This enables support for synchronous DAX fault on powerpc

The generic changes are added as part of b6fb293f ("mm: Define
MAP_SYNC and VM_SYNC flags")

Without this, mmap returns EOPNOTSUPP for MAP_SYNC with
MAP_SHARED_VALIDATE

Instead of adding MAP_SYNC with same value to
arch/powerpc/include/uapi/asm/mman.h, I am moving the #define to
asm-generic/mman-common.h.  Two architectures using mman-common.h
directly are sparc and powerpc.  We should be able to consloidate more
#defines to mman-common.h.  That can be done as a separate patch.

Link: http://lkml.kernel.org/r/20190528091120.13322-1-aneesh.kumar@linux.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is now allowed to use persistent memory like a regular RAM, but
currently there is no way to remove this memory until machine is
rebooted.

This work expands the functionality to also allows hotremoving
previously hotplugged persistent memory, and recover the device for use
for other purposes.

To hotremove persistent memory, the management software must first
offline all memory blocks of dax region, and than unbind it from
device-dax/kmem driver.  So, operations should look like this:

  echo offline > /sys/devices/system/memory/memoryN/state
  ...
  echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind

Note: if unbind is done without offlining memory beforehand, it won't be
possible to do dax0.0 hotremove, and dax's memory is going to be part of
System RAM until reboot.

Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.comSigned-off-by: NPavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Presently the remove_memory() interface is inherently broken.  It tries
to remove memory but panics if some memory is not offline.  The problem
is that it is impossible to ensure that all memory blocks are offline as
this function also takes lock_device_hotplug that is required to change
memory state via sysfs.

So, between calling this function and offlining all memory blocks there
is always a window when lock_device_hotplug is released, and therefore,
there is always a chance for a panic during this window.

Make this interface to return an error if memory removal fails.  This
way it is safe to call this function without panicking machine, and also
makes it symmetric to add_memory() which already returns an error.

Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.comSigned-off-by: NPavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series ""Hotremove" persistent memory", v6.

Recently, adding a persistent memory to be used like a regular RAM was
added to Linux.  This work extends this functionality to also allow hot
removing persistent memory.

We (Microsoft) have an important use case for this functionality.

The requirement is for physical machines with small amount of RAM (~8G)
to be able to reboot in a very short period of time (<1s).  Yet, there
is a userland state that is expensive to recreate (~2G).

The solution is to boot machines with 2G preserved for persistent
memory.

Copy the state, and hotadd the persistent memory so machine still has
all 8G available for runtime.  Before reboot, offline and hotremove
device-dax 2G, copy the memory that is needed to be preserved to pmem0
device, and reboot.

The series of operations look like this:

1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
   and free ramdisk.
2. Convert raw pmem0 to devdax
   ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
3. Hotadd to System RAM
   echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
   echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
   echo online_movable > /sys/devices/system/memoryXXX/state
4. Before reboot hotremove device-dax memory from System RAM
   echo offline > /sys/devices/system/memoryXXX/state
   echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
5. Create raw pmem0 device
   ndctl create-namespace --mode raw  -e namespace0.0 -f
6. Copy the state that was stored by apps to ramdisk to pmem device
7. Do kexec reboot or reboot through firmware if firmware does not
   zero memory in pmem0 region (These machines have only regular
   volatile memory). So to have pmem0 device either memmap kernel
   parameter is used, or devices nodes in dtb are specified.

This patch (of 3):

When add_memory() fails, the resource and the memory should be freed.

Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
Fixes: c221c0b0 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: NPavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a few spelling and grammar errors, and two places where fast/safe in
the documentation did not match the function.

Link: http://lkml.kernel.org/r/20190321014452.13297-1-tomlevy93@gmail.comSigned-off-by: NTom Levy <tomlevy93@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andreas Christoforou reported:

  UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
  9 * 2305843009213693951 cannot be represented in type 'long int'
  ...
  Call Trace:
    mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
    evict+0x472/0x8c0 fs/inode.c:558
    iput_final fs/inode.c:1547 [inline]
    iput+0x51d/0x8c0 fs/inode.c:1573
    mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
    mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
    vfs_mkobj+0x39e/0x580 fs/namei.c:2892
    prepare_open ipc/mqueue.c:731 [inline]
    do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771

Which could be triggered by:

        struct mq_attr attr = {
                .mq_flags = 0,
                .mq_maxmsg = 9,
                .mq_msgsize = 0x1fffffffffffffff,
                .mq_curmsgs = 0,
        };

        if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
                perror("mq_open");

mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL.  During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane).  Instead,
delay this check to after seeing a valid "user".

The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.

Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescookSigned-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NAndreas Christoforou <andreaschristofo@gmail.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For architectures using __WARN_TAINT, the WARN_ON macro did not print
out the "cut here" string.  The other WARN_XXX macros would print "cut
here" inside __warn_printk, which is not called for WARN_ON since it
doesn't have a message to print.

Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
Fixes: a7bed27a ("bug: fix "cut here" location for __WARN_TAINT architectures")
Signed-off-by: NDrew Davenport <ddavenport@chromium.org>
Acked-by: NKees Cook <keescook@chromium.org>
Tested-by: NKees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add helper commands and functions for finding pointers to struct device
by enumerating linux device bus/class infrastructure.  This can be used
to fetch subsystem and driver-specific structs:

  (gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
  (gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
  (gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data

Several generic "lx-device-list" functions are included to enumerate
devices by bus and class:

  (gdb) lx-device-list-bus usb
  (gdb) lx-device-list-class
  (gdb) lx-device-list-tree &platform_bus

Similar information is available in /sys but pointer values are
deliberately hidden.

Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.comSigned-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
accessible through a debugger.

This can be useful if the target crashes or hangs because power domains
were not properly enabled.

Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.comSigned-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags.  The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.

Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.

Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.comSigned-off-by: NMiroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NRodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct pid's count is an atomic_t field used as a refcount.  Use
refcount_t for it which is basically atomic_t but does additional
checking to prevent use-after-free bugs.

For memory ordering, the only change is with the following:

 -	if ((atomic_read(&pid->count) == 1) ||
 -	     atomic_dec_and_test(&pid->count)) {
 +	if (refcount_dec_and_test(&pid->count)) {
 		kmem_cache_free(ns->pid_cachep, pid);

Here the change is from: Fully ordered --> RELEASE + ACQUIRE (as per
refcount-vs-atomic.rst) This ACQUIRE should take care of making sure the
free happens after the refcount_dec_and_test().

The above hunk also removes atomic_read() since it is not needed for the
code to work and it is unclear how beneficial it is.  The removal lets
refcount_dec_and_test() check for cases where get_pid() happened before
the object was freed.

Link: http://lkml.kernel.org/r/20190701183826.191936-1-joel@joelfernandes.orgSigned-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: NAndrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: KJ Tsanaktsidis <ktsanaktsidis@zendesk.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dev_info.name[] array has space for RIO_MAX_DEVNAME_SZ + 1
characters.  But the problem here is that we don't ensure that the user
put a NUL terminator on the end of the string.  It could lead to an out
of bounds read.

Link: http://lkml.kernel.org/r/20190529110601.GB19119@mwanda
Fixes: e8de3701 ("rapidio: add mport char device driver")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAlexandre Bounine <alex.bou9@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that restore_saved_sigmask_unless() is always called with the same
argument right before poll_select_copy_remaining() we can move it into
poll_select_copy_remaining() and make it the only caller of restore() in
fs/select.c.

The patch also renames poll_select_copy_remaining(),
poll_select_finish() looks better after this change.

kern_select() doesn't use set_user_sigmask(), so in this case
poll_select_finish() does restore_saved_sigmask_unless() "for no
reason".  But this won't hurt, and WARN_ON(!TIF_SIGPENDING) is still
valid.

Link: http://lkml.kernel.org/r/20190606140915.GC13440@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@aculab.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_poll() returns -EINTR if interrupted and after that all its callers
have to translate it into -ERESTARTNOHAND.  Change do_poll() to return
-ERESTARTNOHAND and update (simplify) the callers.

Note that this also unifies all users of restore_saved_sigmask_unless(),
see the next patch.

Linus:

: The *right* return value will actually be then chosen by
: poll_select_copy_remaining(), which will turn ERESTARTNOHAND to EINTR
: when it can't update the timeout.
:
: Except for the cases that use restart_block and do that instead and
: don't have the whole timeout restart issue as a result.

Link: http://lkml.kernel.org/r/20190606140852.GB13440@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@aculab.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
syscall paths.  This means that set_user_sigmask() can save ->blocked in
->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
was modified.

This way the callers do not need 2 sigset_t's passed to set/restore and
restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
into the trivial helper which just calls restore_saved_sigmask().

Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Wong <e@80x24.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct sighand_struct::siglock field is the most used field by far, put
it first so that is can be accessed without IMM8 or IMM32 encoding on
x86_64.

Space savings (on trimmed down VM test config):

add/remove: 0/0 grow/shrink: 8/68 up/down: 49/-1147 (-1098)
Function                                     old     new   delta
complete_signal                              512     533     +21
do_signalfd4                                 335     346     +11
__cleanup_sighand                             39      43      +4
unhandled_signal                              49      52      +3
prepare_signal                               692     695      +3
ignore_signals                                37      40      +3
__tty_check_change.part                      248     251      +3
ksys_unshare                                 780     781      +1
sighand_ctor                                  33      29      -4
ptrace_trap_notify                            60      56      -4
sigqueue_free                                 98      91      -7
run_posix_cpu_timers                        1389    1382      -7
proc_pid_status                             2448    2441      -7
proc_pid_limits                              344     337      -7
posix_cpu_timer_rearm                        222     215      -7
posix_cpu_timer_get                          249     242      -7
kill_pid_info_as_cred                        243     236      -7
freeze_task                                  197     190      -7
flush_old_exec                              1873    1866      -7
do_task_stat                                3363    3356      -7
do_send_sig_info                              98      91      -7
do_group_exit                                147     140      -7
init_sighand                                2088    2080      -8
do_notify_parent_cldstop                     399     391      -8
signalfd_cleanup                              50      41      -9
do_notify_parent                             557     545     -12
__send_signal                               1029    1017     -12
ptrace_stop                                  590     577     -13
get_signal                                  1576    1563     -13
__lock_task_sighand                          112      99     -13
zap_pid_ns_processes                         391     377     -14
update_rlimit_cpu                             78      64     -14
tty_signal_session_leader                    413     399     -14
tty_open_proc_set_tty                        149     135     -14
tty_jobctrl_ioctl                            936     922     -14
set_cpu_itimer                               339     325     -14
ptrace_resume                                226     212     -14
ptrace_notify                                110      96     -14
proc_clear_tty                                81      67     -14
posix_cpu_timer_del                          229     215     -14
kernel_sigaction                             156     142     -14
getrusage                                    977     963     -14
get_current_tty                               98      84     -14
force_sigsegv                                 89      75     -14
force_sig_info                               205     191     -14
flush_signals                                 83      69     -14
flush_itimer_signals                          85      71     -14
do_timer_create                             1120    1106     -14
do_sigpending                                 88      74     -14
do_signal_stop                               537     523     -14
cgroup_init_fs_context                       644     630     -14
call_usermodehelper_exec_async               402     388     -14
calculate_sigpending                          58      44     -14
__x64_sys_timer_delete                       248     234     -14
__set_current_blocked                         80      66     -14
__ptrace_unlink                              310     296     -14
__ptrace_detach.part                         187     173     -14
send_sigqueue                                362     347     -15
get_cpu_itimer                               214     199     -15
signalfd_poll                                175     159     -16
dequeue_signal                               340     323     -17
do_getitimer                                 192     174     -18
release_task.part                           1060    1040     -20
ptrace_peek_siginfo                          408     387     -21
posix_cpu_timer_set                          827     806     -21
exit_signals                                 437     416     -21
do_sigaction                                 541     520     -21
do_setitimer                                 485     464     -21
disassociate_ctty.part                       545     517     -28
__x64_sys_rt_sigtimedwait                    721     679     -42
__x64_sys_ptrace                            1319    1277     -42
ptrace_request                              1828    1782     -46
signalfd_read                                507     459     -48
wait_consider_task                          2027    1971     -56
do_coredump                                 3672    3616     -56
copy_process.part                           6936    6871     -65

Link: http://lkml.kernel.org/r/20190503192800.GA18004@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check whether PTRACE_GET_SYSCALL_INFO semantics implemented in the
kernel matches userspace expectations.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190510152852.GG28558@altlinux.orgSigned-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NShuah Khan <shuah@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.

There are two reasons for a special syscall-related ptrace request.

Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls.  Some examples include:

 * The notorious int-0x80-from-64-bit-task issue. See [1] for details.
   In short, if a 64-bit task performs a syscall through int 0x80, its
   tracer has no reliable means to find out that the syscall was, in
   fact, a compat syscall, and misidentifies it.

 * Syscall-enter-stop and syscall-exit-stop look the same for the
   tracer. Common practice is to keep track of the sequence of
   ptrace-stops in order not to mix the two syscall-stops up. But it is
   not as simple as it looks; for example, strace had a (just recently
   fixed) long-standing bug where attaching strace to a tracee that is
   performing the execve system call led to the tracer identifying the
   following syscall-exit-stop as syscall-enter-stop, which messed up
   all the state tracking.

 * Since the introduction of commit 84d77d3f ("ptrace: Don't allow
   accessing an undumpable mm"), both PTRACE_PEEKDATA and
   process_vm_readv become unavailable when the process dumpable flag is
   cleared. On such architectures as ia64 this results in all syscall
   arguments being unavailable for the tracer.

Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee.  For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.

ptrace(2) man page:

long ptrace(enum __ptrace_request request, pid_t pid,
            void *addr, void *data);
...
PTRACE_GET_SYSCALL_INFO
       Retrieve information about the syscall that caused the stop.
       The information is placed into the buffer pointed by "data"
       argument, which should be a pointer to a buffer of type
       "struct ptrace_syscall_info".
       The "addr" argument contains the size of the buffer pointed to
       by "data" argument (i.e., sizeof(struct ptrace_syscall_info)).
       The return value contains the number of bytes available
       to be written by the kernel.
       If the size of data to be written by the kernel exceeds the size
       specified by "addr" argument, the output is truncated.

[ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO]
  Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org
Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.orgSigned-off-by: NElvira Khabirova <lineprinter@altlinux.org>
Co-developed-by: NDmitry V. Levin <ldv@altlinux.org>
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

syscall_get_error() is required to be implemented on this architecture in
addition to already implemented syscall_get_nr(), syscall_get_arguments(),
syscall_get_return_value(), and syscall_get_arch() functions in order to
extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152824.GE28558@altlinux.orgSigned-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

syscall_get_error() is required to be implemented on all architectures in
addition to already implemented syscall_get_nr(), syscall_get_arguments(),
syscall_get_return_value(), and syscall_get_arch() functions in order to
extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152812.GD28558@altlinux.orgSigned-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

syscall_get_error() is required to be implemented on all architectures
in addition to already implemented syscall_get_nr(),
syscall_get_arguments(), syscall_get_return_value(), and
syscall_get_arch() functions in order to extend the generic ptrace API
with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152803.GC28558@altlinux.orgSigned-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NPaul Burton <paul.burton@mips.com>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

syscall_get_* functions are required to be implemented on all
architectures in order to extend the generic ptrace API with
PTRACE_GET_SYSCALL_INFO request.

This adds remaining 2 syscall_get_* functions as documented in
asm-generic/syscall.h: syscall_get_error and syscall_get_return_value.

Link: http://lkml.kernel.org/r/20190510152756.GB28558@altlinux.orgSigned-off-by: NDmitry V. Levin <ldv@altlinux.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.

There are two reasons for a special syscall-related ptrace request.

Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls.  Some examples include:

 * The notorious int-0x80-from-64-bit-task issue. See [1] for details.
   In short, if a 64-bit task performs a syscall through int 0x80, its
   tracer has no reliable means to find out that the syscall was, in
   fact, a compat syscall, and misidentifies it.

 * Syscall-enter-stop and syscall-exit-stop look the same for the
   tracer. Common practice is to keep track of the sequence of
   ptrace-stops in order not to mix the two syscall-stops up. But it is
   not as simple as it looks; for example, strace had a (just recently
   fixed) long-standing bug where attaching strace to a tracee that is
   performing the execve system call led to the tracer identifying the
   following syscall-exit-stop as syscall-enter-stop, which messed up
   all the state tracking.

 * Since the introduction of commit 84d77d3f ("ptrace: Don't allow
   accessing an undumpable mm"), both PTRACE_PEEKDATA and
   process_vm_readv become unavailable when the process dumpable flag is
   cleared. On such architectures as ia64 this results in all syscall
   arguments being unavailable for the tracer.

Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee.  For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.

PTRACE_GET_SYSCALL_INFO returns the following structure:

struct ptrace_syscall_info {
	__u8 op;	/* PTRACE_SYSCALL_INFO_* */
	__u32 arch __attribute__((__aligned__(sizeof(__u32))));
	__u64 instruction_pointer;
	__u64 stack_pointer;
	union {
		struct {
			__u64 nr;
			__u64 args[6];
		} entry;
		struct {
			__s64 rval;
			__u8 is_error;
		} exit;
		struct {
			__u64 nr;
			__u64 args[6];
			__u32 ret_data;
		} seccomp;
	};
};

The structure was chosen according to [2], except for the following
changes:

 * seccomp substructure was added as a superset of entry substructure

 * the type of nr field was changed from int to __u64 because syscall
   numbers are, as a practical matter, 64 bits

 * stack_pointer field was added along with instruction_pointer field
   since it is readily available and can save the tracer from extra
   PTRACE_GETREGS/PTRACE_GETREGSET calls

 * arch is always initialized to aid with tracing system calls such as
   execve()

 * instruction_pointer and stack_pointer are always initialized so they
   could be easily obtained for non-syscall stops

 * a boolean is_error field was added along with rval field, this way
   the tracer can more reliably distinguish a return value from an error
   value

strace has been ported to PTRACE_GET_SYSCALL_INFO.  Starting with
release 4.26, strace uses PTRACE_GET_SYSCALL_INFO API as the preferred
mechanism of obtaining syscall information.

[1] https://lore.kernel.org/lkml/CA+55aFzcSVmdDj9Lh_gdbz1OzHyEm6ZrGPBDAJnywm2LF_eVyg@mail.gmail.com/
[2] https://lore.kernel.org/lkml/CAObL_7GM0n80N7J_DFw_eQyfLyzq+sf4y2AvsCCV88Tb3AwEHA@mail.gmail.com/

This patch (of 7):

All syscall_get_*() and syscall_set_*() functions must be defined as
static inline as on all other architectures, otherwise asm/syscall.h
cannot be included in more than one compilation unit.

This bug has to be fixed in order to extend the generic
ptrace API with PTRACE_GET_SYSCALL_INFO request.

Link: http://lkml.kernel.org/r/20190510152749.GA28558@altlinux.org
Fixes: 1932fbe3 ("nds32: System calls handling")
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Reported-by: Nkbuild test robot <lkp@intel.com>
Acked-by: NGreentime Hu <greentime@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Helge Deller <deller@gmx.de>	[parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change return type of dirty_one_transaction from int to void.  As this
function always return success.

Fixes below issue reported by coccicheck:

  fs/reiserfs/journal.c:1690:5-8: Unneeded variable: "ret".  Return "0" on line 1719

Link: http://lkml.kernel.org/r/20190702175430.GA5882@hari-Inspiron-1545Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bharath Vedartham <linux.bhar@gmail.com>
Cc: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes gcc '-Wunused-but-set-variable' warning:

  fs/ufs/super.c: In function ufs_statfs:
  fs/ufs/super.c:1409:32: warning: variable usb3 set but not used [-Wunused-but-set-variable]

It is not used since commmit c596961d ("ufs: fix s_size/s_dsize
users")

Link: http://lkml.kernel.org/r/20190525140654.15924-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

strncpy() was used to copy a fixed size buffer.  Since NUL-terminating
string is not required here, prefer a memcpy function.  The generated
code (ppc32) remains the same.

Silence the following warning triggered using W=1:

  fs/hfsplus/xattr.c:410:3: warning: 'strncpy' output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation]

Link: http://lkml.kernel.org/r/20190529113341.11972-1-malat@debian.orgSigned-off-by: NMathieu Malaterre <malat@debian.org>
Reviewed-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for partial file caching in Coda.  Every read, write
and mmap informs the userspace cache manager about what part of a file
is about to be accessed so that the cache manager can ensure the
relevant parts are available before the operation is allowed to proceed.

When a read or write operation completes, this is also reported to allow
the cache manager to track when partially cached content can be
released.

If the cache manager does not support partial file caching, or when the
entire file has been fetched into the local cache, the cache manager may
return an EOPNOTSUPP error to indicate that intent upcalls are no longer
necessary until the file is closed.

[akpm@linux-foundation.org: little whitespace fixup]
Link: http://lkml.kernel.org/r/20190618181301.6960-1-jaharkes@cs.cmu.eduSigned-off-by: NPedro Cuadra <pjcuadra@gmail.com>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch moves cfi check in coda_ftoc() instead of repeating it in the
wild.

  Module size
     text	   data	    bss	    dec	    hex	filename
    28297	   1040	    700	  30037	   7555	fs/coda/coda.ko.before
    28263	    980	    700	  29943	   74f7	fs/coda/coda.ko.after

Link: http://lkml.kernel.org/r/a2c27663ec4547018c92d71c63b1dff4650b6546.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

coda_fid_to_inode() is only called by coda_downcall() where sb is already
being tested.

Link: http://lkml.kernel.org/r/d2163b3136348faf83ba47dc2d65a5d0a9a135dd.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Inspired by NFS sysctl process

Link: http://lkml.kernel.org/r/9afcc2cd09490849b309786bbf47fef75de7f91c.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

init_coda_psdev() was only called by __init function.

Link: http://lkml.kernel.org/r/a12a5a135fa6b0ea997e1a0af4be0a235c463a24.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

max_t expression was already defined in coda sources

Link: http://lkml.kernel.org/r/e6cda497ce8691db155cb35f8d13ea44ca6cedeb.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can safely destroy vc_mutex at the end of umount process.

Link: http://lkml.kernel.org/r/f436f68908c467c5663bc6a9251b52cd7b95d2a5.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nothing is left in this header that is used by userspace.

Link: http://lkml.kernel.org/r/bb11378cef94739f2cf89425dd6d302a52c64480.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move include/linux/coda_psdev.h to fs/coda/ as there's nothing else that
uses it.

Link: http://lkml.kernel.org/r/3ceeee0415a929b89fb02700b6b4b3a07938acb8.1558117389.git.jaharkes@cs.cmu.edu
Link: https://patchwork.kernel.org/patch/10590257/Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The out of tree module version had been bumped several times already,
but we haven't kept this in-tree one in sync, partly because most
changes go from here to the out-of-tree copy.

Link: http://lkml.kernel.org/r/8b0ab50a2da2f0180ac32c79d91811b4d1d0bd8b.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The CODA_FREE() macro just calls kvfree().  We can call that directly
instead.

Link: http://lkml.kernel.org/r/4950a94fd30ec5f84835dd4ca0bb67c0448672f5.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These days we have kvzalloc() so we can delete CODA_ALLOC().

I made a couple related changes in coda_psdev_write().  First, I added
some error handling to avoid a NULL dereference if the allocation
failed.  Second, I used kvmalloc() instead of kvzalloc() because we copy
over the memory on the next line so there is no need to zero it first.

Link: http://lkml.kernel.org/r/e56010c822e7a7cbaa8a238cf82ad31c67eaa800.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the 32-bit time_t problems to userspace.

Link: http://lkml.kernel.org/r/8d089068823bfb292a4020f773922fbd82ffad39.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We exchange file timestamps with user space using psdev device
read/write operations with a fixed but architecture specific binary
layout.

On 32-bit systems, this uses a 'timespec' structure that is defined by
the C library to contain two 32-bit values for seconds and nanoseconds.
As we get ready for the year 2038 overflow of the 32-bit signed seconds,
the kernel now uses 64-bit timestamps internally, and user space will do
the same change by changing the 'timespec' definition in the future.

Unfortunately, this breaks the layout of the coda_vattr structure, so we
need to redefine that in terms of something that does not change.  I'm
introducing a new 'struct vtimespec' structure here that keeps the
existing layout, and the same change has to be done in the coda user
space copy of linux/coda.h before anyone can use that on a 32-bit
architecture with 64-bit time_t.

An open question is what should happen to actual times past y2038, as
they are now truncated to the last valid date when sent to user space,
and interpreted as pre-1970 times when a timestamp with the MSB set is
read back into the kernel.  Alternatively, we could change the new
timespec64_to_coda()/coda_to_timespec64() functions to use a different
interpretation and extend the available range further to the future by
disallowing past timestamps.  This would require more changes in the
user space side though.

Link: http://lkml.kernel.org/r/562b7324149461743e4fbe2fedbf7c242f7e274a.1558117389.git.jaharkes@cs.cmu.edu
Link: https://patchwork.kernel.org/patch/10474735/Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu>
Acked-by: NJan Harkes <jaharkes@cs.cmu.edu>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>