With arm:allmodconfig, building the Teles PCI driver fails with

telespci.c:294:2: error: #error "not running on big endian machines now"

Similar, building the driver for HFC PCI-Bus cards fails with

hfc_pci.c:1647:2: error: #error "not running on big endian machines now"

Remove the big endian cpp check from both drivers to fix the build errors.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

Pls apply the following bug fixes to the 'net' tree. Thanks.

Suresh Reddy (2):
  be2net: increase the timeout value for loopback-test FW cmd
  be2net: fix max_evt_qs calculation for BE3 in SR-IOV config

Vasundhara Volam (1):
  be2net: disable RSS when number of RXQs is reduced to 1 via
    set-channels
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF.
When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs.
Signed-off-by: NSuresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The loopback test FW cmd may need upto 15 seconds to complete on
certain PHYs. This patch also fixes the name of the completion variable
used to synchronize FW cmd completions as it not used by the flashing
cmd alone anymore.
Signed-off-by: NSuresh Reddy <suresh.reddy@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When *only* the default RXQ is used, the RSS policy must be disabled so
that all IP and no-IP traffic is placed into the default RXQ. If not,
IP traffic is dropped.

Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for
the interface.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit ac3d5ac2 ("xen-netback: fix guest-receive-side array sizes")
added calls to vmalloc and vfree in the interface.c file without including
<linux/vmalloc.h>.  This causes build failures if the
-Werror=implicit-function-declaration flag is passed.
Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function lowpan_header_create(), we invoke the following code
construct:

  struct ipv6hdr *hdr;
  ...
  hdr = ipv6_hdr(skb);
  ...
  if (...)
    memcpy(hc06_ptr + 1, &hdr->flow_lbl[1], 2);
  else
    memcpy(hc06_ptr, &hdr, 4);

Where the else path of the condition, that is, non-compression
path, calls memcpy() with a pointer to struct ipv6hdr *hdr as
source, thus two levels of indirection. This cannot be correct,
and likely only one level of pointer was intended as source
buffer for memcpy() here.

Fixes: 44331fe2 ("IEEE802.15.4: 6LoWPAN basic support")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Werner Almesberger <werner@almesberger.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to keep DT compatibility we need to revert this, otherwise the original
dts files will no longer work with this driver change.

This reverts commit 7a399e3a.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
bnx2x: Bug fixes patch series

Most of what this parch series contains is SR-IOV related bug fixes.
Additionally, it contains some small fixes for legacy devices/modes.

Please consider applying these patches to `net'.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the hypervisor configures a vlan for the VF via the PF, the expected
result is that only packets tagged by said vlan will be received by the VF
(and that vlan will be silently removed).
Due to an incorrect manipulation of vlan filters in the driver, the
VF can receive untagged traffic even if the hypervisor configured
some vlan for it.

This patch corrects the behaviour.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are 2 different (related) flows in the slowpath configuration
that utilize the same pointer and cast it to different structs;
This is obviously incorrect as the intended allocated memory is that
of the smaller struct, possibly causing the flow utilizing the larger
struct to corrupt other slowpath configuration.

Since both flows are exclusive, set the allocated memory to be a union
of both structs.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a PF receives a VF message indicating a change in RSS properties
it should clean the flags' bit-fields; Otherwise, it's possible that
some random values will be considered as flags by the lower layers configuring
the RSS in FW.
Signed-off-by: NMichal Kalderon <michals@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Number of VFs in PCIe configuration space is zero-based. Driver incorrectly
sets the number of VFs to be larger by one than what actually is feasible by
HW, which might cause later VFs to fail to allocate their MSI-X interrupts.
Signed-off-by: NMichal Kalderon <michals@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Original straightforward division may lead to zeroing number of SB and
null-pointer dereference when device is short of MSIX vectors or lacks
MSIX capabilities.
Reported-by: NVladislav Zolotarov <vladz@cloudius-systems.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Driver is using common tx_clean_lock for all Tx queues. This patch
  adds per queue tx_clean_lock.
o Driver is not updating sw_consumer while processing Tx completion
  when interface is going down. Fixed in this patch.
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we create a new infiniband link with uninfiniband device, e.g. `ip link
add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference
cause other dev like Ethernet don't have struct ib_device.

The code path is:
rtnl_newlink
  |-- ipoib_new_child_link
        |-- __ipoib_vlan_add
              |-- ipoib_set_dev_features
                    |-- ib_query_device

Fix this bug by make sure the src net is infiniband when create new link.
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even if user doesn't supply the physical netdev to attach vxlan dev
to, and at the same time user want to vxlan sit top of IPv6, mark
vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket.
Otherwise kernel crashes safely every time spitting below messages,

Steps to reproduce:
ip link add vxlan0 type vxlan id 42 group ff0e::110
ip link set vxlan0 up

[   62.656266] BUG: unable to handle kernel NULL pointer dereference[   62.656320] ip (3008) used greatest stack depth: 3912 bytes left
 at 0000000000000046
[   62.656423] IP: [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0
[   62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0
[   62.656674] Oops: 0000 [#1] SMP
[   62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key
[   62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182
[   62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[   62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000
[   62.657083] RIP: 0010:[<ffffffff816d822d>]  [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0
[   62.657083] RSP: 0000:ffff88002fd038f8  EFLAGS: 00210296
[   62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000
[   62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278
[   62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000
[   62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001
[   62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001
[   62.657083] FS:  0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740
[   62.657083] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[   62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0
[   62.657083] Stack:
[   62.657083]  ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480
[   62.657083]  ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00
[   62.657083]  ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001
[   62.657083] Call Trace:
[   62.657083]  <IRQ>
[   62.657083]  [<ffffffff816cac8b>] ip6_dst_lookup_tail+0xdb/0xf0
[   62.657083]  [<ffffffff816caea0>] ip6_dst_lookup+0x10/0x20
[   62.657083]  [<ffffffffa0020c13>] vxlan_xmit_one+0x193/0x9c0 [vxlan]
[   62.657083]  [<ffffffff8137b3b7>] ? account+0xc7/0x1f0
[   62.657083]  [<ffffffffa0021513>] vxlan_xmit+0xd3/0x400 [vxlan]
[   62.657083]  [<ffffffff8161390d>] dev_hard_start_xmit+0x49d/0x5e0
[   62.657083]  [<ffffffff81613d29>] dev_queue_xmit+0x2d9/0x480
[   62.657083]  [<ffffffff817cb854>] ? _raw_write_unlock_bh+0x14/0x20
[   62.657083]  [<ffffffff81630565>] ? eth_header+0x35/0xe0
[   62.657083]  [<ffffffff8161bc5e>] neigh_resolve_output+0x11e/0x1e0
[   62.657083]  [<ffffffff816ce0e0>] ? ip6_fragment+0xad0/0xad0
[   62.657083]  [<ffffffff816cb465>] ip6_finish_output2+0x2f5/0x470
[   62.657083]  [<ffffffff816ce166>] ip6_finish_output+0x86/0xc0
[   62.657083]  [<ffffffff816ce218>] ip6_output+0x78/0xb0
[   62.657083]  [<ffffffff816eadd6>] mld_sendpack+0x256/0x2a0
[   62.657083]  [<ffffffff816ebd8c>] mld_ifc_timer_expire+0x17c/0x290
[   62.657083]  [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80
[   62.657083]  [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80
[   62.657083]  [<ffffffff81051065>] call_timer_fn+0x45/0x150
[   62.657083]  [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80
[   62.657083]  [<ffffffff81052353>] run_timer_softirq+0x1f3/0x2a0
[   62.657083]  [<ffffffff8102dfd8>] ? lapic_next_event+0x18/0x20
[   62.657083]  [<ffffffff8109e36f>] ? clockevents_program_event+0x6f/0x110
[   62.657083]  [<ffffffff8104a2f6>] __do_softirq+0xd6/0x2b0
[   62.657083]  [<ffffffff8104a75e>] irq_exit+0x7e/0xa0
[   62.657083]  [<ffffffff8102ea15>] smp_apic_timer_interrupt+0x45/0x60
[   62.657083]  [<ffffffff817d3eca>] apic_timer_interrupt+0x6a/0x70
[   62.657083]  <EOI>
[   62.657083]  [<ffffffff817d4a35>] ? sysenter_dispatch+0x7/0x1a
[   62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff
[   62.657083] RIP  [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0
[   62.657083]  RSP <ffff88002fd038f8>
[   62.657083] CR2: 0000000000000046
[   62.657083] ---[ end trace ba8a9583d7cd1934 ]---
[   62.657083] Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: NFan Du <fan.du@windriver.com>
Reported-by: NRyan Whelan <rcwhelan@gmail.com>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 52367a76
("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"),
we have failures like this during cxgb4 probe:

cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536]
cxgb4: probe of 0000:01:00.4 failed with error -22

This happens whenever software parameters are used, without a
configuration file. That happens when the hardware was already
initialized (after kexec, or after csiostor is loaded).

It happens that these values are acceptable, rendering fl_pg_order equal
to 0, which is the case of a hard init when the page size is equal or
larger than 65536.

Accepting fl_large_pg equal to fl_small_pg solves the issue, and
shouldn't cause any trouble besides a possible performance reduction
when smaller pages are used. And that can be fixed by a configuration
file.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The VLAN tag handling code in netpoll_send_skb_on_dev() has two problems.

1) It exits without unlocking the TXQ.

2) It then tries to queue a NULL skb to npinfo->txq.
Reported-by: NAhmed Tamrawi <atamrawi@iastate.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when read/write the 64bit data, the correct lock should be hold.
and we can use the generic vti6_get_stats to return stats, and
not define a new one in ip6_vti.c

Fixes: 87b6d218 ("tunnel: implement 64 bits statistics")
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when read/write the 64bit data, the correct lock should be hold.

Fixes: 87b6d218 ("tunnel: implement 64 bits statistics")

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed a problem with setting the lifetime of an IPv6
address. When setting preferred_lft to a value not zero or
infinity, while valid_lft is infinity(0xffffffff) preferred
lifetime is set to forever and does not update. Therefore
preferred lifetime never becomes deprecated. valid lifetime
and preferred lifetime should be set independently, even if
valid lifetime is infinity, preferred lifetime must expire
correctly (meaning it must eventually become deprecated)
Signed-off-by: NYasushi Asano <yasushi.asano@jp.fujitsu.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While commit 30a584d9 fixes datagram interface in LLC, a use
after free bug has been introduced for SOCK_STREAM sockets that do
not make use of MSG_PEEK.

The flow is as follow ...

  if (!(flags & MSG_PEEK)) {
    ...
    sk_eat_skb(sk, skb, false);
    ...
  }
  ...
  if (used + offset < skb->len)
    continue;

... where sk_eat_skb() calls __kfree_skb(). Therefore, cache
original length and work on skb_len to check partial reads.

Fixes: 30a584d9 ("[LLX]: SOCK_DGRAM interface fixes")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During restoring, try_fill_recv() was called with neither napi lock nor napi
disabled. This can lead two try_fill_recv() was called in the same time. Fix
this by refilling before trying to enable napi.

Fixes 0741bcb5
(virtio: net: Add freeze, restore handlers to support S4).

Cc: Amit Shah <amit.shah@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VM to VM GSO traffic is broken if it goes through VXLAN or GRE
tunnel and the physical NIC on the host supports hardware VXLAN/GRE
GSO offload (e.g. bnx2x and next-gen mlx4).

Two issues -
(VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with
SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header
integrity check fails in udp4_ufo_fragment if inner protocol is
TCP. Also gso_segs is calculated incorrectly using skb->len that
includes tunnel header. Fix: robust check should only be applied
to the inner packet.

(VXLAN & GRE) Once GSO header integrity check passes, NULL segs
is returned and the original skb is sent to hardware. However the
tunnel header is already pulled. Fix: tunnel header needs to be
restored so that hardware can perform GSO properly on the original
packet.
Signed-off-by: NWei-Chun Chao <weichunc@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SCTP outqueue structure maintains a data chunks
that are pending transmission, the list of chunks that
are pending a retransmission and a length of data in
flight.  It also tries to keep the emtpy state so that
it can performe shutdown sequence or notify user.

The problem is that the empy state is inconsistently
tracked.  It is possible to completely drain the queue
without sending anything when using PR-SCTP.  In this
case, the empty state will not be correctly state as
report by Jamal Hadi Salim <jhs@mojatatu.com>.  This
can cause an association to be perminantly stuck in the
SHUTDOWN_PENDING state.

Additionally, SCTP is incredibly inefficient when setting
the empty state.  Even though all the data is availaible
in the outqueue structure, we ignore it and walk a list
of trasnports.

In the end, we can completely remove the extra empty
state and figure out if the queue is empty by looking
at 3 things:  length of pending data, length of in-flight
data, and exisiting of retransmit data.  All of these
are already in the strucutre.
Reported-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NVlad Yasevich <vyasevich@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Tested-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o TX queues allocation was getting distributed equally among all the
  functions of the port including VFs and PF. Which was leading to failure
  in PF's multiple TX queues creation.

o Instead of dividing queues equally allocate one TX queue for each VF as VF
  doesn't support multiple TX queues.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Adapter requires that if the port is in loopback mode no traffic should
  be flowing through that port, so on arrival of Link up AEN, do not advertise
  Link up to the stack until port is out of loopback mode
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when read/write the 64bit data, the correct lock should be hold.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function llc_conn_ac_inc_vr_by_1() evaluates via macro
PDU_GET_NEXT_Vr() into ...

  llc_sk(sk)->vR = ++llc_sk(sk)->vR & 0xffffffffffffff7f

... but the order in which the side effects take place is
undefined because there is no intervening sequence point.

As llc_sk(sk)->vR is written in llc_sk(sk)->vR (assignment
left-hand side) and written in ++llc_sk(sk)->vR & 0xffffffffffffff7f
this might possibly yield undefined behavior.

The final value of llc_sk(sk)->vR is ambiguous, because,
depending on the order of expression evaluation, the
increment may occur before, after, or interleaved with
the assignment. In C, evaluating such an expression yields
undefined behavior.

Since we're doing the increment via PDU_GET_NEXT_Vr() macro
and the only place it is being used is from
llc_conn_ac_inc_vr_by_1(), in order to increment vR by 1
with a follow-up optimized modulo, rewrite the expression
into ((vR + 1) & CONST) in order to fix this.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

KR2 work-around is based on detecting non-KR2 devices which may not link up
in this mode. One such link-partner is the BCM8073 which has specific
advertisement characteristics in specific mode, and this condition was not set
correctly.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a problem where link is reported to be up when SFP+ module is plugged in
without cable. This occurs with specific module types which may generate
temporary TX_FAULT indication. Solution is to avoid changing any link parameters
when checking TX_FAULT indication while physical link is down.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BCM54618SE is used to advertise half-duplex even if HD was not requested by the
user. This change makes the legacy speed/duplex advertisement for this PHY
exactly according to the requested speed and duplex.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix Passive DAC detection for specific cables, such that even in case
SFP_CABLE_TECHNOLOGY option is not set in the EEPROM (offset 8), treat it as a
passive DAC cable, since some cables don't have this indication.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a problem where 578xx-KR is unable to get link when connected to 1G link
partner. Two fixes were required:
One was to force CL37 sync_status low to prevent Warpcore from getting stuck in
CL73 parallel detect loop while link partner is sending.
Second fix was to enable auto-detect mode, thus allowing the Warpcore to select
the higher speed protocol between 10G-KR (over CL73), or go down to 1G over CL73
when there's indication for it.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even with the quirks in commit dabdaf0c (mcs7830: Fix link state
detection) there are still spurious link-down events for some chips
where the false link-down events count go over a few hundreds.

This patch takes a more conservative approach and only looks at
link-down events where the link-down state is not combined with other
states (e.g. half/full speed, pending frames in SRAM or TX status
information valid). In all other cases we assume the link is up.

Tested on MCS7830CV-DA (USB ID 9710:7830).

Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Michael Leun <lkml20120218@newton.leun.net>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the vlan code detects that the real device can do TX VLAN offloads
in hardware, it tries to arrange for the real device's header_ops to
be invoked directly.

But it does so illegally, by simply hooking the real device's
header_ops up to the VLAN device.

This doesn't work because we will end up invoking a set of header_ops
routines which expect a device type which matches the real device, but
will see a VLAN device instead.

Fix this by providing a pass-thru set of header_ops which will arrange
to pass the proper real device instead.

To facilitate this add a dev_rebuild_header().  There are
implementations which provide a ->cache and ->create but not a
->rebuild (f.e. PLIP).  So we need a helper function just like
dev_hard_header() to avoid crashes.

Use this helper in the one existing place where the
header_ops->rebuild was being invoked, the neighbour code.

With lots of help from Florian Westphal.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull devicetree fixes from Rob Herring:
 - Fix 2 regressions found on PPC
 - Allow NULL ptr in unflatten_and_copy_device_tree
 - Update my email address

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: Update Rob Herring's email address
  of/irq: Fix device_node refcount in of_irq_parse_raw()
  of/Kconfig: Spelling s/one/once/
  Revert "of/address: Handle #address-cells > 2 specially"
  of: Fix NULL dereference in unflatten_and_copy()

Pull powerpc fixes from Ben Herrenschmidt:
 "A bit more endian problems found during testing of 3.13 and a few
  other simple fixes and regressions fixes"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix alignment of secondary cpu spin vars
  powerpc: Align p_end
  powernv/eeh: Add buffer for P7IOC hub error data
  powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
  powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
  powerpc: Make unaligned accesses endian-safe for powerpc
  powerpc: Fix bad stack check in exception entry
  powerpc/512x: dts: disable MPC5125 usb module
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)