Use do_div() instead.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Like DIV and IDIV.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use the new byte/word dual opcode decode.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Many x86 instructions come in byte and word variants distinguished with bit
0 of the opcode.  Add macros to aid in defining them.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

SrcMemFAddr is not defined with the modrm operand designating a register
instead of a memory address.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

x86_emulate_insn() will return 1 if instruction can be restarted
without re-entering a guest.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

As suggested by Christian, we should expose headers to user space with
information that might be valuable there. The s390 virtio interface is
one of those cases. It defines an ABI between hypervisor and guest, so
it should be exposed to user space.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The one big missing feature in s390-virtio was hotplugging. This is no more.
This patch implements hotplug add support, so you can on the fly add new devices
in the guest.

Keep in mind that this needs a patch for qemu to actually leverage the
functionality.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currenty the ext_param field only distinguishes between "config change" and
"vring interrupt". We can do a lot more with it though, so let's enable a
full byte of possible values and constants to #defines while at it.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Combine guest pte read between guest pte check in the fetch path and pte prefetch
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Support prefetch ptes when intercept guest #PF, avoid to #PF by later
access

If we meet any failure in the prefetch path, we will exit it and
not try other ptes to avoid become heavy path
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce this function to get consecutive gfn's pages, it can reduce
gup's overload, used by later patch
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic
context, the later patch will use it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This function is used by KVM to pin process's page in the atomic context.

Define the 'weak' function to avoid other architecture not support it
Acked-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Basic informational document about x86 timekeeping and how KVM
is affected.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Kernel time, which advances in discrete steps may progress much slower
than TSC.  As a result, when kvmclock is adjusted to a new base, the
apparent time to the guest, which runs at a much higher, nsec scaled
rate based on the current TSC, may have already been observed to have
a larger value (kernel_ns + scaled tsc) than the value to which we are
setting it (kernel_ns + 0).

We must instead compute the clock as potentially observed by the guest
for kernel_ns to make sure it does not go backwards.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The scale_delta function for shift / multiply with 31-bit
precision moves to a common header so it can be used by both
kernel and kvm module.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If there are active VCPUs which are marked as belonging to
a particular hardware CPU, request a clock sync for them when
enabling hardware; the TSC could be desynchronized on a newly
arriving CPU, and we need to recompute guests system time
relative to boot after a suspend event.

This covers both cases.

Note that it is acceptable to take the spinlock, as either
no other tasks will be running and no locks held (BSP after
resume), or other tasks will be guaranteed to drop the lock
relatively quickly (AP on CPU_STARTING).

Noting we now get clock synchronization requests for VCPUs
which are starting up (or restarting), it is tempting to
attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers
at this time, however it is not correct to do so; they are
required for systems with non-constant TSC as the frequency
may not be known immediately after the processor has started
until the cpufreq driver has had a chance to run and query
the chipset.

Updated: implement better locking semantics for hardware_enable

Removed the hack of dropping and retaking the lock by adding the
semantic that we always hold kvm_lock when hardware_enable is
called.  The one place that doesn't need to worry about it is
resume, as resuming a frozen CPU, the spinlock won't be taken.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Make the match of TSC find TSC writes that are close to each other
instead of perfectly identical; this allows the compensator to also
work in migration / suspend scenarios.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add a helper function to compute the kernel time and convert nanoseconds
back to CPU specific cycles.  Note that these must not be called in preemptible
context, as that would mean the kernel could enter software suspend state,
which would cause non-atomic operation.

Also, convert the KVM_SET_CLOCK / KVM_GET_CLOCK ioctls to use the kernel
time helper, these should be bootbased as well.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When CPUs with unstable TSCs enter deep C-state, TSC may stop
running.  This causes us to require resynchronization.  Since
we can't tell when this may potentially happen, we assume the
worst by forcing re-compensation for it at every point the VCPU
task is descheduled.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Move the TSC control logic from the vendor backends into x86.c
by adding adjust_tsc_offset to x86 ops.  Now all TSC decisions
can be done in one place.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If creating an SMP guest with unstable host TSC, issue a warning
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This simplifies much of the init code; we can now simply always
call tsc_khz_changed, optionally passing it a new value, or letting
it figure out the existing value (while interrupts are disabled, and
thus, by inference from the rule, not raceful against CPU hotplug or
frequency updates, which will issue IPIs to the local CPU to perform
this very same task).
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Attempt to synchronize TSCs which are reset to the same value.  In the
case of a reliable hardware TSC, we can just re-use the same offset, but
on non-reliable hardware, we can get closer by adjusting the offset to
match the elapsed time.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Also, ensure that the storing of the offset and the reading of the TSC
are never preempted by taking a spinlock.  While the lock is overkill
now, it is useful later in this patch series.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Change svm / vmx to be the same internally and write TSC offset
instead of bare TSC in helper functions.  Isolated as a single
patch to contain code movement.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This is used only by the VMX code, and is not done properly;
if the TSC is indeed backwards, it is out of sync, and will
need proper handling in the logic at each and every CPU change.
For now, drop this test during init as misguided.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

commit ad05c88266b4cce1c820928ce8a0fb7690912ba1
(KVM: create aggregate kvm_total_used_mmu_pages value)
introduce percpu counter kvm_total_used_mmu_pages but never
destroy it, this may cause oops when rmmod & modprobe.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NTim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Latest kvm mmu_shrink code rework makes kernel changes kvm->arch.n_used_mmu_pages/
kvm->arch.n_max_mmu_pages at kvm_mmu_free_page/kvm_mmu_alloc_page, which is called
by kvm_mmu_commit_zap_page. So the kvm->arch.n_used_mmu_pages or
kvm_mmu_available_pages(vcpu->kvm) is unchanged after kvm_mmu_prepare_zap_page(),
This caused kvm_mmu_change_mmu_pages/__kvm_mmu_free_some_pages loops forever.
Moving kvm_mmu_commit_zap_page would make the while loop performs as normal.
Reported-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Tested-by: NAvi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>