It turns out I had an old 2-button Logitech mouse that responds
to Logitech's queries with model of 1.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The ATI Remote Wonder II can be configured with one of 16 unique logical
channels. Allowing up to 16 remotes to be used independently within
range of each other. This change adds functionality to configure the
receiver and filter the input data to respond or exclude remotes
configured with different logical channels.
Signed-off-by: NPeter Stokes <linux@dadeos.freeserve.co.uk>
Acked-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also fix URB leak in gtco_probe error path, formatting fixes.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

As the number of keymaps increases and is very unlikely to
reduce, this patch helps to reduce memory consumption by
declaring all keymaps as __initdata and copying right keymap
during DMI detection. On x86 this make the module size at
runtime going from 10616 to 9428: a bit more than 1kb saved.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It turns out that the keymaps in the wistron driver are almost the
same, the main difference being some keys which may not exist and
leds which might not be present. Therefore it's possible to write
a generic keymap which would allow the use of an unknown keyboard
with little drawbacks. The user can select it specifying the parameter
"keymap=generic".
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Acerhk supports already a lot of laptops. Lets import its database so
that everyone can benefit of the work of Olaf Tauber. Only the "tm_new"
laptops were imported. "tm_old" laptops could be possible but requires
more testing and probably only few laptops are still alive. "dritek"
laptops should probably be imported into a different driver. Also compress
the keymaps by fitting each entry on an int. Most of the dmi matching was
written based on google searches, so it's rather prone to errors. That's
why I'm asking people to confirm it works.

Support to generate switch input events was added as some laptops indicate
lid open/close through this interface.

This adds the following hardware:
Acer TravelMate 370
Acer TravelMate 380
Acer TravelMate C300
Acer TravelMate C100
Acer TravelMate C110
Acer TravelMate 250
Acer TravelMate 350
Acer TravelMate 620
Acer TravelMate 630
Acer TravelMate 220
Acer TravelMate 230
Acer TravelMate 260
Acer TravelMate 280
Acer TravelMate 360
Acer TravelMate 2100
Acer TravelMate 2410
Acer Aspire 1500
Acer Aspire 1600
Acer Aspire 3020
Acer Aspire 5020
Medion MD 2900
Medion MD 40100
Medion MD 95400
Medion MD 96500
Fujitsu Siemens Amilo 7820
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There are mice reporting to logitech's queries with model
of 0. Do not claim that these are Logitech mice.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Disable both keyboard and auxiliary interfaces before switching
to legacy mode to prevent atkbd from getting "empty" interrupts.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Pete Zaitcev reports that with his touchpad, if he lifts the finger
and places it elsewhere, the pointer sometimes warps dramatically.
This happens because we don't store coordinates unless we detect a
touch so sometimes we have stale coordinates in queue (from where
the finger left the pad) and averaging makes cursor to jump across
the screen. The solution is to always store the latest coordinates.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Delete the never-compiled source file drivers/input/power.c, and
remove its entry from the corresponding Makefile, as there is no
Kconfig file that refers to the config option INPUT_POWER
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use printk_ratelimit() to protect ourselves from buggy drivers or
devices endlessly generating invalid events.

Suggested by Andrew Morton.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Encode synaptics model in psmouse->model so it will be
exported via sysfs as input_dev->id.version and become
visible for applications.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Using usb_unlink_urb can cause iforce_open to fail when called
soon after iforce_release. Also updated my email address and
replaced calls to printk() by dbg(), warn(), info(), err()...
Signed-off-by: NJohann Deneux <johann.deneux@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The naming convention in input handlers was very confusing -
client stuctures were called lists, regular lists were also
called lists making anyone looking at the code go mad.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

 - consolidate code for binding handlers to a device
 - return error codes from handlers connect() methods back to input
   core and log failures
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports so disabling MUX mode is safe.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The following bug happens when insmoding hp_sdc_mlc.ko:

    HP SDC MLC: Registering the System Domain Controller's HIL MLC.
    BUG: rwlock recursion on CPU#0, hotplug/1814, 00854734
    Backtrace:
     [<10267560>] _raw_write_lock+0x50/0x88
     [<10104008>] _write_lock_irqsave+0x14/0x24
     [<008537d4>] hp_sdc_mlc_out+0x38/0x25c [hp_sdc_mlc]
     [<0084ebd8>] hilse_donode+0x308/0x470 [hil_mlc]
     [<0084ed80>] hil_mlcs_process+0x40/0x6c [hil_mlc]
     [<10130f80>] tasklet_action+0x78/0xb8
     [<10130cec>] __do_softirq+0x60/0xcc
     [<1010428c>] __lock_text_end+0x38/0x48
     [<10108348>] do_cpu_irq_mask+0xf0/0x11c
     [<1010b068>] intr_return+0x0/0xc
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NRodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When using MS protocol the driver should wait for a byte with
bit 6 set before assuming that it sees beginning of a data packet.
This should allow driver better cope with lost bytes and prevent
spurious left/right button events when serial communication is
disturbed by a CPU-hungry real-time process.

Also fix some formatting.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now that sysfs attributes that were marked for deletion can't access
their devices we do not need to set name, phys and uniq to NULL.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Allow drivers to implement their own get and set keycode methods. This
will allow drivers to change their keymaps without allocating huge
tables covering entire range of possible scancodes.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Allow ALPS, LOGIPS2PP, LIFEBOOK, TRACKPOINT and TOUCHKIT protocol
extensions of psmouse to be disabled during compilation. This will
allow users save some memory when they are sure that they will only
use a certain type of mice.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Rely on device core to create attribute groups for input devices
instead of open-coding it.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add support for Acer TravelMate 610 to wistron_btns. All special keys
are detected, but the 2 leds are not handled (yet).
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Forcing stream mode after reset confuses some devices (reported
by Andrea Arcangeli) so let's take it out - spec says that after
reset mouse should already be in stream mode.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

 - mark some structures const or __read_mostly
 - hilkbd.c: fix uninitialized spinlock in HIL keyboard driver
 - hil_mlc.c: use USEC_PER_SEC instead of 1000000
 - hp_sdc: bugfix for request_irq()/free_irq() parameters, this prevented
           multiple load/unload cycles as module
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The ads7843 support has now become almost trivial since the last
rework.
Signed-off-by: NNicolas Ferre <nicolas.ferre@rfo.atmel.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Tested on Cobalt Qube2.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Based on the touchkit USB and lifebook PS/2 touchscreen driver.

The egalax touchsreen controller (PS/2 or USB version) is used in this 7"
device: http://www.cartft.com/catalog/il/449Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

They have been marked as __obsolete_setup() for several years,
it is time for them to go.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Do not call release_region() if the code has been compiled
without CONFIG_HP300 support.
Signed-off-by: NCyrill V. Gorcunov <gorcunov@gmail.com>
Acked-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

By default threat devices as joysticks with constant force-feedback
effect.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NJohann Deneux <johann.deneux@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This adds support for at least SA1100 and S3C24xx CPUs.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now that sysfs attributes return -ENODEV once driver requests their
removal we do not need to handle scenario when data is deleted from
under our feet and can simplify the code.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Let serio subsystem take care of suspending the ports; concentrate
on suspending/resuming the controller itself.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>