- 21 10月, 2010 9 次提交
-
-
由 Jongpill Lee 提交于
This patch adds log messages of aclk_200, aclk_100, aclk_160, and aclk_133. And adds clk_p.rate from calculated aclk_100. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jongpill Lee 提交于
This patch adds struct clk clk_sclk_usbphy0, _usbphy1, and _hdmiphy for adding member of clkset_group_list. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds 'clkset_aclk' to use commonly. And removed struct clksrc_sources clkset_aclk_200, clkset_aclk_100, clkset_aclk_160, and clkset_aclk_133. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This pach removed unused clock on S5PV310/S5PC210. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds definition of clock address. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Changhwan Youn 提交于
This patch adds CPU hotplug support for S5PV310/S5PC210. Signed-off-by: NChanghwan Youn <chaos.youn@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
Universal board has 5 GPIO keys. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates Kconfig of mach-s5pv310 for easily dividing S5PC210 and S5PV310 boards. S5PC210(MCP) machines and S5PV310 machines can be build into one kernel, this will be provied/submitted when new defconfig can be merged. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds Samsung SMDKC210 board support file. The SoC of SMDKC210, S5PC210(MCP) is one of package option of S5PV310. And because composition of SMDKC210 and SMDKV310 differs, need SMDKC210 with SMDKV310. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 19 10月, 2010 1 次提交
-
-
由 Kukjin Kim 提交于
This patch fixes build error about GPIO address due to conflict of commit 4d914705 and 19a2c065. - commit 4d914705: Fix on GPIO base addresses - commit 19a2c065: Moves initial map for merging S5P64X0 Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 18 10月, 2010 18 次提交
-
-
由 SeungChull Suh 提交于
This patch adds header <linux/sched.h> into the below files for build with CONFIG_PREEMPT_NONE. arch/arm/mach-s5p64x0/cpu.c Signed-off-by: NSeung-Chull Suh <sc.suh@samsung.com> [kgene.kim@samsung.com: edited title and message] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Atul Dahiya 提交于
The patch removes s3c_gpio_lock/unlock to avoid acquiring the lock recursively as lock is already acquired by calling function. Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> [kgene.kim@samsung.com: removed useless variable due to this] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Abhilash Kesavan 提交于
The s5p64x0_sysclass should be used in place of the obselete s5p6440_sysclass. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Naveen Krishna Ch 提交于
Fix the touch screen device name from s3c64x0-adc to s3c64xx-adc. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates s5p64x0_defconfig and changes the name from s5p6440_defconfig so that can support S5P6440 and S5P6450 with one kernel. Tested on SMDK6440(S5P6440) and SMDK6450(S5P6450). Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds UART serial port support for S5P6450 SoC. The S5P6450 has 6 UARTs, so adds resource of UART4 and UART5. And to fix membase which is in serial/samsung.c is from Ben Dooks. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
-
由 Kukjin Kim 提交于
This patch moves smdk6440 board file from mach-s5p6440 into the new mach-s5p64x0 directory and adds smdk6450 board file. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves S5P6440 GPIO support files from mach-s5p6440 into the new mach-s5p64x0 for merge S5P6440 and S5P6450 SocS. NOTE: Not supported S5P6450 GPIO yet. Will be supported soon. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds S5P6450 I2C support in the ARCH_S5P64X0. And moves S5P6440 I2C support files into the mach-s5p64x0 together. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves DMA support files in the mach-s5p64x0 for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates Audio and SPI for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Jassi Brar <jassi.brar@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates timer support for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates IRQ support for S5P6440 and S5P6450 SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates regarding clock files for supporting S5P6440 and S5P6450 with one kernel image. The mach-s5p64x0/clock.c is for common of them and there are specific clock files for each SoCs. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds ARCH_S5P64X0 which can support S5P6440 and S5P6450 with one kernel image. So moved some files of mach-s5p6440 into the new ARCH directory mach-s5p64x0. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch updates the Kconfig and Makefile for the S5P6440 and S5P6450 machines. It also updates arch/arm/ Kconfig and Makefile to include for support ARCH_S5P64X0 with one kernel image. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves some initial maps from plat-s5p to machine, so that can merge mach-s5p6440 and mach-s5p6450. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
-
- 15 10月, 2010 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Tony Luck reports that the addition of the access_ok() check in commit 0eead9ab ("Don't dump task struct in a.out core-dumps") broke the ia64 compile due to missing the necessary header file includes. Rather than add yet another include (<asm/unistd.h>) to make everything happy, just uninline the silly core dump helper functions and move the bodies to fs/exec.c where they make a lot more sense. dump_seek() in particular was too big to be an inline function anyway, and none of them are in any way performance-critical. And we really don't need to mess up our include file headers more than they already are. Reported-and-tested-by: NTony Luck <tony.luck@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ehea: Fix a checksum issue on the receive path net: allow FEC driver to use fixed PHY support tg3: restore rx_dropped accounting b44: fix carrier detection on bind net: clear heap allocations for privileged ethtool actions NET: wimax, fix use after free ATM: iphase, remove sleep-inside-atomic ATM: mpc, fix use after free ATM: solos-pci, remove use after free net/fec: carrier off initially to avoid root mount failure r8169: use device model DMA API r8169: allocate with GFP_KERNEL flag when able to sleep
-
由 Linus Torvalds 提交于
akiphie points out that a.out core-dumps have that odd task struct dumping that was never used and was never really a good idea (it goes back into the mists of history, probably the original core-dumping code). Just remove it. Also do the access_ok() check on dump_write(). It probably doesn't matter (since normal filesystems all seem to do it anyway), but he points out that it's normally done by the VFS layer, so ... [ I suspect that we should possibly do "vfs_write()" instead of calling ->write directly. That also does the whole fsnotify and write statistics thing, which may or may not be a good idea. ] And just to be anal, do this all for the x86-64 32-bit a.out emulation code too, even though it's not enabled (and won't currently even compile) Reported-by: Nakiphie <akiphie@lavabit.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2010 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: ioat2: fix performance regression
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: Fix typo of time extends per page perf, MIPS: Support cross compiling of tools/perf for MIPS perf: Fix incorrect copy_from_user() usage
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: relax ioremap prohibition (309caa9c) for -final and -stable ARM: 6440/1: ep93xx: DMA: fix channel_disable cpuimx27: fix i2c bus selection cpuimx27: fix compile when ULPI is selected ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors ARM: fix section mismatch warnings in Versatile Express ARM: 6412/1: kprobes-decode: add support for MOVW instruction ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: iommu-load cam register before flushing the entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Silent spurious error message drm/radeon/kms: fix bad cast/shift in evergreen.c drm/radeon/kms: make TV/DFP table info less verbose drm/radeon/kms: leave certain CP int bits enabled drm/radeon/kms: avoid corner case issue with unmappable vram V2
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: For each node, register the memory blocks actually used x86, AMD, MCE thresholding: Fix the MCi_MISCj iteration order x86, mce, therm_throt.c: Fix missing curly braces in error handling logic
-
由 Dan Williams 提交于
Commit 07934481 "DMAENGINE: generic channel status v2" changed the interface for how dma channel progress is retrieved. It inadvertently exported an internal helper function ioat_tx_status() instead of ioat_dma_tx_status(). The latter polls the hardware to get the latest completion state, while the helper just evaluates the current state without touching hardware. The effect is that we end up waiting for completion timeouts or descriptor allocation errors before the completion state is updated. iperf (before fix): [SUM] 0.0-41.3 sec 364 MBytes 73.9 Mbits/sec iperf (after fix): [SUM] 0.0- 4.5 sec 499 MBytes 940 Mbits/sec This is a regression starting with 2.6.35. Cc: <stable@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Reported-by: NRichard Scobie <richard@sauce.co.nz> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-