Marvell PPv2 Packer Header Parser has a TCAM based filter, that is not
trivial to configure and debug. Being able to dump TCAM entries from
userspace can be really helpful to help development of new features
and debug existing ones.

This commit adds a basic debugfs interface for the PPv2 driver, focusing
on TCAM related features.

<mnt>/mvpp2/ --- f2000000.ethernet
              \- f4000000.ethernet --- parser --- 000 ...
                                    |          \- 001
                                    |          \- ...
                                    |          \- 255 --- ai
                                    |                  \- header_data
                                    |                  \- lookup_id
                                    |                  \- sram
                                    |                  \- valid
                                    \- eth1 ...
                                    \- eth2 --- mac_filter
                                             \- parser_entries
                                             \- vid_filter

There's one directory per PPv2 instance, named after pdev->name to make
sure names are uniques. In each of these directories, there's :

 - one directory per interface on the controller, each containing :

   - "mac_filter", which lists all filtered addresses for this port
     (based on TCAM, not on the kernel's uc / mc lists)

   - "parser_entries", which lists the indices of all valid TCAM
      entries that have this port in their port map

   - "vid_filter", which lists the vids allowed on this port, based on
     TCAM

 - one "parser" directory (the parser is common to all ports), containing :

   - one directory per TCAM entry (256 of them, from 0 to 255), each
     containing :

     - "ai" : Contains the 1 byte Additional Info field from TCAM, and

     - "header_data" : Contains the 8 bytes Header Data extracted from
       the packet

     - "lookup_id" : Contains the 4 bits LU_ID

     - "sram" : contains the raw SRAM data, which is the result of the TCAM
		lookup. This readonly at the moment.

     - "valid" : Indicates if the entry is valid of not.

All entries are read-only, and everything is output in hex form.
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the appropriate SPDX license identifiers and drop the license text.
This patch is only cosmetic.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-15

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various different arm32 JIT improvements in order to optimize code emission
   and make the JIT code itself more robust, from Russell.

2) Support simultaneous driver and offloaded XDP in order to allow for advanced
   use-cases where some work is offloaded to the NIC and some to the host. Also
   add ability for bpftool to load programs and maps beyond just the cgroup case,
   from Jakub.

3) Add BPF JIT support in nfp for multiplication as well as division. For the
   latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong.

4) Add BTF pretty print functionality to bpftool in plain and JSON output
   format, from Okash.

5) Add build and installation to the BPF helper man page into bpftool, from Quentin.

6) Add a TCP BPF callback for listening sockets which is triggered right after
   the socket transitions to TCP_LISTEN state, from Andrey.

7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup
   tree and prints all attached programs, from Roman.

8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged
   packets, from Jesper.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrey Ignatov says:

====================
This patchset adds TCP-BPF callback for listening sockets.

Patch 0001 provides more details and is the main patch in the set.

Patch 0006 adds selftest for the new callback.

Other patches are bug fixes and improvements in TCP-BPF selftest
to make it easier to extend in 0006.
====================
Acked-by: NLawrence Brakmo <brakmo@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Cover new TCP-BPF callback in test_tcpbpf: when listen() is called on
socket, set BPF_SOCK_OPS_STATE_CB_FLAG so that BPF_SOCK_OPS_STATE_CB
callback can be called on future state transition, and when such a
transition happens (TCP_LISTEN -> TCP_CLOSE), track it in the map and
verify it in user space later.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Reduce amount of copy/paste for debug info when result is verified in
the test and keep that info together with values being checked so that
they won't get out of sync.

It also improves debug experience: instead of checking manually what
doesn't match in debug output for all fields, only unexpected field is
printed.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Switch to cgroup_helpers to simplify the code and fix cgroup cleanup:
before cgroup was not cleaned up after the test.

It also removes SYSTEM macro, that only printed error, but didn't
terminate the test.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Lack of const in cgroup helpers signatures forces to write ugly client
code. Fix it.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sync BPF_SOCK_OPS_TCP_LISTEN_CB related UAPI changes to tools/.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add new TCP-BPF callback that is called on listen(2) right after socket
transition to TCP_LISTEN state.

It fills the gap for listening sockets in TCP-BPF. For example BPF
program can set BPF_SOCK_OPS_STATE_CB_FLAG when socket becomes listening
and track later transition from TCP_LISTEN to TCP_CLOSE with
BPF_SOCK_OPS_STATE_CB callback.

Before there was no way to do it with TCP-BPF and other options were
much harder to work with. E.g. socket state tracking can be done with
tracepoints (either raw or regular) but they can't be attached to cgroup
and their lifetime has to be managed separately.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Ido Schimmel says:

====================
mlxsw: Add VRRP support

When a router that is acting as the default gateway of a host stops
functioning, the host will encounter packet loss until the router starts
functioning again.

To increase the reliability of the default gateway without performing
reconfiguration on the host, a host can use a Virtual Router Redundancy
Protocol (VRRP) Router. This virtual router is composed from several
routers where only one is actually forwarding packets from the host (the
master router) while the other routers act as backup routers. The
election of the master router is determined by the VRRP protocol [1].

Packets addressed to the virtual router are always sent to the virtual
router MAC address (IPv4: 00-00-5E-00-01-XX, IPv6: 00-00-5E-00-02-XX).
Such packets can only be accepted by the master router and must be
discarded by the backup routers.

In Linux, VRRP is usually implemented by configuring a macvlan with the
virtual router MAC on top of the router interface that is connected to
the host / LAN. The macvlan on the master router is assigned the virtual
IP (VIP) that the host uses as its gateway.

In order to support VRRP in mlxsw, we first need to enable macvlan upper
devices on top of mlxsw netdevs and their uppers. This is done by the
first patch, which also takes care of sanitizing macvlan configurations
that are not currently supported by the driver.

The second patch directs packets with destination MAC addresses as the
macvlans to the router so that they will undergo an L3 lookup. This is
consistent with the kernel's behavior where the macvlan's Rx handler
will re-inject such packets to the Rx path so that they will be picked
up by the IPvX protocol handlers and undergo an L3 lookup. Note that the
driver prevents the macvlans from being enslaved to other devices, to
ensure the packets will be picked up by the protocol handler and not by
another Rx handler.

The third patch adds packet traps for VRRP control packets for both IPv4
and IPv6. Finally, the last patch optimizes the reception of VRRP MACs
by potentially skipping one L2 lookup for them.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hosts using a VRRP router send their packets with a destination MAC of
the VRRP router which is of the following form [1]:

IPv4 - 00-00-5E-00-01-{VRID}
IPv6 - 00-00-5E-00-02-{VRID}

Where VRID is the ID of the virtual router. Such packets are directed to
the router block in the ASIC by an FDB entry that was added in the
previous patch.

However, in certain cases it is possible to skip this FDB lookup and
send such packets directly to the router. This is accomplished by adding
these special MAC addresses to the RIF cache. If the cache is hit, the
packet will skip the L2 lookup and ingress the router with the RIF
specified in the cache entry.

1. https://tools.ietf.org/html/rfc5798#section-7.3Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Virtual Router Redundancy Protocol packets are used to communicate the
state of the Master router associated with the virtual router ID (VRID).

These are link-local multicast packets sent with IP protocol 112 that
are trapped in the router block in the ASIC.

Add a trap for these packets and mark the trapped packets to prevent
them from potentially being re-flooded by the bridge driver.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An IP packet received on a netdev with a macvlan upper whose MAC matches
the packet's destination MAC will be re-injected to the Rx path as if it
was received by the macvlan, and perform an L3 lookup.

Reflect this functionality to the ASIC by programming FDB entries that
will direct MACs of macvlan uppers to the router.

In a similar fashion to router interfaces (RIFs) that are programmed
upon the addition of the first IP address on an interface and destroyed
upon the removal of the last IP address, the FDB entries for the macvlan
are added and destroyed based on the addition of the first and removal
of the last IP address on the macvlan.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to allow more unicast MAC addresses (e.g., VRRP virtual MAC) to
be directed to the router we need to enable macvlan uppers on top of
mlxsw netdevs.

Allow macvlan upper devices on top of mlxsw netdevs and sanitize
configurations that can't work. For example, a macvlan can't be enslaved
to a bridge as without ACLs the device doesn't take the destination MAC
into account when classifying a packet to a bridge instance (i.e., a
FID).
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reviewed-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_rcv_nxt_update() is already executed in tcp_data_queue().
This line is redundant.

See bellow,
	tcp_queue_rcv
		tcp_rcv_nxt_update(tcp_sk(sk), TCP_SKB_CB(skb)->end_seq);
	tcp_rcv_nxt_update(tp, TCP_SKB_CB(skb)->end_seq); <<<< redundant
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch augments the output of bpftool's map dump and map lookup
commands to print data along side btf info, if the correspondin btf
info is available. The outputs for each of  map dump and map lookup
commands are augmented in two ways:

1. when neither of -j and -p are supplied, btf-ful map data is printed
whose aim is human readability. This means no commitments for json- or
backward- compatibility.

2. when either -j or -p are supplied, a new json object named
"formatted" is added for each key-value pair. This object contains the
same data as the key-value pair, but with btf info. "formatted" object
promises json- and backward- compatibility. Below is a sample output.

$ bpftool map dump -p id 8
[{
        "key": ["0x0f","0x00","0x00","0x00"
        ],
        "value": ["0x03", "0x00", "0x00", "0x00", ...
        ],
        "formatted": {
                "key": 15,
                "value": {
                        "int_field":  3,
                        ...
                }
        }
}
]

This patch calls btf_dumper introduced in previous patch to accomplish
the above. Indeed, btf-ful info is only displayed if btf data for the
given map is available. Otherwise existing output is displayed as-is.
Signed-off-by: NOkash Khawaja <osk@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This consumes functionality exported in the previous patch. It does the
main job of printing with BTF data. This is used in the following patch
to provide a more readable output of a map's dump. It relies on
json_writer to do json printing. Below is sample output where map keys
are ints and values are of type struct A:

typedef int int_type;
enum E {
        E0,
        E1,
};

struct B {
        int x;
        int y;
};

struct A {
        int m;
        unsigned long long n;
        char o;
        int p[8];
        int q[4][8];
        enum E r;
        void *s;
        struct B t;
        const int u;
        int_type v;
        unsigned int w1: 3;
        unsigned int w2: 3;
};

$ sudo bpftool map dump id 14
[{
        "key": 0,
        "value": {
            "m": 1,
            "n": 2,
            "o": "c",
            "p": [15,16,17,18,15,16,17,18
            ],
            "q": [[25,26,27,28,25,26,27,28
                ],[35,36,37,38,35,36,37,38
                ],[45,46,47,48,45,46,47,48
                ],[55,56,57,58,55,56,57,58
                ]
            ],
            "r": 1,
            "s": 0x7ffd80531cf8,
            "t": {
                "x": 5,
                "y": 10
            },
            "u": 100,
            "v": 20,
            "w1": 0x7,
            "w2": 0x3
        }
    }
]

This patch uses json's {} and [] to imply struct/union and array. More
explicit information can be added later. For example, a command line
option can be introduced to print whether a key or value is struct
or union, name of a struct etc. This will however come at the expense
of duplicating info when, for example, printing an array of structs.
enums are printed as ints without their names.
Signed-off-by: NOkash Khawaja <osk@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch introduces btf__resolve_type() function and exports two
existing functions from libbpf. btf__resolve_type follows modifier
types like const and typedef until it hits a type which actually takes
up memory, and then returns it. This function follows similar pattern
to btf__resolve_size but instead of computing size, it just returns
the type.

These  functions will be used in the followig patch which parses
information inside array of `struct btf_type *`. btf_name_by_offset is
used for printing variable names.
Signed-off-by: NOkash Khawaja <osk@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

perf propagates its feature check results to libbpf.  This means
features for which perf probes must be a superset of libbpf's
required features.  perf depends on FEATURE_TESTS_BASIC for its list
of features.

commit 531b014e ("tools: bpf: make use of reallocarray") added
reallocarray use to libbpf, make perf also perform the reallocarray
feature check.

Fixes: 531b014e ("tools: bpf: make use of reallocarray")
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Fixes: f9358e12 ("net: mvpp2: split ingress traffic into multiple flows")
Signed-off-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By a simple extension of of_phy_get_and_connect() drivers
that have a fixed link on e.g. RGMII can support also
fixed links, so in addition to:

ethernet-port {
	phy-mode = "rgmii";
	phy-handle = <&foo>;
};

This setup with a fixed-link node and no phy-handle will
now also work just fine:

ethernet-port {
	phy-mode = "rgmii";
	fixed-link {
		speed = <1000>;
		full-duplex;
		pause;
	};
};

This is very helpful for connecting random ethernet ports
to e.g. DSA switches that typically reside on fixed links.

The phy-mode is still there as the fixes link in this case
is still an RGMII link.

Tested on the Cortina Gemini driver with the Vitesse DSA
router chip on a fixed 1Gbit link.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend struct tcf_walker with additional 'cookie' field. It is intended to
be used by classifier walk implementations to continue iteration directly
from particular filter, instead of iterating 'skip' number of times.

Change flower walk implementation to save filter handle in 'cookie'. Each
time flower walk is called, it looks up filter with saved handle directly
with idr, instead of iterating over filter linked list 'skip' number of
times. This change improves complexity of dumping flower classifier from
quadratic to linearithmic. (assuming idr lookup has logarithmic complexity)
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reported-by: NSimon Horman <simon.horman@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

People noticed that the code match on IEEE 802.1ad (ETH_P_8021AD) ethertype,
and this implies Q-in-Q or double tagged VLANs.  Thus, we better parse
the next VLAN header too.  It is even marked as a TODO.

This is relevant for real world use-cases, as XDP cpumap redirect can be
used when the NIC RSS hashing is broken.  E.g. the ixgbe driver HW cannot
handle double tagged VLAN packets, and places everything into a single
RX queue.  Using cpumap redirect, users can redistribute traffic across
CPUs to solve this, which is faster than the network stacks RPS solution.

It is left as an exerise how to distribute the packets across CPUs.  It
would be convenient to use the RX hash, but that is not _yet_ exposed
to XDP programs. For now, users can code their own hash, as I've demonstrated
in the Suricata code (where Q-in-Q is handled correctly).
Reported-by: NFlorian Maury <florian.maury-cv@x-cli.eu>
Reported-by: NMarek Majkowski <marek@cloudflare.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch adds support for IGMPMSG_WRVIFWHOLE which is used to pass
full packet and real vif id when the incoming interface is wrong.
While the RP and FHR are setting up state we need to be sending the
registers encapsulated with all the data inside otherwise we lose it.
The RP then decapsulates it and forwards it to the interested parties.
Currently with WRONGVIF we can only be sending empty register packets
and will lose that data.
This behaviour can be enabled by using MRT_PIM with
val == IGMPMSG_WRVIFWHOLE. This doesn't prevent IGMPMSG_WRONGVIF from
happening, it happens in addition to it, also it is controlled by the same
throttling parameters as WRONGVIF (i.e. 1 packet per 3 seconds currently).
Both messages are generated to keep backwards compatibily and avoid
breaking someone who was enabling MRT_PIM with val == 4, since any
positive val is accepted and treated the same.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
This set is adding support for loading driver and offload XDP
at the same time.  This enables advanced use cases where some
of the work is offloaded to the NIC and some is done by the host.
Separate netlink attributes are added for each mode of operation.
Driver callbacks for offload are cleaned up a little, including
removal of .prog_attached flag.
====================
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Split handling of offloaded and driver programs completely.  Since
offloaded programs always come with XDP_FLAGS_HW_MODE set in reality
there could be no sharing, anyway, programs would only be installed
in driver or in hardware.  Splitting the handling allows us to install
programs in HW and in driver at the same time.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add tests for having an XDP program attached in the driver and
another one attached in HW simultaneously.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Allow netdevsim to accept driver and offload attachment of XDP
BPF programs at the same time.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Split the query of HW-attached program from the software one.
Introduce new .ndo_bpf command to query HW-attached program.
This will allow drivers to install different programs in HW
and SW at the same time.  Netlink can now also carry multiple
programs on dump (in which case mode will be set to
XDP_ATTACHED_MULTI and user has to check per-attachment point
attributes, IFLA_XDP_PROG_ID will not be present).  We reuse
IFLA_XDP_PROG_ID skb space for second mode, so rtnl_xdp_size()
doesn't need to be updated.

Note that the installation side is still not there, since all
drivers currently reject installing more than one program at
the time.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Basic operations drivers perform during xdp setup and query can
be moved to helpers in the core.  Encapsulate program and flags
into a structure and add helpers.  Note that the structure is
intended as the "main" program information source in the driver.
Most drivers will additionally place the program pointer in their
fast path or ring structures.

The helpers don't have a huge impact now, but they will
decrease the code duplication when programs can be installed
in HW and driver at the same time.  Encapsulating the basic
operations in helpers will hopefully also reduce the number
of changes to drivers which adopt them.

Helpers could really be static inline, but they depend on
definition of struct netdev_bpf which means they'd have
to be placed in netdevice.h, an already 4500 line header.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

prog_attached of struct netdev_bpf should have been superseded
by simply setting prog_id long time ago, but we kept it around
to allow offloading drivers to communicate attachment mode (drv
vs hw).  Subsequently drivers were also allowed to report back
attachment flags (prog_flags), and since nowadays only programs
attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell
the attachment mode from the flags driver reports.  Remove
prog_attached member.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

In preparation for support of simultaneous driver and hardware XDP
support add per-mode attributes.  The catch-all IFLA_XDP_PROG_ID
will still be reported, but user space can now also access the
program ID in a new IFLA_XDP_<mode>_PROG_ID attribute.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Russell King says:

====================
Four further jit compiler improves for 32-bit ARM.
====================
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Improbe the 64-bit ALU implementation from:

  movw    r8, #65532
  movt    r8, #65535
  movw    r9, #65535
  movt    r9, #65535
  ldr     r7, [fp, #-44]
  adds    r7, r7, r8
  str     r7, [fp, #-44]
  ldr     r7, [fp, #-40]
  adc     r7, r7, r9
  str     r7, [fp, #-40]

to:

  movw    r8, #65532
  movt    r8, #65535
  movw    r9, #65535
  movt    r9, #65535
  ldrd    r6, [fp, #-44]
  adds    r6, r6, r8
  adc     r7, r7, r9
  strd    r6, [fp, #-44]
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Improve the 64-bit store implementation from:

  ldr     r6, [fp, #-8]
  str     r8, [r6]
  ldr     r6, [fp, #-8]
  mov     r7, #4
  add     r7, r6, r7
  str     r9, [r7]

to:

  ldr     r6, [fp, #-8]
  str     r8, [r6]
  str     r9, [r6, #4]

We leave the store as two separate STR instructions rather than using
STRD as the store may not be aligned, and STR can handle misalignment.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Improve the 64-bit sign-extended immediate from:

  mov     r6, #1
  str     r6, [fp, #-52]  ; 0xffffffcc
  mov     r6, #0
  str     r6, [fp, #-48]  ; 0xffffffd0

to:

  mov     r6, #1
  mov     r7, #0
  strd    r6, [fp, #-52]  ; 0xffffffcc
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Rather than writing each 32-bit half of the 64-bit immediate value
separately when the register is on the stack:

  movw    r6, #45056      ; 0xb000
  movt    r6, #60979      ; 0xee33
  str     r6, [fp, #-44]  ; 0xffffffd4
  mov     r6, #0
  str     r6, [fp, #-40]  ; 0xffffffd8

arrange to use the double-word store when available instead:

  movw    r6, #45056      ; 0xb000
  movt    r6, #60979      ; 0xee33
  mov     r7, #0
  strd    r6, [fp, #-44]  ; 0xffffffd4
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The hardware supposedly handles frames up to 10236 bytes and
implements .ndo_change_mtu() so accept 10236 minus the ethernet
header for a VLAN tagged frame on the netdevices. Use
ETH_MIN_MTU as minimum MTU.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The initialization sequence for the ethernet, setting up
interrupt routing and such things, need to be done after
both the ports are clocked and reset. Before this the
config will not "take". Move the initialization to the
port probe function and keep track of init status in
the state.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>