Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above
source address information is stored as an entry in GMV table. The users
just need to provide the index to the hardware when POST SEND.

Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The
driver needs to allocate memory for it and tell the information about this
region to hardware.

Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The doorbell needs to store PI information into QPC, so the RoCEE should
wait for the results of storing, that is, it needs two bus operations to
complete a doorbell. When ROCEE is in SDI mode, multiple doorbells may be
interlocked because the RoCEE can only handle bus operations serially. So a
flag to mark if HIP09 is working in SDI mode is added. When the SDI flag is
set, the ROCEE will ignore the PI information of the doorbell, continue to
fetch wqe and verify its validity by it's owner_bit.

Link: https://lore.kernel.org/r/1603195493-22741-1-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Each driver should check that it can support the provided attr_mask during
modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block
modify_qp_ex because the driver didn't check RATE_LIMIT.

Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.comSigned-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP08 supports RC inline up to size of 32 Bytes, and all data should be
put into SQWQE. For HIP09, this capability is extended to 1024 Bytes, if
length of data is longer than 32 Bytes, they will be filled into extended
sge space.

Link: https://lore.kernel.org/r/1599744069-9968-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The sq_sig_type field should be filled when querying QP, or the users may
get a wrong value.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-9-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The hardware will add AckReq flag in BTH header according to the value of
ack_req_freq to request ACK from responder for the packets with this flag.
It should be greater than or equal to lp_pktn_ini instead of using a fixed
value.

Fixes: 7b9bd73e ("RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC")
Link: https://lore.kernel.org/r/1600509802-44382-8-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The rnr_retry returned to the user is not correct, it should be got from
another fields in QPC.

Fixes: bfe86035 ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1600509802-44382-7-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

calc_pg_sz() may gets a data calculation overflow if the PAGE_SIZE is 64 KB
and hop_num is 2. It is because that all variables involved in calculation
are defined in type of int. So change the type of bt_chunk_size,
buf_chunk_size and obj_per_chunk_default to u64.

Fixes: ba6bb7e9 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1600509802-44382-6-git-send-email-liweihang@huawei.comSigned-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the the value of sl is larger than 7, if so,
an exception should be returned.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1600509802-44382-5-git-send-email-liweihang@huawei.comSigned-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP08 doesn't support modifying the maximum number of outstanding WR in an
SRQ. However, the driver does not return a failure message, and users may
mistakenly think that the resizing is executed successfully. So the driver
needs to intercept this operation.

Fixes: ffb1308b ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1600509802-44382-3-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

According to the IB specifications, the verbs should return an immediate
error when the users set an unsupported opcode. Furthermore, refactor codes
about opcode in process of post_send to make the difference between opcodes
clearer.

Link: https://lore.kernel.org/r/1600509802-44382-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

For HIP09, size of SCCC (Soft Congestion Control Context) is increased to
64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC
from driver instead of using a fixed value.

Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using QPC in size of 256B or 512B, so
that HIP09 can supports new congestion control algorithms by using QPC in
larger size.

Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.

Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The new version of RoCEE supports using CEQE in size of 4B or 64B, AEQE in
size of 16B or 64B. The performance of bus can be improved by using larger
size of EQE.

Link: https://lore.kernel.org/r/1600245806-56321-2-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Some variables have been initialized when used. As a result, here removes
some unncessary initial assignment.

Link: https://lore.kernel.org/r/1599547944-30671-1-git-send-email-oulijun@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The UDP source port number in RoCE v2 is used to create entropy for
network routers (ECMP), load balancers and 802.3ad link aggregation
switching that are not aware of RoCE IB headers. Considering that the IB
core has achieved a new interface to get a hashed value of it, the fixed
value of it in QPC and UD WQE in hns driver could be fixed and the port
number is to be set dynamically now.

For QPC of RC, the value could be hashed from flow_lable if the user pass
it in or from remote qpn and local qpn. For WQE of UD, it is set according
to fl or as a random value.

Link: https://lore.kernel.org/r/1598002289-8611-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.

This reverts commit 711195e5.

Fixes: 711195e5 ("RDMA/hns: Reserve one sge in order to avoid local length error")
Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If the hns ROCEE reports a general error CQE (types not specified by the IB
General Specifications), it's no need to change the QP state to error, and
the driver should just skip it.

Fixes: 7c044adc ("RDMA/hns: Simplify the cqe code of poll cq")
Link: https://lore.kernel.org/r/1595932941-40613-8-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

One qp state migrations legal configuration was deleted mistakenly.

Fixes: 357f3429 ("RDMA/hns: Simplify the state judgment code of qp")
Link: https://lore.kernel.org/r/1595932941-40613-7-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The hns_roce_cmq_setup_basic_desc() can clear the whole desc, so removes
these redundant memset operations.

Link: https://lore.kernel.org/r/1595932941-40613-6-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There are some functions called by set_rc_wqe() use two parameters:
"void *wqe" and "struct hns_roce_v2_rc_send_wqe *rc_sq_wqe", but the first
one can be got from the second one. So remove the redundant wqe from
related functions.

Link: https://lore.kernel.org/r/1595932941-40613-5-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HIP08_A is an temporary version and all features of it are supported by
HIP08_B. So remove the relevant code.

Link: https://lore.kernel.org/r/1595932941-40613-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The parts about preparing and sending mailbox to hardware is not strongly
related to other codes in hns_roce_v2_set_hem(), and can be encapsulated
into a separate function.

Link: https://lore.kernel.org/r/1595932941-40613-3-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

HNS_ROCE_SQ_OPCODE_XXXs and HNS_ROCE_V2_WQE_OP_XXXs have same values, so
remove a set of redundant definitions. In addition, remove the suffix of
HNS_ROCE_V2_WQE_OP_BIND_MW_TYPE.

Link: https://lore.kernel.org/r/1595932941-40613-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The RoCE Engine will schedule to another QP after one has sent
(2 ^ lp_pktn_ini) packets. lp_pktn_ini is set in QPC and should be
calculated from 2 factors:

1. current MTU as a integer
2. the RoCE Engine's maximum slice length 64KB

But the driver use MTU as a enum ib_mtu and the max inline capability, the
lp_pktn_ini will be much bigger than expected which may cause traffic of
some QPs to never get scheduled.

Fixes: b713128d ("RDMA/hns: Adjust lp_pktn_ini dynamically")
Link: https://lore.kernel.org/r/1594726138-49294-1-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If hns ROCEE is set to level-0 addressing, the length of the entire buffer
can be used as the page size. The driver needn't to split the buffer into
small units because all pages are continuous.

Link: https://lore.kernel.org/r/1593525696-12570-1-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If a IMP reset caused by some hardware errors and hns RoCE driver reset
occurred at the same time, there is a possiblity that the IMP will stop
dealing with command and users can't use the hardware. The logs are as
follows:

 hns3 0000:fd:00.1: cleaned 0, need to clean 1
 hns3 0000:fd:00.1: firmware version query failed -11
 hns3 0000:fd:00.1: Cmd queue init failed
 hns3 0000:fd:00.1: Upgrade reset level
 hns3 0000:fd:00.1: global reset interrupt

The hns NIC driver divides the reset process into 3 status:
initialization, hardware resetting and softwaring restting. RoCE driver
gets reset status by interfaces provided by NIC driver and commands will
not be sent to the IMP if the driver is in any above status. The main
reason for this issue is that there is a time gap between status 1 and 2,
if the RoCE driver sends commands to the IMP during this gap, the IMP will
stop working because it is not ready.

To eliminate the time gap, the hns NIC driver has added a new interface in
commit a4de0228 ("net: hns3: provide .get_cmdq_stat interface for the
client"), so RoCE driver can ensure that no commands will be sent during
resetting.

Link: https://lore.kernel.org/r/1592314778-52822-1-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ibmr.device is assigned after MR is successfully registered, but both
write_mtpt() and frmr_write_mtpt() accesses it during the mr registration
process, which may cause the following error when trying to register MR in
userspace and pbl_hop_num is set to 0.

  pc : hns_roce_mtr_find+0xa0/0x200 [hns_roce]
  lr : set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2]
  sp : ffff00023e73ba20
  x29: ffff00023e73ba20 x28: ffff00023e73bad8
  x27: 0000000000000000 x26: 0000000000000000
  x25: 0000000000000002 x24: 0000000000000000
  x23: ffff00023e73bad0 x22: 0000000000000000
  x21: ffff0000094d9000 x20: 0000000000000000
  x19: ffff8020a6bdb2c0 x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: 0000000000000000
  x13: 0140000000000000 x12: 0040000000000041
  x11: ffff000240000000 x10: 0000000000001000
  x9 : 0000000000000000 x8 : ffff802fb7558480
  x7 : ffff802fb7558480 x6 : 000000000003483d
  x5 : ffff00023e73bad0 x4 : 0000000000000002
  x3 : ffff00023e73bad8 x2 : 0000000000000000
  x1 : 0000000000000000 x0 : ffff0000094d9708
  Call trace:
   hns_roce_mtr_find+0xa0/0x200 [hns_roce]
   set_mtpt_pbl+0x54/0x118 [hns_roce_hw_v2]
   hns_roce_v2_write_mtpt+0x14c/0x168 [hns_roce_hw_v2]
   hns_roce_mr_enable+0x6c/0x148 [hns_roce]
   hns_roce_reg_user_mr+0xd8/0x130 [hns_roce]
   ib_uverbs_reg_mr+0x14c/0x2e0 [ib_uverbs]
   ib_uverbs_write+0x27c/0x3e8 [ib_uverbs]
   __vfs_write+0x60/0x190
   vfs_write+0xac/0x1c0
   ksys_write+0x6c/0xd8
   __arm64_sys_write+0x24/0x30
   el0_svc_common+0x78/0x130
   el0_svc_handler+0x38/0x78
   el0_svc+0x8/0xc

Solve above issue by adding a pointer of structure hns_roce_dev as a
parameter of write_mtpt() and frmr_write_mtpt(), so that both of these
functions can access it before finishing MR's registration.

Fixes: 9b2cf76c ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/1592314629-51715-1-git-send-email-liweihang@huawei.comSigned-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The "dmac" variable is used before it is initialized.

Fixes: 494c3b31 ("RDMA/hns: Refactor the QP context filling process related to WQE buffer configure")
Link: https://lore.kernel.org/r/20200529083918.GA1298465@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of i with the sge number of wr will make the comparision more
clear, that is, when the sge number in wr is small than the maximum
supported sge number in the queue, then a stop sge needed to be filled at
the end of sges in wr.

Link: https://lore.kernel.org/r/1590152579-32364-5-git-send-email-liweihang@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Set hns_roce_v2_cq_set_ci to inline type and remove unnecessary
next_cqe_sw_v2().

Link: https://lore.kernel.org/r/1590152579-32364-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to do a type cast on genernal pointers, they could be
assigned to any type of variables. In addition, optimize initialization of
some variables and adjust order of them.

Link: https://lore.kernel.org/r/1590152579-32364-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Split the code related to WQE buffer configure from the QPC filling
process into two functions: config_qp_sq_buf() and config_qp_rq_buf(),
this will make the code more readable.

Link: https://lore.kernel.org/r/1589982799-28728-9-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Number of sge/eqe is always non-negative, they should be defined in type
of unsigned.

Link: https://lore.kernel.org/r/1589982799-28728-8-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add unlikely() and likely() to optimize main I/O process code.

Link: https://lore.kernel.org/r/1589982799-28728-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It's easier to understand and maintain enable flags of cq using a single
field in type of u32 than defining a field for every flags in the
structure hns_roce_cq, and we can add new flags for features more
conveniently in the future.

Link: https://lore.kernel.org/r/1589982799-28728-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The hardware can truncate PI/CI when posting or polling, the driver does
not need to do truncation. Therefore keep the software's PI/CI consistent
with it in the hardware.

Link: https://lore.kernel.org/r/1589982799-28728-2-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When rq/srq sge length is smaller than sq sge length, it will produce a
local length error and may cause the bus to hang. Therefore, for rq wqe
and srq wqe, one reserved sge pointing to a reserved mr is used to avoid
this error.

Link: https://lore.kernel.org/r/1588931159-56875-10-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>