The current interrupt handler is getting increasingly complicated and
Xe_HP changes will bring even more complexity.  Let's split off a new
interrupt handler starting with DG1 (i.e., when the master tile
interrupt register was added to the design) and use that as the basis
for the new Xe_HP changes.

Now that we track the hardware IP's release number as well as the
version number, we can also properly define DG1 has version "12.10" and
replace the has_master_unit_irq feature flag with an IP version test.

Bspec: 50875
Cc: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NTomasz Lis <tomasz.lis@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-5-matthew.d.roper@intel.com

Implements changes around PSR for alderlake-P:

- EDP_SU_TRACK_ENABLE was removed and bit 30 now has other function
- Some bits of PSR2_MAN_TRK_CTL moved and SF_PARTIAL_FRAME_UPDATE was
  removed setting SU_REGION_START/END_ADDR will do this job
- SU_REGION_START/END_ADDR have now line granularity but will need to
  be aligned with DSC when the PSRS + DSC support lands

BSpec: 50422
BSpec: 50424
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625235600.765677-1-jose.souza@intel.com

The PUNIT FW is currently returning 0 for all memory bandwidth
parameters. Read the values directly from MCHBAR offsets 0x5918 and
0x4000(4).

v2 (Lucas): tidy up checking for ret slightly
v3 (Lucas):
  - Squash change to double the memory bandwidth based on
    MCHBAR Gear_type
  - Move ICL_GEAR_TYPE_MASK to the appropriate place and change prefix
    to DG1
  - Move register definitions to i915_reg.h
  - Make the MCHBAR path permanent for DG1
  - Convert to REG_BIT()/REG_GENMASK()
v4: Drop unneeded initializations

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708175226.2451260-1-lucas.demarchi@intel.com

_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.

Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.

That is a regression introduced in the refactor done in
commit 351221ff ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.

BSpec: 50286
Fixes: 351221ff ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com
(cherry picked from commit 3352d86d)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.

Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.

That is a regression introduced in the refactor done in
commit 351221ff ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.

BSpec: 50286
Fixes: 351221ff ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com

In some modes there is not enough time during hblank to transmit PSR2
SDP plus the pixels CRC SDP, if such case happens PSR2 needs to be
disabled.
But eDP spec 1.4b allows to transmit PSR2 SDP in a prior scanline
alone and than later the CRC SDP, allowing PSR2 to be enabled in
those hblank constrained modes.

BSpec: 49274
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-4-jose.souza@intel.com

Another WA that is required for PSR2.

BSpec: 54369
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-3-jose.souza@intel.com

The PSR2_CTL io buffer wake and fast wake values do not match
expected in pre production hardware, so here adding a table that
matches with HW to program it with values that HW expect.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616203158.118111-2-jose.souza@intel.com

This patch adds Pipe A plumbing to the already
existing parsing and loading functions which is
taken care of in the prep patches. Adding MAX_DMC_FW
to keep track for both Main and Pipe A DMC while loading
the respective blobs.

Also adding present field in dmc_info.
s/find_dmc_fw_offset/csr_set_dmc_fw_offset. While at it add
fw_info_matches_stepping() helper. CSR_PROGRAM() should now
take the starting address of the particular blob (Main or Pipe)
and not hardcode it.

v2: Add dmc_offset and start_mmioaddr fields for dmc_info struct.

v3: Add a missing corner cases of stepping-substepping combination in
fw_info_matches_stepping() helper.

v4: Add macro for start_mmioaddr for V1 package. Simplify code
in dmc_set_fw_offset (Lucas)

Cc: Souza, Jose <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-3-anusha.srivatsa@intel.com

When pipe A is disabled and MIPI DSI is enabled on pipe B,
the AMT KVMR feature will incorrectly see pipe A as enabled.
Set 0x42080 bit 23=1 before enabling DSI on pipe B and leave
it set while DSI is enabled on pipe B. No impact to setting
it all the time.

Changes since V5:
	- Added reviewed-by
	- Removed redundant braces and debug message format - Imre
Changes since V4:
        - Modified function comment Wa_<number>:icl,jsl,ehl - Lucas
        - Modified debug message in sync state - Imre
Changes since V3:
        - More meaningful name to workaround - Imre
        - Remove boolean check clear flag
        - Add WA_verify hook in dsi sync_state
Changes since V2:
        - Used REG_BIT, ignored pipe A and used sw state check - Jani
        - Made function wrapper - Jani
Changes since V1:
        - ./dim checkpatch errors addressed
Signed-off-by: NTejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210615105613.851491-1-tejaskumarx.surendrakumar.upadhyay@intel.com

CDCLK crawl feature allows to change CDCLK frequency
without disabling the actual PLL and doesn't require
a full modeset.

v2: - Added has_cdclk_crawl as a feature flag to
      intel_device_info(Matt Roper)
    - s/gen13_cdclk_pll_crawl/adlp_cdclk_pll_crawl/
      (Matt Roper)

Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603065038.7298-1-stanislav.lisovskiy@intel.com

For some reason coccinelle misses a few cases in header files with calls to
INTEL_GEN()/IS_GEN(). Do a manual conversion for those.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-6-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-3-lucas.demarchi@intel.com

The WA requires the following procedure for VDBox SFC reset:

If (MFX-SFC usage is 1) {
	1.Issue a MFX-SFC forced lock
	2.Wait for MFX-SFC forced lock ack
	3.Check the MFX-SFC usage bit
	If (MFX-SFC usage bit is 1)
		Reset VDBOX and SFC
	else
		Reset VDBOX
	Release the force lock MFX-SFC
}
else if(HCP+SFC usage is 1) {
	1.Issue a VE-SFC forced lock
	2.Wait for SFC forced lock ack
	3.Check the VE-SFC usage bit
	If (VE-SFC usage bit is 1)
		Reset VDBOX
	else
		Reset VDBOX and SFC
	Release the force lock VE-SFC.
}
else
	Reset VDBOX

- Restructure: the changes to the original code flow should stay
  relatively minimal; we only need to do an extra HCP check after the
  usual VD-MFX check and, if true, switch the register/bit we're
  performing the lock on.(MattR)

v2:
- Assign unlock mask using paired_engine->mask instead of using
  BIT(paired_vecs->id). (Daniele)

Bspec: 52890, 53509

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAditya Swarup <aditya.swarup@intel.com>
Co-developed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526094852.286424-2-aditya.swarup@intel.com

Implement Wa_22012358565 to avoid underrun with 32bpp cursor
in some high bandwidth scenarios. The implementation calls for
overriding the arbitration slots for the planes.

v2: Fix adlp_plane_ctl_arb_slots() return type
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-2-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

The FIFO underrun recovery mechanism has a boatload of cases
where it can't be used. The description is also a bit ambiguous
as it doesn't specify whether plane downscaling needs to be considered
or just pipe downscaling. We may not even have sufficient state
tracking to decide this on demand, so for now just disable the
whole thing.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-1-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield
replacing the pipeline full and deprecating the pipeline override
bit.

This patch adds this corresponding bitfield in the register defs,
crtc state vrr structure and populates this in vrr compute
config and vrr enable functions. It also adds the corresponding
HW state readout for this field.

Bspec: 50508
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com

XE_LPD brings enhanced underrun recovery:  the hardware can somewhat
mitigate underruns by using an interpolated replacement pixel (soft
underrun) or the previous pixel (hard underrun).  Furthermore, underruns
can now be caused downstream by the port, even if the pipe itself is
operating properly.  The interrupt register and PIPE_STATUS register
give us extra bits to recognize hard/soft underruns and determine
whether the underrun was caused by the port, so we'll use that
information to print some more descriptive errors when underruns occur.

v2:
 - Keep ICL's PIPE_STATUS defined separately from the old GMCH pipe
   status register.  (Ville)
 - Only read/clear the PIPE_STATUS register on platforms with
   display ver >= 11. (Lucas)
v3:
 - Actually enable+unmask all the new underrun interrupts, clear stale
   bits out from PIPE_STATUS before enabling the interrupts, report all
   FIFO underruns errors at once, rename a bunch of stuff to unconfuse
   vs. PIPESTAT. (Ville)

Bspec: 50335
Bspec: 50366
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-2-matthew.d.roper@intel.com

When scalers are enabled, we need to program underrun
bubble counter to 0x50 to avoid Soft Pipe A underruns.
Make sure other bits dont get overwritten.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-17-lucas.demarchi@intel.com

On ADL_P besides programming the PLL accordingly the DP/HDMI link rate
should be also programmed to the DDI_BUF_CTL register, do that.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-16-lucas.demarchi@intel.com

The clocks in ALD_P is similar to that of TGL.
The combo PLLs  use the same DPLL0, DPLL1 and TBT_PLL.

This patch adds the helper function intel_mg_pll_enable_reg()
which is similar to intel_combo_pll_enable_reg() for being lookup
place for PLL_ENABLE register in combo phy cases.

Bspec: 55409,55316
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-15-lucas.demarchi@intel.com

Today when the DSI controller is paired with the Combo-PHY it
uses the high-speed (HS) Word clock for its low power (LP)
transmit PPI communication to the DPHY. The interface signaling
only changes state at an Escape clock frequency (i.e. its
effectively running on a virtual Tx Escape clock that is controlled
by counters w/in the controller), but all the interface flops are
running off the HS clock.

This has the following drawbacks:

 * It is a deviation from the PPI spec which assumes signaling is
   running on a physical Escape clock
 * The PV timings are over constrained (HS timed to 312.5MHz vs.
   an Escape clock of 20MHz max)

This feature is proposing to change the LP Tx communication between
the controller and the DPHY from a virtual Tx Escape clock to a physical
clock.

To do this we need to program two "M" divisors. One for the usual
DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV register and one for MIPIO_DWORD8.

For DSI_ESC_CLK_DIV and DPHY_ESC_CLK_DIV registers the "M" is calculated
as following

Nt = ceil(f_link/160) (theoretical word clock)
Nact = max[3, Nt + (Nt + 1)%2] (actual word clock)
M = Nact * 8

For MIPIO_DWORD8 register, the divisor "M" is calculated as following

M = (Nact - 1)/2

BSpec: 55171

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-11-lucas.demarchi@intel.com

Update MBUS_CTL register if the 2 mbus can be joined as per the current
DDB allocation and active pipes, also update hashing mode and pipe
select bits as  per the sequence mentioned in the bspec.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-10-lucas.demarchi@intel.com

On adlp the two mbuses have two display pipes and
two DBUFS, Pipe A and D on Mbus1 and Pipe B and C on
Mbus2. The Mbus can be joined and all the DBUFS can be
used on Pipe A or B.

Bspec: 49255
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-8-lucas.demarchi@intel.com

ADL-P have basically the same TC connection and disconnection
sequences as ICL and TGL, the major difference is the new registers.

So here adding functions without the icl prefix in the name and
making the new functions call the platform specific function to access
the correct register.

v2:
 - Retain DDI TC PHY ownership flag during modesetting.

BSpec: 55480
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-6-lucas.demarchi@intel.com

XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms.  However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.

Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519000625.3184321-4-lucas.demarchi@intel.com

Rename all occurences of CSR_* with DMC_*

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-4-anusha.srivatsa@intel.com

Adding a new hook to ADL-P just to avoid another platform check in
gen12lp_init_clock_gating() but also open to it.

BSpec: 54369
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-18-matthew.d.roper@intel.com

Respective bit for master or slave to be set for uncompressed
bigjoiner in dss_ctl1 register.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-16-matthew.d.roper@intel.com

Disable loadgen sharing for DP link rate 1.62 GHz and HDMI 5.94 GHz.
For all other modes, we can enable loadgen sharing feature.

BSpec: 55359

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-13-matthew.d.roper@intel.com

ADL-P further extends the bits in PLANE_WM that represent blocks and
lines; we need to extend our masks accordingly.  Since these bits are
reserved and MBZ on earlier platforms, it's safe to use the larger
bitmask on all platforms.

Bspec: 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NClinton Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-8-matthew.d.roper@intel.com

XE_LPD continues to use the same "skylake-style" watermark
programming as other recent platforms.  The only change to the watermark
calculations compared to Display12 is that XE_LPD now allows a
maximum of 255 lines vs the old limit of 31.

Due to the larger possible lines value, the corresponding bits
representing the value in PLANE_WM are also extended, so make sure we
read/write enough bits.  Let's also take this opportunity to switch over
to the REG_FIELD notation.

Bspec: 49325
Bspec: 50419
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-3-matthew.d.roper@intel.com

Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-6-matthew.d.roper@intel.com

Aside from the hardware-managed PG0, XE_LPD has power wells 1-2 and
A-D.  These power wells should be enabled/disabled according to the
following dependency tree (enable top to bottom, disable bottom to top):

               PG0
                |
             --PG1--
            /       \
          PGA     --PG2--
                 /   |   \
               PGB  PGC  PGD

PWR_WELL_CTL follows the general ICL/TGL design and places PG A-D in the
bits that would have been PG 6-9 under the old scheme.

PWR_WELL_CTL_{DDI,AUX}'s bit indexing for DDI's A-C and TC1 is the same
as TGL, but DDI-D is placed at index 7 (bits 14 & 15).

v2:
 - Squash in LPSP status patch from Uma since it's also a
   powerwell-specific change.

Bspec: 49233
Bspec: 49503
Bspec: 49504
Bspec: 49505
Bspec: 49296
Bspec: 50090
Bspec: 53920
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-4-matthew.d.roper@intel.com

XE_LPD has new AUX interrupt bits for DDI-D and DDI-E that take the
spots that were used by TC5/TC6 on Display12 platforms.

While we're at it, let's convert the bit definitions for all TGL+ aux
bits over to the modern REG_BIT() notation.

v2:
 - Maintain bit order rather than logical order.  (Lucas)
 - Convert surrounding code to REG_BIT() notation.  (Lucas)

Bspec: 50064
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512042144.2089071-2-matthew.d.roper@intel.com

XE_LPD supports plane strides up to 128KB.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NJuha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-7-imre.deak@intel.com

These are the 965g/g45/g33 specific DRB registers. Give them
a suitable suffix so we can add their counterparts for other
platforms.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421153401.13847-4-ville.syrjala@linux.intel.com

EDP_Y_COORDINATE_ENABLE became a reserved register in display 13.
EDP_Y_COORDINATE_VALID have the same fate as EDP_Y_COORDINATE_ENABLE
but as we don't need it, removing the macro definition of it.

BSpec: 50422
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421220224.200729-2-jose.souza@intel.com

Add "REGION_STOLEN" device info to dg1, create stolen memory
region from upper portion of local device memory, starting
from DSMBASE.

v2:
    - s/drm_info/drm_dbg; userspace likely doesn't care about stolen.
    - mem->type is only setup after the region probe, so setting the name
      as stolen-local or stolen-system based on this value won't work. Split
      system vs local stolen setup to fix this.
    - kill all the region->devmem/is_devmem stuff. We already differentiate
      the different types of stolen so such things shouldn't be needed
      anymore.
v3:
    - split stolen lmem vs smem ops(Tvrtko)
    - add shortcut for stolen region in i915(Tvrtko)
    - sanity check dsm base vs bar size(Xinyun)
v4(Tvrtko):
    - more cleanup
    - add some TODOs
Signed-off-by: NCQ Tang <cq.tang@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xinyun Liu <xinyun.liu@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421104658.304142-1-matthew.auld@intel.com

Boot firmware performs memory training and health assessment during
startup.  If the memory training fails, the firmware will consider the
GPU unusable and will instruct the punit to keep the GT powered down.
If this happens, our driver will be unable to communicate with the GT
(all GT registers will read back as 0, forcewake requests will timeout,
etc.) so we should abort driver initialization if this happens.  We can
confirm that LMEM was initialized successfully via sgunit register
GU_CNTL.

Bspec: 53111
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Cc: Caz Yokoyama <Caz.Yokoyama@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210420131842.164163-5-matthew.auld@intel.com

This WA fix some display glitches when the system is under high
memory pressure.

BSpec: 52890
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408204917.254272-1-jose.souza@intel.com