The free space cache uses only one page for crcs right now,
which means we can't have a cache file bigger than the
crcs we can fit in the first page.  This adds a check to
enforce that restriction.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If there are duplicate entries in the free space cache, discard the entire cache
and load it the old fashioned way.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

parameter tree root it's not used since commit
5f39d397 ("Btrfs: Create extent_buffer
interface for large blocksizes")
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>

If our space cache is wrong, we do the right thing and free up everything that
we loaded, however we don't reset the total_bitmaps counter or the thresholds or
anything.  So in btrfs_remove_free_space_cache make sure to call free_bitmap()
if it's a bitmap, this will keep us from panicing when we check to make sure we
don't have too many bitmaps.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Since commit dc89e982, we've changed
to use a specific slab for alocation of free_space items.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is similar to block group caching.

We dedicate a special inode in fs tree to save free ino cache.

At the very first time we create/delete a file after mount, the free ino
cache will be loaded from disk into memory. When the fs tree is commited,
the cache will be written back to disk.

To keep compatibility, we check the root generation against the generation
of the special inode when loading the cache, so the loading will fail
if the btrfs filesystem was mounted in an older kernel before.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Extract out block group specific code from lookup_free_space_inode(),
create_free_space_inode(), load_free_space_cache() and
btrfs_write_out_cache(), so the code can be used to read/write
free ino cache.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Currently btrfs stores the highest objectid of the fs tree, and it always
returns (highest+1) inode number when we create a file, so inode numbers
won't be reclaimed when we delete files, so we'll run out of inode numbers
as we keep create/delete files in 32bits machines.

This fixes it, and it works similarly to how we cache free space in block
cgroups.

We start a kernel thread to read the file tree. By scanning inode items,
we know which chunks of inode numbers are free, and we cache them in
an rb-tree.

Because we are searching the commit root, we have to carefully handle the
cross-transaction case.

The rb-tree is a hybrid extent+bitmap tree, so if we have too many small
chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram
of extents, and a bitmap will be used if we exceed this threshold. The
extents threshold is adjusted in runtime.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

So we can re-use the code to cache free inode numbers.

The change is quite straightforward. Two new structures are introduced.

- struct btrfs_free_space_ctl

  We move those variables that are used for caching free space from
  struct btrfs_block_group_cache to this new struct.

- struct btrfs_free_space_op

  We do block group specific work (e.g. calculation of extents threshold)
  through functions registered in this struct.

And then we can remove references to struct btrfs_block_group_cache.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

No functional change.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

We've already recorded the value in block_group->frees_space.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

The free space caching code was recently reworked to
cache all the pages it needed instead of using find_get_page everywhere.

One loop was missed though, so it ended up leaking pages.  This fixes
it to use our page array instead of find_get_page.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Currently we don't handle running out of space in the cache, so to fix this we
keep track of how far in the cache we are.  Then we only dirty the pages if we
successfully modify all of them, otherwise if we have an error or run out of
space we can just drop them and not worry about the vm writing them out.
Thanks,

Tested-by Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: NJosef Bacik <josef@redhat.com>

I noticed a huge problem with the free space cache that was presenting
as an early ENOSPC.  Turns out when writing the free space cache out I
forgot to take into account pinned extents and more importantly
clusters.  This would result in us leaking free space everytime we
unmounted the filesystem and remounted it.

I fix this by making sure to check and see if the current block group
has a cluster and writing out any entries that are in the cluster to the
cache, as well as writing any pinned extents we currently have to the
cache since those will be available for us to use the next time the fs
mounts.

This patch also adds a check to the end of load_free_space_cache to make
sure we got the right amount of free space cache, and if not make sure
to clear the cache and re-cache the old fashioned way.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

the object id of the space cache inode's key is allocated from the relative
root, just like the regular file. So we can't identify space cache inode by
checking the object id of the inode's key, and we have to clear __GFP_FS flag
at the time we look up the space cache inode.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We take an free extent out from allocator, trim it, then put it back,
but before we trim the block group, we should make sure the block group is
cached, so plus a little change to make cache_block_group() run without a
transaction.
Signed-off-by: NLi Dongyang <lidongyang@novell.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the free space cluster refilling code a little easier to
understand, and fixes some things with the bitmap part of it.  Currently we
either want to refill a cluster with

1) All normal extent entries (those without bitmaps)
2) A bitmap entry with enough space

The current code has this ugly jump around logic that will first try and fill up
the cluster with extent entries and then if it can't do that it will try and
find a bitmap to use.  So instead split this out into two functions, one that
tries to find only normal entries, and one that tries to find bitmaps.

This also fixes a suboptimal thing we would do with bitmaps.  If we used a
bitmap we would just tell the cluster that we were pointing at a bitmap and it
would do the tree search in the block group for that entry every time we tried
to make an allocation.  Instead of doing that now we just add it to the clusters
group.

I tested this with my ENOSPC tests and xfstests and it survived.
Signed-off-by: NJosef Bacik <josef@redhat.com>

We have been creating bitmaps for small extents unconditionally forever.  This
was great when testing to make sure the bitmap stuff was working, but is
overkill normally.  So instead of always adding small chunks of free space to
bitmaps, only start doing it if we go past half of our extent threshold.  This
will keeps us from creating a bitmap for just one small free extent at the front
of the block group, and will make the allocator a little faster as a result.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We do all this fun stuff with min_bytes, but either don't use it in the case of
just normal extents, or use it completely wrong in the case of bitmaps.  So fix
this for both cases

1) In the extent case, stop looking for space with window_free >= min_bytes
instead of bytes + empty_size.

2) In the bitmap case, we were looking for streches of free space that was at
least min_bytes in size, which was not right at all.  So instead search for
stretches of free space that are at least bytes in size (this will make a
difference when we have > page size blocks) and then only search for min_bytes
amount of free space.

Thanks,
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <josef@redhat.com>

The free space cluster stuff is heavy duty, so there is no sense in going
through the entire song and dance if there isn't enough space in the block group
to begin with.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Since we alloc/free free space entries a whole lot, lets use a slab to keep
track of them.  This makes some of my tests slightly faster.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

When we're cleaning up the tree log we need to be able to remove free space from
the block group.  The problem is if that free space spans bitmaps we would not
find the space since we're looking for too many bytes.  So make sure the amount
of bytes we search for is limited to either the number of bytes we want, or the
number of bytes left in the bitmap.  This was tested by a user who was hitting
the BUG() after search_bitmap.  With this patch he can now mount his fs.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

After returing extents from a cluster to the block group, some
extents in the block group may be mergeable.
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

When adding a new extent, we'll firstly see if we can merge
this extent to the left or/and right extent. Extract this as
a helper try_merge_free_space().

As a side effect, we fix a small bug that if the new extent
has non-bitmap left entry but is unmergeble, we'll directly
link the extent without trying to drop it into bitmap.

This also prepares for the next patch.
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

When allocating extent entry from a cluster, we should update
the free_space and free_extents fields of the block group.
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

If there's no more free space in a bitmap, we should free it.
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Remove some duplicated code.

This prepares for the next patch.
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

If a block group is smaller than 1GB, the extent entry threadhold
calculation will always set the threshold to 0.

So as free space gets fragmented, btrfs will switch to use bitmap
to manage free space, but then will never switch back to extents
due to this bug.
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Currently if the space cache inode generation number doesn't match the
generation number in the space cache header we will just fail to load the space
cache, but we won't mark the space cache as an error, so we'll keep getting that
error each time somebody tries to cache that block group until we actually clear
the thing.  Fix this by marking the space cache as having an error so we only
get the message once.  This patch also makes it so that we don't try and setup
space cache for a block group that isn't cached, since we won't be able to write
it out anyway.  None of these problems are actual problems, they are just
annoying and sub-optimal.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

If something goes wrong with the free space cache we need a way to make sure
it's not loaded on mount and that it's cleared for everybody.  When you pass the
clear_cache option it will make it so all block groups are setup to be cleared,
which keeps them from being loaded and then they will be truncated when the
transaction is committed.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

This patch actually loads the free space cache if it exists.  The only thing
that really changes here is that we need to cache the block group if we're going
to remove an extent from it.  Previously we did not do this since the caching
kthread would pick it up.  With the on disk cache we don't have this luxury so
we need to make sure we read the on disk cache in first, and then remove the
extent, that way when the extent is unpinned the free space is added to the
block group.  This has been tested with all sorts of things.
Signed-off-by: NJosef Bacik <josef@redhat.com>

This is a simple bit, just dump the free space cache out to our preallocated
inode when we're writing out dirty block groups.  There are a bunch of changes
in inode.c in order to account for special cases.  Mostly when we're doing the
writeout we're holding trans_mutex, so we need to use the nolock transacation
functions.  Also we can't do asynchronous completions since the async thread
could be blocked on already completed IO waiting for the transaction lock.  This
has been tested with xfstests and btrfs filesystem balance, as well as my ENOSPC
tests.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

In order to save free space cache, we need an inode to hold the data, and we
need a special item to point at the right inode for the right block group.  So
first, create a special item that will point to the right inode, and the number
of extent entries we will have and the number of bitmaps we will have.  We
truncate and pre-allocate space everytime to make sure it's uptodate.

This feature will be turned on as soon as you mount with -o space_cache, however
it is safe to boot into old kernels, they will just generate the cache the old
fashion way.  When you boot back into a newer kernel we will notice that we
modified and not the cache and automatically discard the cache.
Signed-off-by: NJosef Bacik <josef@redhat.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

btrfs inialize rb trees in quite a number of places by settin rb_node =
NULL;  The problem with this is that 17d9ddc7 in the
linux-next tree adds a new field to that struct which needs to be NULL for
the new rbtree library code to work properly.  This patch uses RB_ROOT as
the intializer so all of the relevant fields will be NULL'd.  Without the
patch I get a panic.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch fixes a problem where max_size can be set to 0 even though we
filled the cluster properly.  We set max_size to 0 if we restart the cluster
window, but if the new start entry is big enough to be our new cluster then we
could return with a max_size set to 0, which will mean the next time we try to
allocate from this cluster it will fail.  So set max_extent to the entry's
size.  Tested this on my box and now we actually allocate from the cluster
after we fill it.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There is a slight problem with the extent entry threshold calculation for the
free space cache.  We only adjust the threshold down as we add bitmaps, but
never actually adjust the threshold up as we add bitmaps.  This means we could
fragment the free space so badly that we end up using all bitmaps to describe
the free space, use all the free space which would result in the bitmaps being
freed, but then go to add free space again as we delete things and immediately
add bitmaps since the extent threshold would still be 0.  Now as we free
bitmaps the extent threshold will be ratcheted up to allow more extent entries
to be added.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>