Everyone agrees we should do this,
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to take the connection mutex around the link status
check for non-MST case, but also around the MST link training
on short HPDs.

I suspect we actually should have a dpcd lock in the future as
well, that just lock the local copies of dpcd and flags stored
from that.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This renames all drm-context helpers to drm_legacy_*() and moves the
internal definitions into the new drm_legacy.h header. This header is
local to DRM-core and drivers shouldn't access it.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

HDMI spec requires a valid max_tmds_clock from edid for hdmi
deep color modes. If a sink violates this, disable deep color.

Also add a hint to user about the deep_color module parameter if
deep color is disabled due to that.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For each minor we allocate a sysfs device as minor->kdev. Currently, this
is allocated and registered in drm_minor_register(). This makes it
impossible to add sysfs-attributes to the device before it is registered.
Therefore, they are not added atomically, nor can we move device_add()
*after* ->load() is called.

This patch makes minor->kdev available early, but only adds the device
during minor-registration. Note that the registration is still called
before ->load() as debugfs needs to be split, too. This will be fixed in
follow-ups.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

Instead of allocating the minor-index during registration, we now do this
during allocation. This way, debug-messages between minor-allocation and
minor-registration will now use the correct minor instead of 0. Same is
done for unregistration vs. free, so debug-messages between
device-shutdown and device-destruction show proper indices.

Even though minor-indices are allocated early, we don't enable minor
lookup early. Instead, we keep the entry set to NULL and replace it during
registration / unregistration. This way, the index is allocated but lookup
only works if registered.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

All that is left in drm_drv.c is ioctl management. Merge it into
drm_ioctl.c so we have all ioctl management in one file (and the name is
much more fitting).

Maybe we should now rename drm_stub.c to drm_drv.c again?
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

Most of the new DRM management functions are nowadays in drm_stub.c. By
moving the core module initialization to drm_stub.c we can make several
global variables static and keep the stub-open helper local.

The core files now look like this:
  drm_stub.c: Core management
   drm_drv.c: Ioctl dispatcher
 drm_ioctl.c: Actual ioctl backends
  drm_fops.c: Char-dev file-operations

A follow-up patch will move what is left from drm_drv.c into drm_ioctl.c.
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

If an active DRM-Master closes its device, we deauthenticate all clients
on that master. However, if an inactive DRM-Master closes its device, we
do nothing. This is quite inconsistent and breaks several scenarios:

 1) If this was used as security mechanism, it fails horribly if a master
    closes a device while VT switched away. Furthermore, none of the few
    drivers using ->master_*() callbacks seems to require it, anyway.

 2) If you spawn weston (or any other non-UMS compositor) in background
    while another compositor is active, both will get assigned to the
    same "drm_master" object. If the foreground compositor now exits, all
    clients of both the foreground AND background compositor will be
    de-authenticated leading to unexpected behavior.

Stop this non-sense and keep clients authenticated. We don't do this when
dropping DRM-Master (i.e., switching VTs) so don't do it on active-close
either!
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

The drm_file->is_master field is redundant as it's equivalent to:
    drm_file->master && drm_file->master == drm_file->minor->master

1) "=>"
  Whenever we set drm_file->is_master, we also set:
      drm_file->minor->master = drm_file->master;

  Whenever we clear drm_file->is_master, we also call:
      drm_master_put(&drm_file->minor->master);
  which implicitly clears it to NULL.

2) "<="
  minor->master cannot be set if it is non-NULL. Therefore, it stays as
  is unless a file drops it.

  If minor->master is NULL, it is only set by places that also adjust
  drm_file->is_master.

Therefore, we can safely drop is_master and replace it by an inline helper
that matches:
    drm_file->master && drm_file->master == drm_file->minor->master
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

The ctxbitmap code is only used by legacy drivers so lets try to keep it
as separated as possible. Furthermore, the locking is non-obvious and
kinda weird with ctxlist_mutex *and* struct_mutex. Keeping all ctxbitmap
access in one file is much easier to review and makes drm_release() more
readable.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>

Skip the "manual" pageflip completion checks via polling and
guessing in the vblank handler radeon_crtc_handle_vblank() on
asics which are known to reliably support hw pageflip completion
irqs. Those pflip irqs are a more reliable and race-free method
of handling pageflip completion detection, whereas the "classic"
polling method has some small races in combination with dpm on,
and with the reworked pageflip implementation since Linux 3.16.

On old asics without pflip irqs, the classic method is used.

On asics with known good pflip irqs, only pflip irqs are used
by default, but a new module parameter "use_pflipirqs" allows to
override this in case we encounter asics in the wild with
unreliable or faulty pflip irqs. A module parameter of 0 allows
to use the classic method only in such a case. A parameter of 1
allows to use both classic method and pflip irqs as additional
band-aid to avoid some small races which could happen with the
classic method alone. The setting 1 gives Linux 3.16 behaviour.

Hw pflip irqs are available since R600.

Tested on DCE-4, AMD Cedar - FirePro 2270.

v2:  agd5f: only enable pflip interrupts on DCE4+ as they are not
reliable on older asics.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Adjust the previous tweak for hawaii to return 3 if the new firmware is used.
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Older firmware didn't support the new nop packet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>

Return 2 so we can be sure the kernel has the necessary
changes for acceleration to work.

Note: This patch depends on these two commits:
 - drm/radeon: fix cut and paste issue for hawaii.
 - drm/radeon: use packet2 for nop on hawaii with old firmware
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>
Cc: stable@vger.kernel.org

Older firmware didn't support the new nop packet.

v2 (Andreas Boll):
 - Drop usage of packet3 for new firmware
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>
Cc: stable@vger.kernel.org

That should allow us to allocate bigger BOs.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the decision what to use into the common VM code.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This closes a small window where the GPU might have accessed freed up memory.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To be consistent with radeon_bo_unref, needed in the following patch.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's causing lockdep warnings and why should
we access the memory that is freed up?
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: rebase on vm_size scale change. Adjust vm_size default to 8,
    Better handle the default and smaller values.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Let's try to fix bugs related to this instead of just disabling it.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Scales much better than scanning the address range linearly.

v2: store pfn instead of address
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Won't work anyway, instead WARN_ON if the VA list isn't
empty when we free the BO.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't wait for the BO to be used again, just
update the PT on the next VM use.

v2: remove stray semicolon.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch depends on:
e0792981
(drm/radeon/dpm: fix typo in vddci setup for eg/btc)

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=73053
https://bugzilla.kernel.org/show_bug.cgi?id=68571Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch depends on:
b0880e87
(drm/radeon/dpm: fix vddci setup typo on cayman)

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69723Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The HDP cache only applies to CPU access to VRAM.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some hawaii cards use a different method to fetch the
voltage info from the vbios.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=74250Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some hawaii boards use a different method for fetching the
voltage information from the vbios.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This ensures the GPU sees all previous CPU writes to VRAM, which makes it
safe:

* For userspace to stream data from CPU to GPU via VRAM instead of GTT
* For IBs to be stored in VRAM instead of GTT
* For ring buffers to be stored in VRAM instead of GTT, if the HPD flush
  is performed via MMIO
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And clean up the function comment a little.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Both on their own are complex enough.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to unblank the display when resuming the MC.  No
functional change as this code path is not currently
hit.  We always disable the displays entirely rather
than just blanking them.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Seems to make VM flushes more stable on SI and CIK.

v2: only use the PFP on the GFX ring on CIK
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For symmetry with other *_set_wptr hooks.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PCI GART doesn't support unsnooped access. AGP GART already uses
write-combined CPU mappings.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>