The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.

This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de

Only single instances of CRTC and connector are supported per
device. Embed both in ast's structure and remove the individual
memory allocations. DRM's CRTC cleanup helpers replace the rsp.
destroy function in ast.

While at it, also convert to_ast_connector() to a function.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-2-tzimmermann@suse.de

Cleaning up ast's MM code with ast_mm_fini() resets the write-combine
flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto-
release callback. Releasing the device also executes the callback.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de

VRAM size detection is only relevant to the memory management. Move
the code into ast_mm.c.

While at it, rename the function to ast_get_vram_size(). The function
argument's type is now struct ast_private. The result is stored in a
local variable and not in struct ast_private any longer.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de

There's modesetting init code in ast_main.c. Move it to ast_mode.c and
merge it with the modesetting init code in ast_mode_init(). The result
is ast_mode_config_init(), which initalizes the whole modesetting.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-15-tzimmermann@suse.de

Using drmm_mode_config_init() sets up managed release of modesetting
resources. The existing modesetting's finalizer is empty, so remove it.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-14-tzimmermann@suse.de

Struct ast_crtc has been cleaned up and it's now a wrapper around the
DRM CRTC structure struct drm_crtc. This patch converts the driver to
struct drm_crtc and removes struct ast_crtc.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-13-tzimmermann@suse.de

Register a release function to finalize cursors. The _fini() function
gets un-exported from the source file.

The function ast_mode_fini() is now empty and will be removed by a
later patch.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-11-tzimmermann@suse.de

Updating the image in a cursor's HW BO requires a mapping of the BO's
buffer in the kernel's address space. Cursor image updates can happen
frequently and create CPU overhead.

As cursor HW BOs are small and never move, they are now map exactly
once during the initialization and the mapping is used throughout the
driver's lifetime.

This change also removes a possible source of failures from
ast_cursor_show(). As the helper does not establish mappings, it cannot
fail. As a result, the cursor plane's atomic-update helper does not
call any failable interfaces. All failures are detected before trying
to update the cursor plane.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de

As the inverse to ast_cursor_show(), ast_cursor_hide() disables the
HW cursor.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-9-tzimmermann@suse.de

Having a cursor move function is misleading, as it actually enables the
cursor's image for displaying. So rename it to ast_cursor_show(). It's
semantics is to show a cursor at the specified location on the screen.
The displayed cursor is always the image in the cursor front BO.

This change also simplifies struct ast_crtc to being a mere wrapper around
around struct drm_crtc. It will be removed by a later patch.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de

The new helper ast_cursor_page_flip() switches the cursor's front and
back BOs. This simplifies the cursor plane's update helper.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-6-tzimmermann@suse.de

The new helper ast_cursor_blit() updates a cursor's backbuffer HW
BO from a framebuffer structure. The cursor plane's prepare_fb()
function now uses the new interface.

Pinning and mapping of BOs is done automatically by the helper. This
includes the source BO, which was not pinned by the original code in
prepare_fb().
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de

Removes some typecasting.

v2:
	* use to_ast_private() instead of struct drm_device.dev_private
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-3-tzimmermann@suse.de

The cursor manipulation functions are unrelated to modesetting. Move
them into their own file.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-2-tzimmermann@suse.de

All upcasting from struct drm_device to struct ast_private is now
performed via to_ast_private(). Using struct drm_device.dev_private
is deprecated. The ast variable in ast_crtc_helper_atomic_check() is
unused, so removed it.

v2:
	* fix typo in commit message
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-4-tzimmermann@suse.de

The ast driver contains code paths for AST 1180 chips. The chip is not
supported and the rsp code has never been tested. Simplify the driver by
removing the AST 1180 code.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200617080340.29584-2-tzimmermann@suse.de

The ast driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

v2:
	* rebase onto new simple-encoder interface
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200228081828.18463-3-tzimmermann@suse.de

Reading the primary plane's framebuffer from the CRTC's atomic_flush()
function is fragile as the plane state or framebuffer can be NULL.
Instead, we let the plane's atomic_check() store the framebuffer format
in the CRTC state. The CRTC always receives the framebuffer format that
is currently programmed, or NULL if no mode has been set yet.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-8-tzimmermann@suse.de

After looking up VBIOS mode information in CRTC's atomic_check(), we
can reuse it in atomic_flush(). No need for a second look-up.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-7-tzimmermann@suse.de

AST-specific CRTC state can be placed in the new struct ast_crtc_state.
The atomic check functions of the CRTC and the primary plane will store
the VBIOS mode info and the framebuffer format here. The CRTC will consume
these during atomic_flush().
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191202111557.15176-6-tzimmermann@suse.de

The cursor plane uses an internal format of ARGB4444. To userspace, we
announce ARGB8888 and do the transformation internally.

v2:
	* don't set plane call-back functions to NULL explicitly
	* define plane format array in global scope
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de

Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.

v2:
	* don't set plane call-back functions to NULL explicitly
	* define plane format array in global scope
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de

The ast driver has switched to struct drm_vram_gem_object a while ago.
This patch removes a function and forward declaration that were forgotten
before.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-2-tzimmermann@suse.de

By putting cursor BOs at the high end of the video memory, we can avoid
memory fragmentation. Starting at the low end, contiguous video memory is
available for framebuffers.

The patch also simplifies the buffer swapping by splitting
struct ast_private.cursor_cache BO into two separate boffer objects. Cursor
images alternate between these buffers instead of offsets within cursor_cache.

v3:
	* fixes space-before-tab error near AST_HWC_SIGNATURE_CHECKSUM
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190927090309.10254-6-tzimmermann@suse.de

Drop use of the deprecated drmP.h header file.
While touching the files divide include files in blocks
and sort the include files in the individual blocks.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NEmil Velikov <emil.velikov@collabora.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190630061922.7254-33-sam@ravnborg.org

This patch replaces ast's framebuffer console with DRM's generic
implememtation. All respective code is being removed from the driver.

The console is set up with a shadow buffer. The actual buffer object is
not permanently pinned in video ram, but just another buffer object that
the driver moves in and out of vram as necessary. The driver's function
ast_crtc_do_set_base() used to contain special handling for the framebuffer
console. With the new generic framebuffer, the driver does not need this
code an longer.

v2:
	* use drm_fb_helper_set_suspend_unlocked() in ast_drm_{thaw,freeze}()
	* dirty function no longer required
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/315835/

The ast driver's struct ast_framebuffer is a buffer object with GEM
interface. There are already GEM framebuffer helpers that implement
the same functionality. Convert ast to these.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627173410.8300-1-tzimmermann@suse.de

The ast driver's data structures store unused or uncecessary cursor
state. Most of the cursor state is already stored elsewhere and can
be retrieved when necessary. Remove the obsolete fields and adapt
users accordingly.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de

The AST driver establishes several memory mappings for frame buffers
and cursors. This patch converts the driver to use the equivalent
drm_gem_vram_kmap() functions. It removes the dependencies on TTM
and cleans up the code.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-12-tzimmermann@suse.deSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

The data structure |struct drm_vram_mm| and its helpers replace ast's
TTM-based memory manager. It's the same implementation; except for the
type names.

v4:
	* don't select DRM_TTM or DRM_VRAM_MM_HELPER
v3:
	* use drm_gem_vram_mm_funcs
	* convert driver to drm_device-based instance
v2:
	* implement ast_mmap() with drm_vram_mm_mmap()
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-11-tzimmermann@suse.deSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

The data structure |struct drm_gem_vram_object| and its helpers replace
|struct ast_bo|. It's the same implementation; except for the type names.

v4:
	* cleanups from checkpatch.pl
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20190508082630.15116-10-tzimmermann@suse.deSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Should not result in any changes.

v2: Rebase
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-6-daniel.vetter@ffwll.ch

Most TTM drivers define the constant DRM_FILE_PAGE_OFFSET of the same
value. The only exception is vboxvideo, which is being converted to the
new offset by this patch. Unifying the constants in a single place
simplifies the driver code.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure that the global BO state is always correctly initialized.

This allows removing all the device code to initialize it.

v2: fix up vbox (Alex)
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As the name says we only need one global instance of ttm_mem_global.

Drop all the driver initialization and just use a single exported
instance which is initialized during BO global initialization.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-7-peda@axentia.se

The ast driver has a code to load the DP501 firmware, but it's never
used.  This patch implements its actual usage by requesting the
firmware on demand, and release the firmware at exit as well.

Also the path contains a few cleanups and makes relevant functions
static.
Signed-off-by: NEgbert Eich <eich@suse.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add detection and mode setting updates for AST2500 generation chip,
code originally from Aspeed and slightly reworked for coding style
mostly by Ben. This doesn't contain the BMC DRAM POST code which
is in a separate patch.
Signed-off-by: NY.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NDave Airlie <airlied@redhat.com>

And fix some comment alignment & space/tabs while at it
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NDave Airlie <airlied@redhat.com>