All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.

Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV.  This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To match with the definition in psp firmware
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLe Ma <le.ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

cache rlcv/rlcvp ucode version info in amdgpu_gfx
structure
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

cache rlcv/rlcvp ucode version info in amdgpu_gfx
structure
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

copy ras driver to psp if present
Signed-off-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing structure to avoid incorrect size and version check.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing structure to avoid incorrect size and version check.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support {GLOBAL/SE0/SE1/SE2/SE3}_TAP_DELAYS uploading.

v2: upload TAP_DELAYS before RLC autoload was triggered. (Hawking)
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add sdma firmware struct version 2 to support new SDMA v6 and forward
firmware version.

v2: squash in fix
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use 0 for legacy backdoor and 1 for frontdoor.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update to use new SDMA UCODE ID when init sdma microcode for sdma6
with psp front door load type.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add convert for CP RS64 related gfx ip type.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support for front door to load IMU firmware.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed for MES KIQ firmware loading.
Signed-off-by: NJack Xiao <Jack.Xiao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support RLCV firmware front door load.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support RLCP firmware front door load.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add IMU firmware structure.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for rlc v2_3 to support RLCV and RLCP fw load.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need define new firmware header to support
CP RS64 fw.
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With SCPM enabled, pptable cannot be uploaded to SMU directly.
The transferring has to be via PSP.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add function to decode IP version.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
As PSP needs to verify the signature, CAP firmware must be loaded first when PSP loads firmwares.
Otherwise, when DFC feature is enabled, CP firmwares would be loaded failed.

[ 1149.160480] [drm] MM table gpu addr = 0x800022f000, cpu addr = 00000000a62afcea.
[ 1149.209874] [drm] failed to load ucode CP_CE(0x8)
[ 1149.209878] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.215914] [drm] failed to load ucode CP_PFP(0x9)
[ 1149.215917] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.221941] [drm] failed to load ucode CP_ME(0xA)
[ 1149.221944] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.228082] [drm] failed to load ucode CP_MEC1(0xB)
[ 1149.228085] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.234209] [drm] failed to load ucode CP_MEC2(0xD)
[ 1149.234212] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.242379] [drm] failed to load ucode VCN(0x1C)
[ 1149.242382] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)

[How]
Move CAP UCODE ID to the beginning of AMDGPU_UCODE_ID enum list.
Signed-off-by: NYifan Zha <Yifan.Zha@amd.com>
Reviewed-by: NBokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Add interface to load SRIOV cap FW. If the FW does not
  exist, simply skip this FW loading routine.
  This FW will only be loaded under SRIOV. Other driver
  configuration will not be affected.
  By adding this interface, it will make us easier to
  prepare SRIOV Linux guest driver for different users.

- Update sysfs interface to read cap FW version.

- Refactor PSP FW loading routine under SRIOV to use a
  unified SWITCH statement instead of using IF statement

- Remove redundant amdgpu_sriov_vf() check in FW loading
  routine
Acked-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NCandice Li <candice.li@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Detect psp driver binaries packed into FW and try to load the FW
Signed-off-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Improved handling for scalling PSP FW binaries
Signed-off-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement function amdgpu_ucode_name to show ucode name
via ucode id.

v2: rename it to amdgpu_ucode_name
Signed-off-by: NLang Yu <Lang.Yu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

synchronized fw header with latest source
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

updated psp bin parsing and load register list

v2: update to latest interface (Alex)
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

refine PSP TA firmware info print in amdgpu_firmware_info().
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add interface to load, unload, invoke command for
secure display TA.

v2: Add debugfs interface for secure display TA
v3: fix warning in copy_from_user (Alex)
Signed-off-by: NJinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support to load RLC iram and dram ucode when RLC firmware struct use v2.2
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support to load RLC iram and dram ucode when RLC firmware struct use v2.2
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable the RAP TA loading path and add RAP test
trigger interface.

v2: fix potential mem leak issue
Signed-off-by: NWenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: NGuchun Chen <Guchun.Chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

added definition for ta_firmware_header_v2_0
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for PSP SPL (Security patch level) table to support
anti-rollback of FW loaded by Trusted OS.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 29e2501f.
Signed-off-by: NZhigang Luo <zhigang.luo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The CAP fw is for enabling driver compatibility. Currently, it only
enabled for vega10 VF.
Signed-off-by: NZhigang Luo <zhigang.luo@amd.com>
Reviewed-by: NShaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Per confirmation with RLC firmware team, the RLC should
be unhalted after all RLC related firmwares uploaded.
However, in fact the RLC is unhalted immediately after
RLCG firmware uploaded. And that may causes unexpected
PSP hang on loading the succeeding RLC save restore
list related firmwares.
So, we correct the firmware loading sequence to load
RLC save restore list related firmwares before RLCG
ucode. That will help to get around this issue.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Per confirmation with RLC firmware team, the RLC should
be unhalted after all RLC related firmwares uploaded.
However, in fact the RLC is unhalted immediately after
RLCG firmware uploaded. And that may causes unexpected
PSP hang on loading the succeeding RLC save restore
list related firmwares.
So, we correct the firmware loading sequence to load
RLC save restore list related firmwares before RLCG
ucode. That will help to get around this issue.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org