We are now keeping the MTU information synced between asoc, transport
and dst, which makes the check at sctp_packet_config() not needed
anymore. As it was the sole caller to this function, lets remove it.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Which makes sure that the MTU respects the minimum value of
SCTP_DEFAULT_MINSEGMENT and that it is correctly aligned.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No need for this helper.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

and avoid the open-coded versions of it.

Now sctp_datamsg_from_user can just re-use asoc->frag_point as it will
always be updated.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When given a MTU, this function calculates how much payload we can carry
on it. Without a MTU, it calculates the amount of header overhead we
have.

So that when we have extra overhead, like the one added for IP options
on SELinux patches, it is easier to handle it.
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

use proc_remove_subtree() for subtree removal, both on setup failure
halfway through and on teardown.  No need to make simple things
complex...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ip option support to allow LSM security modules to utilise CIPSO/IPv4
and CALIPSO/IPv6 services.
Signed-off-by: NRichard Haines <richard_c_haines@btinternet.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NPaul Moore <paul@paul-moore.com>

assign_number is added as a member of sctp_stream_interleave, used
to assign ssn for data or mid (message id) for idata, called in
sctp_packet_append_data. sctp_chunk_assign_ssn is left as it is,
and sctp_chunk_assign_mid is added for sctp_stream_interleave_1.

This procedure is described in section 2.2.2 of RFC8260.

All sizeof(struct sctp_data_chunk) in tx path is replaced with
sctp_datachk_len, to make it right for idata as well. And also
adjust sctp_chunk_is_data for SCTP_CID_I_DATA.

After this patch, idata can be built and sent in tx path.

Note that if sp strm_interleave is set, it has to wait_connect in
sctp_sendmsg, as asoc intl_enable need to be known after 4 shake-
hands, to decide if it should use data or idata later. data and
idata can't be mixed to send in one asoc.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most callers of rhashtable_walk_start don't care about a resize event
which is indicated by a return value of -EAGAIN. So calls to
rhashtable_walk_start are wrapped wih code to ignore -EAGAIN. Something
like this is common:

       ret = rhashtable_walk_start(rhiter);
       if (ret && ret != -EAGAIN)
               goto out;

Since zero and -EAGAIN are the only possible return values from the
function this check is pointless. The condition never evaluates to true.

This patch changes rhashtable_walk_start to return void. This simplifies
code for the callers that ignore -EAGAIN. For the few cases where the
caller cares about the resize event, particularly where the table can be
walked in mulitple parts for netlink or seq file dump, the function
rhashtable_walk_start_check has been added that returns -EAGAIN on a
resize event.
Signed-off-by: NTom Herbert <tom@quantonium.net>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now each stream sched ops is defined in different .c file and
added into the global ops in another .c file, it uses extern
to make this work.

However extern is not good coding style to get them in and
even make C=2 reports errors for this.

This patch adds sctp_sched_ops_xxx_init for each stream sched
ops in their .c file, then get them into the global ops by
calling them when initializing sctp module.

Fixes: 637784ad ("sctp: introduce priority based stream scheduler")
Fixes: ac1ed8b8 ("sctp: introduce round robin stream scheduler")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Now in sctp_setsockopt_maxseg user_frag or frag_point can be set with
val >= 8 and val <= SCTP_MAX_CHUNK_LEN. But both checks are incorrect.

val >= 8 means frag_point can even be less than SCTP_DEFAULT_MINSEGMENT.
Then in sctp_datamsg_from_user(), when it's value is greater than cookie
echo len and trying to bundle with cookie echo chunk, the first_len will
overflow.

The worse case is when it's value is equal as cookie echo len, first_len
becomes 0, it will go into a dead loop for fragment later on. In Hangbin
syzkaller testing env, oom was even triggered due to consecutive memory
allocation in that loop.

Besides, SCTP_MAX_CHUNK_LEN is the max size of the whole chunk, it should
deduct the data header for frag_point or user_frag check.

This patch does a proper check with SCTP_DEFAULT_MINSEGMENT subtracting
the sctphdr and datahdr, SCTP_MAX_CHUNK_LEN subtracting datahdr when
setting frag_point via sockopt. It also improves sctp_setsockopt_maxseg
codes.
Suggested-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reported-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 86fdb344 ("sctp: ensure ep is not destroyed before doing the
dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep
with holding sock and sock lock.

But Paolo noticed that endpoint could be destroyed in sctp_rcv without
sock lock protection. It means the use-after-free issue still could be
triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks
!ep, although it's pretty hard to reproduce.

I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close
and sctp_sock_dump long time.

This patch is to add another param cb_done to sctp_for_each_transport
and dump ep->assocs with holding tsp after jumping out of transport's
traversal in it to avoid this issue.

It can also improve sctp diag dump to make it run faster, as no need
to save sk into cb->args[5] and keep calling sctp_for_each_transport
any more.

This patch is also to use int * instead of int for the pos argument
in sctp_for_each_transport, which could make postion increment only
in sctp_for_each_transport and no need to keep changing cb->args[2]
in sctp_sock_filter and sctp_sock_dump any more.

Fixes: 86fdb344 ("sctp: ensure ep is not destroyed before doing the dump")
Reported-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_socket_type_t, and
replace with enum sctp_socket_type in the places where it's
using this typedef.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_state_t, and
replace with enum sctp_state in the places where it's
using this typedef.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_sock_state_t, and
replace with enum sctp_sock_state in the places where it's
using this typedef.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_scope_t, and
replace with enum sctp_scope in the places where it's
using this typedef.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_errhdr_t, and replace
with struct sctp_errhdr in the places where it's using this
typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit b1f5bfc2 ("sctp: don't dereference ptr before leaving
_sctp_walk_{params, errors}()") tried to fix the issue that it
may overstep the chunk end for _sctp_walk_{params, errors} with
'chunk_end > offset(length) + sizeof(length)'.

But it introduced a side effect: When processing INIT, it verifies
the chunks with 'param.v == chunk_end' after iterating all params
by sctp_walk_params(). With the check 'chunk_end > offset(length)
+ sizeof(length)', it would return when the last param is not yet
accessed. Because the last param usually is fwdtsn supported param
whose size is 4 and 'chunk_end == offset(length) + sizeof(length)'

This is a badly issue even causing sctp couldn't process 4-shakes.
Client would always get abort when connecting to server, due to
the failure of INIT chunk verification on server.

The patch is to use 'chunk_end <= offset(length) + sizeof(length)'
instead of 'chunk_end < offset(length) + sizeof(length)' for both
_sctp_walk_params and _sctp_walk_errors.

Fixes: b1f5bfc2 ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the length field of the iterator (|pos.p| or |err|) is past the end
of the chunk, we shouldn't access it.

This bug has been detected by KMSAN. For the following pair of system
calls:

  socket(PF_INET6, SOCK_STREAM, 0x84 /* IPPROTO_??? */) = 3
  sendto(3, "A", 1, MSG_OOB, {sa_family=AF_INET6, sin6_port=htons(0),
         inet_pton(AF_INET6, "::1", &sin6_addr), sin6_flowinfo=0,
         sin6_scope_id=0}, 28) = 1

the tool has reported a use of uninitialized memory:

  ==================================================================
  BUG: KMSAN: use of uninitialized memory in sctp_rcv+0x17b8/0x43b0
  CPU: 1 PID: 2940 Comm: probe Not tainted 4.11.0-rc5+ #2926
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
  01/01/2011
  Call Trace:
   <IRQ>
   __dump_stack lib/dump_stack.c:16
   dump_stack+0x172/0x1c0 lib/dump_stack.c:52
   kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927
   __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469
   __sctp_rcv_init_lookup net/sctp/input.c:1074
   __sctp_rcv_lookup_harder net/sctp/input.c:1233
   __sctp_rcv_lookup net/sctp/input.c:1255
   sctp_rcv+0x17b8/0x43b0 net/sctp/input.c:170
   sctp6_rcv+0x32/0x70 net/sctp/ipv6.c:984
   ip6_input_finish+0x82f/0x1ee0 net/ipv6/ip6_input.c:279
   NF_HOOK ./include/linux/netfilter.h:257
   ip6_input+0x239/0x290 net/ipv6/ip6_input.c:322
   dst_input ./include/net/dst.h:492
   ip6_rcv_finish net/ipv6/ip6_input.c:69
   NF_HOOK ./include/linux/netfilter.h:257
   ipv6_rcv+0x1dbd/0x22e0 net/ipv6/ip6_input.c:203
   __netif_receive_skb_core+0x2f6f/0x3a20 net/core/dev.c:4208
   __netif_receive_skb net/core/dev.c:4246
   process_backlog+0x667/0xba0 net/core/dev.c:4866
   napi_poll net/core/dev.c:5268
   net_rx_action+0xc95/0x1590 net/core/dev.c:5333
   __do_softirq+0x485/0x942 kernel/softirq.c:284
   do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
   </IRQ>
   do_softirq kernel/softirq.c:328
   __local_bh_enable_ip+0x25b/0x290 kernel/softirq.c:181
   local_bh_enable+0x37/0x40 ./include/linux/bottom_half.h:31
   rcu_read_unlock_bh ./include/linux/rcupdate.h:931
   ip6_finish_output2+0x19b2/0x1cf0 net/ipv6/ip6_output.c:124
   ip6_finish_output+0x764/0x970 net/ipv6/ip6_output.c:149
   NF_HOOK_COND ./include/linux/netfilter.h:246
   ip6_output+0x456/0x520 net/ipv6/ip6_output.c:163
   dst_output ./include/net/dst.h:486
   NF_HOOK ./include/linux/netfilter.h:257
   ip6_xmit+0x1841/0x1c00 net/ipv6/ip6_output.c:261
   sctp_v6_xmit+0x3b7/0x470 net/sctp/ipv6.c:225
   sctp_packet_transmit+0x38cb/0x3a20 net/sctp/output.c:632
   sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885
   sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750
   sctp_side_effects net/sctp/sm_sideeffect.c:1773
   sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147
   sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88
   sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954
   inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
   sock_sendmsg_nosec net/socket.c:633
   sock_sendmsg net/socket.c:643
   SYSC_sendto+0x608/0x710 net/socket.c:1696
   SyS_sendto+0x8a/0xb0 net/socket.c:1664
   do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285
   entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:246
  RIP: 0033:0x401133
  RSP: 002b:00007fff6d99cd38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
  RAX: ffffffffffffffda RBX: 00000000004002b0 RCX: 0000000000401133
  RDX: 0000000000000001 RSI: 0000000000494088 RDI: 0000000000000003
  RBP: 00007fff6d99cd90 R08: 00007fff6d99cd50 R09: 000000000000001c
  R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
  R13: 00000000004063d0 R14: 0000000000406460 R15: 0000000000000000
  origin:
   save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
   kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302
   kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198
   kmsan_poison_shadow+0x6d/0xc0 mm/kmsan/kmsan.c:211
   slab_alloc_node mm/slub.c:2743
   __kmalloc_node_track_caller+0x200/0x360 mm/slub.c:4351
   __kmalloc_reserve net/core/skbuff.c:138
   __alloc_skb+0x26b/0x840 net/core/skbuff.c:231
   alloc_skb ./include/linux/skbuff.h:933
   sctp_packet_transmit+0x31e/0x3a20 net/sctp/output.c:570
   sctp_outq_flush+0xeb3/0x46e0 net/sctp/outqueue.c:885
   sctp_outq_uncork+0xb2/0xd0 net/sctp/outqueue.c:750
   sctp_side_effects net/sctp/sm_sideeffect.c:1773
   sctp_do_sm+0x6962/0x6ec0 net/sctp/sm_sideeffect.c:1147
   sctp_primitive_ASSOCIATE+0x12c/0x160 net/sctp/primitive.c:88
   sctp_sendmsg+0x43e5/0x4f90 net/sctp/socket.c:1954
   inet_sendmsg+0x498/0x670 net/ipv4/af_inet.c:762
   sock_sendmsg_nosec net/socket.c:633
   sock_sendmsg net/socket.c:643
   SYSC_sendto+0x608/0x710 net/socket.c:1696
   SyS_sendto+0x8a/0xb0 net/socket.c:1664
   do_syscall_64+0xe6/0x130 arch/x86/entry/common.c:285
   return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:246
  ==================================================================
Signed-off-by: NAlexander Potapenko <glider@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_paramhdr_t, and replace
with struct sctp_paramhdr in the places where it's using this
typedef.

It is also to fix some indents and  use sizeof(variable) instead
of sizeof(type).
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_chunkhdr_t, and replace
with struct sctp_chunkhdr in the places where it's using this
typedef.

It is also to fix some indents and use sizeof(variable) instead
of sizeof(type)., especially in sctp_new.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is almost to revert commit 02f3d4ce ("sctp: Adjust PMTU
updates to accomodate route invalidation."). As t->asoc can't be NULL
in sctp_transport_update_pmtu, it could get sk from asoc, and no need
to pass sk into that function.

It is also to remove some duplicated codes from that function.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to move sctp_transport_dst_check into sctp_packet_config
from sctp_packet_transmit and add pathmtu check in sctp_packet_config.

With this fix, sctp can update dst or pathmtu before appending chunks,
which can void dropping packets in sctp_packet_transmit when dst is
obsolete or dst's mtu is changed.

This patch is also to improve some other codes in sctp_packet_config.
It updates packet max_size with gso_max_size, checks for dst and
pathmtu, and appends ecne chunk only when packet is empty and asoc
is not NULL.

It makes sctp flush work better, as we only need to set up them once
for one flush schedule. It's also safe, since asoc is NULL only when
the packet is created by sctp_ootb_pkt_new in which it just gets the
new dst, no need to do more things for it other than set packet with
transport's pathmtu.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now when sending a packet, sctp_transport_dst_check will check if dst
is obsolete by calling ipv4/ip6_dst_check. But they return obsolete
only when adding a new cache, after that when the cache's pmtu is
updated again, it will not trigger transport->dst/pmtu's update.

It can be reproduced by reducing route's pmtu twice. At the 1st time
client will add a new cache, and transport->pathmtu gets updated as
sctp_transport_dst_check finds it's obsolete. But at the 2nd time,
cache's mtu is updated, sctp client will never send out any packet,
because transport->pmtu has no chance to update.

This patch is to fix this by also checking if transport pmtu is dst
mtu in sctp_transport_dst_check, so that transport->pmtu can be
updated on time.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to implement Sender-Side Procedures for the Add
Outgoing and Incoming Streams Request Parameter described in
rfc6525 section 5.1.5-5.1.6.

It is also to add sockopt SCTP_ADD_STREAMS in rfc6525 section
6.3.4 for users.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to implement Sender-Side Procedures for the SSN/TSN
Reset Request Parameter descibed in rfc6525 section 5.1.4.

It is also to add sockopt SCTP_RESET_ASSOC in rfc6525 section 6.3.3
for users.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new transport flag to allow sockets to confirm neighbour.
When same struct dst_entry can be used for many different
neighbours we can not use it for pending confirmations.
The flag is propagated from transport to every packet.
It is reset when cached dst is reset.
Reported-by: NYueHaibing <yuehaibing@huawei.com>
Fixes: 5110effe ("net: Do delayed neigh confirmation.")
Fixes: f2bb4bed ("ipv4: Cache output routes in fib_info nexthops.")
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to implement sender-side procedures for the Outgoing
and Incoming SSN Reset Request Parameter described in rfc6525 section
5.1.2 and 5.1.3.

It is also add sockopt SCTP_RESET_STREAMS in rfc6525 section 6.3.2
for users.

Note that the new asoc member strreset_outstanding is to make sure
only one reconf request chunk on the fly as rfc6525 section 5.1.1
demands.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to add a primitive based on sctp primitive frame for
sending stream reconf request. It works as the other primitives,
and create a SCTP_CMD_REPLY command to send the request chunk out.

sctp_primitive_RECONF would be the api to send a reconf request
chunk.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp stream reconf, described in RFC 6525, needs a structure to
save per stream information in assoc, like stream state.

In the future, sctp stream scheduler also needs it to save some
stream scheduler params and queues.

This patchset is to prepare the stream array in assoc for stream
reconf. It defines sctp_stream that includes stream arrays inside
to replace ssnmap.

Note that we use different structures for IN and OUT streams, as
the members in per OUT stream will get more and more different
from per IN stream.

v1->v2:
  - put these patches into a smaller group.
v2->v3:
  - define sctp_stream to contain stream arrays, and create stream.c
    to put stream-related functions.
  - merge 3 patches into 1, as new sctp_stream has the same name
    with before.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now sctp transport rhashtable uses hash(lport, dport, daddr) as the key
to hash a node to one chain. If in one host thousands of assocs connect
to one server with the same lport and different laddrs (although it's
not a normal case), all the transports would be hashed into the same
chain.

It may cause to keep returning -EBUSY when inserting a new node, as the
chain is too long and sctp inserts a transport node in a loop, which
could even lead to system hangs there.

The new rhlist interface works for this case that there are many nodes
with the same key in one chain. It puts them into a list then makes this
list be as a node of the chain.

This patch is to replace rhashtable_ interface with rhltable_ interface.
Since a chain would not be too long and it would not return -EBUSY with
this fix when inserting a node, the reinsert loop is also removed here.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prior to this patch, in rx path, before calling lock_sock, it needed to
hold assoc when got it by __sctp_lookup_association, in case other place
would free/put assoc.

But in __sctp_lookup_association, it lookup and hold transport, then got
assoc by transport->assoc, then hold assoc and put transport. It means
it didn't hold transport, yet it was returned and later on directly
assigned to chunk->transport.

Without the protection of sock lock, the transport may be freed/put by
other places, which would cause a use-after-free issue.

This patch is to fix this issue by holding transport instead of assoc.
As holding transport can make sure to access assoc is also safe, and
actually it looks up assoc by searching transport rhashtable, to hold
transport here makes more sense.

Note that the function will be renamed later on on another patch.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To something more meaningful these days, specially because this is
working on packet headers or lengths and which are not tied to any CPU
arch but to the protocol itself.

So, WORD_TRUNC becomes SCTP_TRUNC4 and WORD_ROUND becomes SCTP_PAD4.
Reported-by: NDavid Laight <David.Laight@ACULAB.COM>
Reported-by: NDavid Miller <davem@davemloft.net>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SCTP has this pecualiarity that its packets cannot be just segmented to
(P)MTU. Its chunks must be contained in IP segments, padding respected.
So we can't just generate a big skb, set gso_size to the fragmentation
point and deliver it to IP layer.

This patch takes a different approach. SCTP will now build a skb as it
would be if it was received using GRO. That is, there will be a cover
skb with protocol headers and children ones containing the actual
segments, already segmented to a way that respects SCTP RFCs.

With that, we can tell skb_segment() to just split based on frag_list,
trusting its sizes are already in accordance.

This way SCTP can benefit from GSO and instead of passing several
packets through the stack, it can pass a single large packet.

v2:
- Added support for receiving GSO frames, as requested by Dave Miller.
- Clear skb->cb if packet is GSO (otherwise it's not used by SCTP)
- Added heuristics similar to what we have in TCP for not generating
  single GSO packets that fills cwnd.
v3:
- consider sctphdr size in skb_gso_transport_seglen()
- rebased due to 5c7cdf33 ("gso: Remove arbitrary checks for
  unsupported GSO")
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is nothing related to BH in SNMP counters anymore,
since linux-3.0.

Rename helpers to use __ prefix instead of _BH prefix,
for contexts where preemption is disabled.

This more closely matches convention used to update
percpu variables.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename SCTP_INC_STATS_BH() to __SCTP_INC_STATS()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the old days (before linux-3.0), SNMP counters were duplicated,
one for user context, and one for BH context.

After commit 8f0ea0fe ("snmp: reduce percpu needs by 50%")
we have a single copy, and what really matters is preemption being
enabled or disabled, since we use this_cpu_inc() or __this_cpu_inc()
respectively.

We therefore kill SNMP_INC_STATS_USER(), SNMP_ADD_STATS_USER(),
NET_INC_STATS_USER(), NET_ADD_STATS_USER(), SCTP_INC_STATS_USER(),
SNMP_INC_STATS64_USER(), SNMP_ADD_STATS64_USER(), TCP_ADD_STATS_USER(),
UDP_INC_STATS_USER(), UDP6_INC_STATS_USER(), and XFRM_INC_STATS_USER()

Following patches will rename __BH helpers to make clear their
usage is not tied to BH being disabled.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For some main variables in sctp.ko, we couldn't export it to other modules,
so we have to define some api to access them.

It will include sctp transport and endpoint's traversal.

There are some transport traversal functions for sctp_diag, we can also
use it for sctp_proc. cause they have the similar situation to traversal
transport.

v2->v3:
- rhashtable_walk_init need the parameter gfp, because of recent upstrem
  update
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>