SERIAL_8250_EXTENDED only serves as a guard for other Kconfig options,
none of which is enabled in shmobile_defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This is used on R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), and
SH-Mobile AG5 (sh73a0).
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

eb451348
(ARM: shmobile: Enable kzm9g board in multiplatform defconfig)
dropped CONFIG_REGULATOR from shmobile_defconfig as it was
generated using a tree where CONFIG_REGULATOR is indirectly
selected by ARCH_SH73A0.

ARCH_SH73A0 is not queued up for v3.20 and thus, baring unforeseen
changes, CONFIG_REGULATOR will not be selected by shmobile_defconfig
in that release. This causes at least SDHI to stop working on
R-Car Gen2 SoCs.
Reported-by: NMagnus Damm <damm+renesas@opensource.se>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms: minimal patch targeted as a fix]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Remove redundant C board code for Lager Multiplatform,
everything is supported via DT these days anyway so it
is fine to rely on the MACHINE_START in setup-r8a7790.c.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
[Remove CONFIG_MACH_LAGER from shmobile_defconfig]
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This allows to restart koelsch on watchdog timeout or manual system
restart request.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

commit 1c9106cb783cd227 ("ARM: shmobile: lager-reference: DTS-only board
support"), dropped the MACH_LAGER Kconfig section, which did "select
MICREL_PHY if SH_ETH". Hence we now have to enable MICREL_PHY explicitly
in shmobile_defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

MTD_BLOOK is needed for accessing to SPI-FLASH
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reported-by: NCao Minh Hiep <cm-hiep@jinso.co.jp>
Reported-by: NBui Duc Phuc ( Fukuda ) <bd-phuc@jinso.co.jp>
Reported-by: NNguyen Xuan Nui <nx-nui@jinso.co.jp>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Current shmobile_defconfig is not created from savedefconfig.
Therefore, next defconfig patch will be unreadable. this patch
tidyup this issue by below command

 > make shmobile_defconfig
 > make savedefconfig
 > cp defconfig ${LINUX}/arch/arm/config/shmobile_defconfig
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
[horms: Resolved conflicts; in particular leaving CONFIG_CPUFREQ_DT enabled]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Having switched over all of the users of CONFIG_PM_RUNTIME to use
CONFIG_PM directly, turn the latter into a user-selectable option
and drop the former entirely from the tree.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NKevin Hilman <khilman@linaro.org>

CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf0719
("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'") and some
defconfigs are still using it instead of the new one.

Use the renamed CONFIG_CPUFREQ_DT generic driver.

Cc: <stable@vger.kernel.org>        # 3.18
Reported-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

This reverts commit 2315f9fc.

Unfortunately enabling RCAR_AUDMAC_PP support this patch breaks dmaengine
support on R-Car Gen2 boards. This should be resolved by driver updates
in v3.20. But v3.19 was too early for this defconfig change.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

AK4642 is well used audio codec on Renesas reference board
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The Koelsch board is supported by the r8a7791 generic DT platform
definition. Remove the board-specific definition along with its board
file.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Support for the r8a7794 was recently added.
Enable it in the shmobile_defconfig to increase build coverage.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable initrd support.
Signed-off-by: NKevin Hilman <khilman@linaro.org>
[horms+renesas@verge.net.au: dropped enabling atag dtb compat]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Based on the DTSes

Notes:
  - MTD_SPI_NOR is a dependency for MTD_M25P80 since commit
    03e296f6 ("mtd: m25p80: use the SPI
    nor framework") and commit e43b2061
    ("mtd: spi-nor: shorten Kconfig naming"),
  - I2C_RIIC was enabled in the old genmai_defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The CONFIG_MACH_GENMAI is scheduled for removal so remove it from
shmobile_defconfig.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: revised changelog for updated commit order]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The R-Car Gen 2 PCIe driver provides PCIe host support for
Renesas R-Car Gen2 platforms. To increase hardware support enable
the driver in the shmobile_defconfig multiplatform configuration.

Cc: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This changes of configuration is multiplatform build only for r8a7790/r8a7791.
Signed-off-by: NGaku Inami <gaku.inami.xw@bp.renesas.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Add marzen to shmobile defconfig now that it supports multiplatform
Also enable SH_HSPI which is used by marzen.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The USB [EO]HCI HCD drivers provide USB host support for Renesas
R-Car Gen2 platforms. To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Both r8a7790 and r8a7791 have multiple on-chip VSP1 devices, so
enable the VSP1 driver by default in the shmobile_defconfig.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Many mach-shmobile hardware platforms include support for more
than 1GiB of RAM. Enable HIGHMEM by default to allow use of
larger amounts of memory.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The renesas_usbhs driver provides USB gadget support for most Renesas
platforms. To increase hardware support enable the driver in the
shmobile_defconfig multiplatform configuration.
Signed-off-by: NUlrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The Koelsch board includes an at24-compatible EEPROM hooked up via I2C.
To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Many SoCs include I2C controller instances compatible with
the i2c-shmobile.c driver. To increase hardware support enable
the driver in the shmobile_defconfig multiplatform configuration.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This is intended to be a base for a defconfig to cover all
shmobile multiplatform boards. It currently includes configuration
for the following boards:

* KZM9D
* Lager
* Koelsch
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NMagnus Damm <damm@opensource.se>

This enables support for the Spansion s25fl512s SPI FLASH on QSPI.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: NMagnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: resolved conflict]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

DEVTMPFS is needed for udev
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
[horms+renesas@verge.net.au: resolved trivial conflict]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This enables R-Car SATA and SCSI disk in lager_defconfig.
Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This enables R-Car VIN SoC camera along with ADV7180 decoder,
which can be found on Lager board, to lager_defconfig.
Signed-off-by: NValentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>