Clamp the layout barrier sequence id to the current sequence id
minus the maximum number of outstanding layoutget requests.

Also ensure that we correctly initialise lo->plh_barrier if there are
no layout segments associated to this layout header.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

nfs4_open_recover_helper zeros the nfs4_opendata result structures, removing
the result access_request information which leads to an XDR decode error.

Move the setting of the result access_request field to nfs4_init_opendata_res
which sets all the other required nfs4_opendata result fields and is shared
between the open and recover open paths.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

CONFIG_EXPERIMENTAL is deprecated and, regardless of that, this code
is being enabled in most newer distributions.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We currently make no distinction in attribute requests between normal OPENs
and OPEN with CLAIM_PREVIOUS.  This offers more possibility of failures in
the GETATTR response which foils OPEN reclaim attempts.

Reduce the requested attributes to the bare minimum needed to update the
reclaim open stateid and split nfs4_opendata_to_nfs4_state processing
accordingly.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...before it can check the validity of that file type.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and fix a bug in pnfs_set_layout_stateid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and add a helper function.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the list of layout segments is empty, we must unconditionally set
the layout stateid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't put an ACCESS op in OPEN compound if O_EXCL, because ACCESS
will return permission denied for all bits until close.

Fixes a regression due to commit 6168f62c (NFSv4: Add ACCESS operation to
OPEN compound)
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't check MAY_WRITE as a newly created file may not have write mode bits,
but POSIX allows the creating process to write regardless.
This is ok because NFSv4 OPEN ops handle write permissions correctly -
the ACCESS in the OPEN compound is to differentiate READ v EXEC permissions.

Fixes a regression due to commit 6168f62c (NFSv4: Add ACCESS operation to
OPEN compound)
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This prevents a null pointer dereference when
nfs_idmap_complete_pipe_upcall_locked() calls complete_request_key().

Fixes a regression caused by commit 0cac1202 (NFSv4: Ensure that
idmap_pipe_downcall sanity-checks the downcall data).
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since the addition of NFSv4 server trunking detection the mount context
calls nfs4_proc_exchange_id then schedules the state manager, which also
calls nfs4_proc_exchange_id. Setting the NFS4CLNT_LEASE_CONFIRM bit
makes the state manager skip the unneeded EXCHANGE_ID and continue on
with session creation.
Reported-by: NJorge Mora <mora@netapp.com>
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sparse identified an execution path in nfs41_walk_client_list()
where the nfs_client_lock is not re-acquired before taking the next
loop iteration.

fs/nfs/nfs4client.c:437:9: sparse: context imbalance in
 'nfs41_walk_client_list' - different lock contexts for basic block
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the layoutget call returns a stateid error, we want to invalidate the
layout stateid, and/or recover the open stateid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sparse warning:
fs/nfs/nfs4getroot.c:11:5: warning: symbol 'nfs4_get_rootfh' was not declared.
Should it be static?
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sparse warnings:
fs/nfs/nfs4sysctl.c:56:5: warning: symbol 'nfs4_register_sysctl' was not
declared. Should it be static?
fs/nfs/nfs4sysctl.c:64:6: warning: symbol 'nfs4_unregister_sysctl' was not
declared. Should it be static?
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sparse warning:
fs/nfs/super.c:2517:15: warning: symbol 'nfs_xdev_mount' was not declared.
Should it be static?
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Sparse warning:
fs/nfs/super.c:2638:16: sparse: symbol 'nfs_callback_tcpport' was not
declared. Should it be static?
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Build error:
fs/nfs/netns.h:27:15: error: 'NFS4_MAX_MINOR_VERSION' undeclared here (not in
a function)
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We should reclaim reboot state when the clientid is stale.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix another compiler warning.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The current spaghetti code confuses some versions of gcc (and just
looks ugly as hell)! Clean up...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

nfs_callback_tcpport is now per-net_namespace.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

[nfs] replace strict_str* with kstr* variants

 * replace string conversions with newer kstr* functions
Signed-off-by: NDaniel Walter <sahne@0x90.at>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There are some unnecessary semicolons in function find_nfs_version. Just remove them.
Signed-off-by: NYanchuan Nian <ycnian@gmail.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For DIO writes, if it is not blocksize aligned, we need to do
internal serialization. It may slow down writers anyway. So we
just bail them out and resend to MDS.

Cc: stable <stable@vger.kernel.org> [since v3.4]
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For DIO read, if it is not sector aligned, we should reject it
and resend via MDS. Otherwise there might be data corruption.
Also teach bl_read_pagelist to handle partial page reads for DIO.

Cc: stable <stable@vger.kernel.org> [since v3.4]
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If applications use flock to protect its write range, generic NFS
will not do read-modify-write cycle at page cache level. Therefore
LD should know how to handle non-sector aligned writes. Otherwise
there will be data corruption.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This reverts commit 159e0561, in favor
of a more complete fix to the alignment issue.
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

After commit e38eb650 (NFS: set_pnfs_layoutdriver() from
nfs4_proc_fsinfo()), set_pnfs_layoutdriver() is called inside
nfs4_proc_fsinfo(), but pnfs_blksize is not set. It causes setting
blocklayoutdriver failure and pnfsblock mount failure.

Cc: stable <stable@vger.kernel.org> [since v3.5]
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

pnfs_within_mdsthreshold() is called inside pg_init. We need to set
read_io/write_io before that. Otherwise we fail pnfs_within_mdsthreshold()
and IO goes to MDS.
A simple test case:
dd if=foo of=/mnt/pnfs/bar bs=10M count=1 oflag=direct
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

An optional boot parameter is introduced to allow client
administrators to specify a string that the Linux NFS client can
insert into its nfs_client_id4 id string, to make it both more
globally unique, and to ensure that it doesn't change even if the
client's nodename changes.

If this boot parameter is not specified, the client's nodename is
used, as before.

Client installation procedures can create a unique string (typically,
a UUID) which remains unchanged during the lifetime of that client
instance.  This works just like creating a UUID for the label of the
system's root and boot volumes.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

"Server trunking" is a fancy named for a multi-homed NFS server.
Trunking might occur if a client sends NFS requests for a single
workload to multiple network interfaces on the same server.  There
are some implications for NFSv4 state management that make it useful
for a client to know if a single NFSv4 server instance is
multi-homed.  (Note this is only a consideration for NFSv4, not for
legacy versions of NFS, which are stateless).

If a client cares about server trunking, no NFSv4 operations can
proceed until that client determines who it is talking to.  Thus
server IP trunking discovery must be done when the client first
encounters an unfamiliar server IP address.

The nfs_get_client() function walks the nfs_client_list and matches
on server IP address.  The outcome of that walk tells us immediately
if we have an unfamiliar server IP address.  It invokes
nfs_init_client() in this case.  Thus, nfs4_init_client() is a good
spot to perform trunking discovery.

Discovery requires a client to establish a fresh client ID, so our
client will now send SETCLIENTID or EXCHANGE_ID as the first NFS
operation after a successful ping, rather than waiting for an
application to perform an operation that requires NFSv4 state.

The exact process for detecting trunking is different for NFSv4.0 and
NFSv4.1, so a minorversion-specific init_client callout method is
introduced.

CLID_INUSE recovery is important for the trunking discovery process.
CLID_INUSE is a sign the server recognizes the client's nfs_client_id4
id string, but the client is using the wrong principal this time for
the SETCLIENTID operation.  The SETCLIENTID must be retried with a
series of different principals until one works, and then the rest of
trunking discovery can proceed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, when identifying itself to NFS servers, the Linux NFS
client uses a unique nfs_client_id4.id string for each server IP
address it talks with.  For example, when client A talks to server X,
the client identifies itself using a string like "AX".  The
requirements for these strings are specified in detail by RFC 3530
(and bis).

This form of client identification presents a problem for Transparent
State Migration.  When client A's state on server X is migrated to
server Y, it continues to be associated with string "AX."  But,
according to the rules of client string construction above, client
A will present string "AY" when communicating with server Y.

Server Y thus has no way to know that client A should be associated
with the state migrated from server X.  "AX" is all but abandoned,
interfering with establishing fresh state for client A on server Y.

To support transparent state migration, then, NFSv4.0 clients must
instead use the same nfs_client_id4.id string to identify themselves
to every NFS server; something like "A".

Now a client identifies itself as "A" to server X.  When a file
system on server X transitions to server Y, and client A identifies
itself as "A" to server Y, Y will know immediately that the state
associated with "A," whether it is native or migrated, is owned by
the client, and can merge both into a single lease.

As a pre-requisite to adding support for NFSv4 migration to the Linux
NFS client, this patch changes the way Linux identifies itself to NFS
servers via the SETCLIENTID (NFSv4 minor version 0) and EXCHANGE_ID
(NFSv4 minor version 1) operations.

In addition to removing the server's IP address from nfs_client_id4,
the Linux NFS client will also no longer use its own source IP address
as part of the nfs_client_id4 string.  On multi-homed clients, the
value of this address depends on the address family and network
routing used to contact the server, thus it can be different for each
server.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, the Linux client uses a unique nfs_client_id4.id string
when identifying itself to distinct NFS servers.

To support transparent state migration, the Linux client will have to
use the same nfs_client_id4 string for all servers it communicates
with (also known as the "uniform client string" approach).  Otherwise
NFS servers can not recognize that open and lock state need to be
merged after a file system transition.

Unfortunately, there are some NFSv4.0 servers currently in the field
that do not tolerate the uniform client string approach.

Thus, by default, our NFSv4.0 mounts will continue to use the current
approach, and we introduce a mount option that switches them to use
the uniform model.  Client administrators must identify which servers
can be mounted with this option.  Eventually most NFSv4.0 servers will
be able to handle the uniform approach, and we can change the default.

The first mount of a server controls the behavior for all subsequent
mounts for the lifetime of that set of mounts of that server.  After
the last mount of that server is gone, the client erases the data
structure that tracks the lease.  A subsequent lease may then honor
a different "migration" setting.

This patch adds only the infrastructure for parsing the new mount
option.  Support for uniform client strings is added in a subsequent
patch.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>