will not assemble CFC1 for OCTEON, so
override the ISA for these.

Add r4k_fpu.o to handle low level FPU initialization.

Modify octeon_switch.S to save the FPU registers.  And include
r4k_switch.S to pick up more FPU support.

Get rid of "#define cpu_has_fpu		0"
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: kvm@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7006/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Sometimes it's useful to let the user, while doing performance research,
know what in the IEEE754 exceptions has caused many times of FP emulation
when running a specific application. This patch adds 5 more files to
/sys/kernel/debug/mips/fpuemustats/, whose filenames begin with "ieee754".
These stats are in addition to the existing cp1ops, cp1xops, errors, loads
and stores, which may not be useful in understanding the reasons of ieee754
exceptions.

[ralf@linux-mips.org: Fixed reject due to other changes to the kernel
FP assist software.]
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Steven.Hill@imgtec.com
Cc: james.hogan@imgtec.com
Patchwork: http://patchwork.linux-mips.org/patch/7044/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Move microMIPS32_to_MIPS32() to a separate file which only gets built
for mipsMIPS configurations; for other configurations the optimizer
eleminates calls to microMIPS32_to_MIPS32().
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Previously math-emu was using the IEEE-754 constants internally.  These
were differing by having the constants for rounding to +/- infinity
switched, so a conversion was necessary.  This would be entirely
avoidable if the MIPS constants were used throughout, so get rid of
the bloat.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

mm_isBranchInstr() did reside in the math emu code even though it logically
is separate and also is used outside the math emu code.  In addition GCC 4.9.0
leaves the following unnnecessarily bloated function body for a non-microMIPS
configuration:

<mm_isBranchInstr>:
    105c:       afa50004        sw      a1,4(sp)
    1060:       afa60008        sw      a2,8(sp)
    1064:       afa7000c        sw      a3,12(sp)
    1068:       03e00008        jr      ra
    106c:       00001021        move    v0,zero

which stores arguments that are never going to be used on the stack frame.

Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr()
into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function
which only invokes __mm_isBranchInstr() on microMIPS configurations.

This shaves off 112 bytes off the kernel and improves code flow a bit.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 o Only define variables in the outermost block
 o One empty line at most
 o Format comments as per CodingStyle
 o Update FSF address in licensing term comment
 o Spell FPU and MIPS in all capitals.
 o Remove ####-type of lines in comments.
 o Try to make things a bit most consistent between sp_*.c / dp_*.c files.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

And another bunch of #ifdefs bite the dust.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Most of these tests should be runtime tests.  This also finally means
that on a MIPS III systems MIPS IV opcodes are going to result in an
exception as they're supposed to.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The upper bits of an FP register are architecturally defined as
unpredictable following an instructions which only writes the lower
bits. The prior behaviour of the kernel is to leave them unmodified.
This patch modifies that to clear the upper bits to zero. This is what
the MSA architecture reference manual specifies should happen for its
wider registers and is still permissible for scalar FP instructions
given the bits unpredictability there.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: sergei.shtylyov@cogentembedded.com
Patchwork: https://patchwork.linux-mips.org/patch/6435/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>