There is no need to init the enable bit of cmq.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-5-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Current prompt message is uncorrect when destroying qp, add qpn
information when creating qp.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Link: https://lore.kernel.org/r/1565276034-97329-4-git-send-email-oulijun@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function hns_roce_v2_cleanup_eq_table:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5920:6:
 warning: variable irq_num set but not used [-Wunused-but-set-variable]

It is not used since
commit 33db6f94 ("RDMA/hns: Refactor eq table init for hip08")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731073748.17664-1-yuehaibing@huawei.comSigned-off-by: NDoug Ledford <dledford@redhat.com>

To make the code more readable, move the part of naming irq and request
irq out of eq table init into a separate function.

Link: https://lore.kernel.org/r/1562593285-8037-10-git-send-email-oulijun@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, more than 20 lines of duplicate code exist in function
'modify_qp_init_to_init' and function 'modify_qp_reset_to_init', which
affects the readability of the code. Consolidate them.

Link: https://lore.kernel.org/r/1562593285-8037-6-git-send-email-oulijun@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move some lines which exist hns_roce_v2_modify_qp function into a new
function. The code refactored mainly includes some absolute fields of qp
context and some optional fields of qp context.

Link: https://lore.kernel.org/r/1562593285-8037-4-git-send-email-oulijun@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Here Clean up unnecessary initial value for some variable.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When hw resetting, there is no response from hw when driver sending cmdq.
If driver still send cmdq to hw, the reset process may be blocked.  So
reset flag should be set to intercept the cmdq command when driver
receiving "notify down" signal.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the depth of cq only supports 64K.  According to the UM, the
depth of cq is up to 4M, Therefore the ba page size of cqe was modified to
support the maximum specification of cq depth.
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It uses hns_roce_mtr_init in hns_roce_create_qp_common function.  As a
result, it should use hns_roce_mtr_cleanup function for cleaning mtr when
destroying qp.

Fixes: 8d18ad83 ("RDMA/hns: Fix bug when wqe num is larger than 16K")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning:
 variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In commit af7ddd8a ("Merge tag 'dma-mapping-4.21' of
git://git.infradead.org/users/hch/dma-mapping"),
dma_alloc_coherent/dmam_alloc_coherent always zeroed the returned memory.
So the memset after a coherent allocation function is not needed.
Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This function is supposed to return negative kernel error codes but here
it returns CMD_RST_PRC_EBUSY (2).  The error code eventually gets passed
to IS_ERR() and since it's not an error pointer it leads to an Oops in
hns_roce_v1_rsv_lp_qp()
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update ib_umem_release() to behave similarly to kfree() and allow
submitting NULL pointer as safe input to this function.

Fixes: a52c8e24 ("RDMA: Clean destroy CQ in drivers do not return errors")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

During removing the driver, we needs to notify the roce engine to
stop working immediately,and symmetrically recycle the hardware
resources requested during initialization.

The hardware provides a command called function clear that can package
these operations,so that the driver can only focus on releasing
resources that applied from the operating system.
This patch implements the call of this command.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

hip08 can support up to 32768 wqes in one qp. currently if the wqe num
is larger than 16384, the driver will lead a calltrace as follows.

[21361.393725] Call trace:
[21361.398605]  hns_roce_v2_modify_qp+0xbcc/0x1360 [hns_roce_hw_v2]
[21361.410627]  hns_roce_modify_qp+0x1d8/0x2f8 [hns_roce]
[21361.420906]  _ib_modify_qp+0x70/0x118
[21361.428222]  ib_modify_qp+0x14/0x1c
[21361.435193]  rt_ktest_modify_qp+0xb8/0x650 [rdma_test]
[21361.445472]  exec_modify_qp_cmd+0x110/0x4d8 [rdma_test]
[21361.455924]  rt_ktest_dispatch_cmd_3+0xa94/0x2edc [rdma_test]
[21361.467422]  rt_ktest_dispatch_cmd_2+0x9c/0x108 [rdma_test]
[21361.478570]  rt_ktest_dispatch_cmd+0x138/0x904 [rdma_test]
[21361.489545]  rt_ktest_dev_write+0x328/0x4b0 [rdma_test]
[21361.499998]  __vfs_write+0x38/0x15c
[21361.506966]  vfs_write+0xa8/0x1a0
[21361.513586]  ksys_write+0x50/0xb0
[21361.520206]  sys_write+0xc/0x14
[21361.526479]  el0_svc_naked+0x30/0x34
[21361.533622] Code: 1ac10841 d37d7c22 0b000021 d37df021 (f86268c0)
[21361.545815] ---[ end trace e2a1feb2c3d7f13c ]---

When the wqe num is larger than 16384, hns_roce_table_find will return an
invalid mtt, this will lead an kernel paging requet error if the driver try
to access it. It's the mtt design defect which can't support up to the max
wqe num of hip08.

This patch fixs it by replacing mtt with mtr for wqe.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When user post recv a srq with multiple sges, the hardware will get the
last correct sge and count the sge numbers according to the specific
identifier with lkey. For example, when the driver fills the sges with
every wr less than the max sge that the user configured when creating srq,
the hardware will stop getting the sge according to the specific lkey in
the sge. However, it will always end with the first sge in the current
post srq recv interface implementation.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When the user submits more than 32 work request to a srq queue
at a time, it needs to find the corresponding number of entries
in the bitmap in the idx queue. However, the original lookup
function named ffs only processes 32 bits of the array element,
When the number of srq wqe issued exceeds 32, the ffs will only
process the lower 32 bits of the elements, it will not be able
to get the correct wqe index for srq wqe.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch makes the code more readable by removing magic numbers.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to print when communication is established, especially
while lots of qp used by application.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Instead of RoCE drivers figuring out vlan, smac fields while working on
QP/AH, provide a helper routine to read the L2 fields such as vlan_id and
source mac address.

This moves logic from mlx5 driver to core for wider usage for RoCE ports.

This is a preparation patch to allow detaching netdev in subsequent patch.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In mhop 0 mode, 64*bt_num queues can be supported.
In mhop 1 mode, 32K*bt_num queues can be supported.
Config srqc_hop_num to 1 to support 1M SRQ queues.
Signed-off-by: Nchenglang <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds support of resource track for hip08 and take dumping cq
context state used for debugging as an example.  More resources track
supports for hns driver will be added in future.

The output should be as follows.
$ rdma res show cq dev hnseth0 -d
dev hnseth0 cqe 1023 users 2 poll-ctx WORKQUEUE pid 0 comm [ib_core] drv_state 2 drv_ceq
n 0 drv_cqn 0 drv_hopnum 1 drv_pi 0 drv_ci 0 drv_coalesce 0 drv_period 0 drv_cnt 0
Signed-off-by: NTao Tian <tiantao6@huawei.com>
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: Nchenglang <chenglang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that we have the udata passed to all the ib_xxx object destroy APIs
and the additional macro 'rdma_udata_to_drv_context' to get the
ib_ucontext from ib_udata stored in uverbs_attr_bundle, we can finally
start to remove the dependency of the drivers in the
ib_xxx->uobject->context.
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x
destroy path as ib_udata. The next patch will use the ib_udata to free the
drivers destroy path from the dependency in 'uobject->context' as we
already did for the create path.
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The forgotten static keyword causes to the following error to appear while
building HNS driver. Declare hns_roce_cmq_send() to be static function to
fix this warning.

drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1089:5: warning: no previous
prototype for _hns_roce_cmq_send_ [-Wmissing-prototypes]
 int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,

Fixes: 6a04aed6 ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The src_mac array is not used in hns_roce_v2_modify_qp function.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

According to IB protocol, the send with invalidate operation will not
invalidate mr that was created through a register mr or reregister mr.

Fixes: e93df010 ("RDMA/hns: Support local invalidate for hip08 in kernel space")
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The driver should not print the error information when the hip08 driver
not support virtual function.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

According to IB protocol, some fields of qp context are filled with
optional when the relatived attr_mask are set. The relatived attr_mask
include IB_QP_TIMEOUT, IB_QP_RETRY_CNT, IB_QP_RNR_RETRY and
IB_QP_MIN_RNR_TIMER.  Besides, we move some assignments of the fields of
qp context into the outside of the specific qp state jump function.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Only when the IB_QP_RQ_PSN flags of attr_mask is set is it valid to assign
the relatived fields of rq'psn into the qp context when modified qp.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Only when the IB_QP_SQ_PSN flags of attr_mask is set is it valid to assign
the relatived fields of psn into the qp context when modified qp.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The the below commit, hns_roce_v2_modify_qp is called inside spinlock
while using GFP_KERNEL. Change it to GFP_ATOMIC.

Fixes: 0425e3e6 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The method of set hem for scc context is different from other contexts. It
should notify the hardware with the detailed idx in bt0 for scc, while for
other contexts, it only need to notify the bt step and the hardware will
calculate the idx.

Here fixes the following error when unloading the hip08 driver:

[  123.570768] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
[  123.579023] {1}[Hardware Error]: event severity: recoverable
[  123.584670] {1}[Hardware Error]:  Error 0, type: recoverable
[  123.590317] {1}[Hardware Error]:   section_type: PCIe error
[  123.595877] {1}[Hardware Error]:   version: 4.0
[  123.600395] {1}[Hardware Error]:   command: 0x0006, status: 0x0010
[  123.606562] {1}[Hardware Error]:   device_id: 0000:7d:00.0
[  123.612034] {1}[Hardware Error]:   slot: 0
[  123.616120] {1}[Hardware Error]:   secondary_bus: 0x00
[  123.621245] {1}[Hardware Error]:   vendor_id: 0x19e5, device_id: 0xa222
[  123.627847] {1}[Hardware Error]:   class_code: 000002
[  123.632977] hns3 0000:7d:00.0: aer_status: 0x00000000, aer_mask: 0x00000000
[  123.639928] hns3 0000:7d:00.0: aer_layer=Transaction Layer, aer_agent=Receiver ID
[  123.647400] hns3 0000:7d:00.0: aer_uncor_severity: 0x00000000
[  123.653136] hns3 0000:7d:00.0: PCI error detected, state(=1)!!
[  123.658959] hns3 0000:7d:00.0: ROCEE uncorrected RAS error identified
[  123.665395] hns3 0000:7d:00.0: ROCEE RAS AXI rresp error
[  123.670713] hns3 0000:7d:00.0: requesting reset due to PCI error
[  123.676715] hns3 0000:7d:00.0: received reset event , reset type is 5
[  123.683147] hns3 0000:7d:00.0: AER: Device recovery successful
[  123.688978] hns3 0000:7d:00.0: PF Reset requested
[  123.693684] hns3 0000:7d:00.0: PF failed(=-5) to send mailbox message to VF
[  123.700633] hns3 0000:7d:00.0: inform reset to vf(1) failded -5!

Fixes: 6a157f7d ("RDMA/hns: Add SCC context allocation support for hip08")
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Reviewed-by: NYixian Liu <liuyixian@huawei.com>
Reviewed-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Current all messages printed for aeq subtype event are wrong.  Thus,
delete them and only the value of subtype event is printed.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The state of mr after reregister operation should be set to valid
state. Otherwise, it will keep the same as the state before reregistered.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch modifies the minimum CQ depth specification of hip08 and is
consistent with the processing of hip06.
Signed-off-by: Nchenglang <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped
SGL and get the page DMA address. This avoids the extra loop to iterate
pages in the SGE when for_each_sg iterator is used.

Additionally, purge umem->page_shift usage in the driver as its only
relevant for ODP MRs. Use system page size and shift instead.
Signed-off-by: NShiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

On hi08 chip, There is a possibility of chip hanging when sending doorbell
during reset. We can fix it by prohibiting doorbell during reset.

Fixes: 2d407888 ("RDMA/hns: Add support for processing send wr and receive wr")
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset.  We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>