- 05 5月, 2010 3 次提交
-
-
由 Anisse Astier 提交于
Add a quirk for all-in-one computer Dell Inspiron One 19 Touch to have proper HP and Mic support. Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/549267 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: Richard Gagne Tested-by: Richard Gagne Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/573284 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: NAndy Couldrake <acouldrake@googlemail.com> Tested-by: NAndy Couldrake <acouldrake@googlemail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2010 1 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/420578 The OR has verified that his hardware distorts because of the 0 dB offset not corresponding to the highest PCM level. Fix this by capping said PCM level to 0 dB similarly to what we do for CX20549 (Venice). Reported-by: NMike Pontillo <pontillo@gmail.com> Tested-by: NMike Pontillo <pontillo@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2010 1 次提交
-
-
由 Greg Alexander 提交于
Add patch for the Conexant 5066 HDA codec to support the Lenovo IdeaPad U150 Signed-off-by: NGreg Alexander <greigs@galexander.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 1月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
The amp used for the mic input on HP Compaq F700 with Cxt5051 codec has no multiple inputs, thus its index should be 0 instead of 1. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 1月, 2010 7 次提交
-
-
由 Takashi Iwai 提交于
The HP pin (0x16) control has to be changed dynamically depending on the master volume switch as well as the speaker pin (0x1a). Otherwise the headphone still sounds with master off. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the wrongly set up for SPDIF output on Conexant 5051 codec. It must point to the audio out widget instead of a pin. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Initialize the mic ports B & C on Conexant 5051 codec dynamically according to the mic jack detection, instead of static init arrays. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
All cx5051 codec models have the same Master playback mixer definitions. Merge them together. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support for Toshiba Satellite M300 with Conexant 5051 codec. Since the laptop has no port C connection and the pin reports always the jack sense true, we need to ignore port-C unsol event. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use the standard "Capture" mixer name for HP dv6736 with Cxt5051 codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Minor fixes for HP Compaq Presario F700 quirks with Cxt5051 codec: - changed the capture mixer elements to the standard name. - fixed the quirk name string without a space - sorted the quirk list - updated the documentation Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 1月, 2010 3 次提交
-
-
由 Daniel Drake 提交于
The XO's audio hardware is wired up to allow DC sensors (e.g. light sensors, thermistors, etc) to be plugged in through the microphone jack. Add sound mixer controls to allow this mode to be enabled and tweaked. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Daniel Drake 提交于
The XO-1.5 has a microphone LED designed to indicate to the user when something is being recorded. This light is controlled by the microphone bias voltage and it is currently coming on all the time. This patch defers the microphone port configuration until when recording is actually taking place, fixing the behaviour of the LED. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Ken Prox 提交于
Added patch for Hewlett-Packard Company Device Subsystem id - 103c:30ea. Signed-off-by: NKen Prox <kprox@users.sourceforge.net> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 17 12月, 2009 2 次提交
-
-
由 Einar Rünkaru 提交于
Conexant CX20583-10Z has digital beep device with volume control. Making use of them. Signed-off-by: NEinar Rünkaru <einarry@smail.ee> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Einar Rünkaru 提交于
Fixed initialization of internal mic and added internal mic boost control Renamed analog mic boost control to ext mic boost contol. Name pair analog/digital seems too confusing for a normal user. Signed-off-by: NEinar Rünkaru <einarry@smail.ee> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 12月, 2009 2 次提交
-
-
由 Jaroslav Kysela 提交于
The HDA_SUBDEV_NID_FLAG is duplicate for amplifier control elements. Move get_amp_nid_() call to the snd_hda_ctl_add() function. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
The purpose of this changeset is to show information about amplifier setting in the codec proc file. Something like: Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Front Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 01 12月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The NID 0x1a of Conexant 5047 chip is a mic boost volume only with the output amp unlike 5045 chip. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 11月, 2009 1 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4792 Cristian reported that these models have really bad sound above 6 dB and proposed the original patch. I've updated the comment to reflect this change. Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Reported-by: Cristian Klein Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 11月, 2009 1 次提交
-
-
由 Einar Rünkaru 提交于
Dell Vostro 1015n uses Conexant CX20583-10Z (0x14f1:5067). Patch is based on "olpc-xo-1_5" branch. Dell uses digital mic. Signed-off-by: NEinar Rünkaru <einarry@smail.ee> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 11月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 11月, 2009 1 次提交
-
-
由 Daniel Drake 提交于
Our contacts at Conexant suggested that we reduce the external microphone bias to 50% in order to center the input signal with the DC input range of the codec. This is because the microphone port is DC coupled for potential use with sensors. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 11月, 2009 1 次提交
-
-
由 Daniel Drake 提交于
The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can be used to automatically select the correct CXT5066 configuration. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 9月, 2009 1 次提交
-
-
由 Lukasz Marcinowski 提交于
After puting a cd-audio inside my laptop there was no sound out here, so I decided to install alsa-driver with debug level and setup a model=test, it didn't help, but then I look at source code and added this few lines, now cd-audio is working both when playback/recording. [Additional minor fixes of mixer element/item names by tiwai] Signed-off-by: NLukasz Marcinowski <nowymarluk@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 7月, 2009 1 次提交
-
-
由 Daniel Drake 提交于
This adds support for the Conexant CX20582 codec, based on code from http://www.linuxant.com/alsa-driver/alsa-driver-linuxant-1.0.19ppch12-1.noarch.rpm.zip This is the codec to be shipped in the OLPC XO-1.5, so this patch also includes an XO-specific profile. Resultant configuration: http://dev.laptop.org/~dsd/20090713/codec0.txt http://dev.laptop.org/~dsd/20090713/codec0.svg As the Linuxant code is structured differently to the other codecs, I was unable to cleanly reimplement everything in the generic and Dell profiles as more info is needed (e.g. codec graphs). I simplified those profiles so that hopefully it will not break anyone's audio. If it does, it may be worth returning -ENODEV from patch_cx5066 on non-OLPC systems, and then fixing snd_hda_codec_configure() to fall back on the generic parser, at least until support for other systems is figured out. Signed-off-by: NDaniel Drake <dsd@laptop.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 6月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Make the jack-plug notification via input layer selectable via Kconfig. This is often unnecessary, and the similr function will be provided using the ALSA control API in near future anyway. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 5月, 2009 1 次提交
-
-
由 Tony Vroon 提交于
A docking mic control is shown by default. The Compaq Presario CQ60 laptop has no docking connector, so designate it as a CXT5051_HP model. This makes the phantom mixer slider disappear. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 4月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Don't call snd_jack_report at release of sigmatel and conexnat codecs which results in Oops at unloading the module. The Oops is triggered by the power-up sequence during the free due to the pincfg restoration. Since the power-up sequence is involved with the unsol handling, the jack reporting may be issued during that. The Oops occurs with this jack reporting because the jack instances have been already released but the codec doesn't do the proper book-keeping. This patch adds the book-keeping of jack instances to avoid the access to bogus pointers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add a flag to work around the non-standard amp-value handling on Conexant codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 3月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Gregorio Guidi 提交于
Update the places where the 0x1d widget is used for Conexant 5047, fixing mismatch introduced after changing the connection. Signed-off-by: NGregorio Guidi <gregorio.guidi@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 3月, 2009 5 次提交
-
-
由 Takashi Iwai 提交于
Clean up Conexant 5047 pareser code: - Split mixer elements to separate arrays to reduce the duplicated entires - Fix mixer element names to the standard ones - Remove unneeded cxt5047_hp2_unsol_event; the normal unsol_event handler works fine. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix the initial connections of output pins 0x13 and 0x1d for Conexant 5047 codec to point to the mixer amp properly. Removed unneeded (doubly) verbs from arrays, also removed the unneeded changing of widget 0x1c, which is now completely unused. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove superfluous verbs from cxt5047_toshiba_init_verbs[]. Also fix comments and minor coding style issues. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Create "Capture Source" control dynamically for Conexant codecs. If only one capture item is available, don't create such a control since it's just useless. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of binding volumes, create a virtual master volume for Conexant codecs. This allows separate HP and speaker volume controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Fix the mic input of HP dv6736 with Conexant 5051 codec chip. This laptop seems have no mic-switching per jack connection. A new model hp-dv6736 is introduced to match with the h/w implementation. Reference: Novell bnc#480753 https://bugzilla.novell.com/show_bug.cgi?id=480753Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-