- 18 1月, 2014 1 次提交
-
-
由 stephen hemminger 提交于
Functions only used in one file should be static. Found by running make namespacecheck Compile tested only. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2014 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o MAC learning will be done for SRIOV PF to help program VLAN filters onto adapter. This will help VNIC traffic to flow through without flooding traffic. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 5 次提交
-
-
由 Sucheta Chakraborty 提交于
o Change function name from qlcnic_83xx_register_nic_idc_func to qlcnic_83xx_initialize_nic Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o These operations will be supported only through PFs (SR-IOV and non-SR-IOV). Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Allow driver to collect firmware dump, during a forced firmware dump operation, when auto firmware recovery is disabled. Also, during this operation, driver should not allow reset recovery to be performed. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Use vzalloc() instead of kzalloc() for allocation of bootloader size memory. kzalloc() may fail to allocate the size of bootloader Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o TSS/RSS ring validation does not take into account that either of these ring values can be 0. This patch fixes this validation and would fail set_channel operation if any of these ring value is 0. This regression was added as part of commit id 34e8c406 ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.") Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2013 3 次提交
-
-
由 Himanshu Madhani 提交于
o 83xx and 84xx firmware is capable of multiple Tx queues. This patch will enable multiple Tx queues for 83xx/84xx series adapters. Max number of Tx queues supported will be 8. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Current driver has duplicate code for validating user input for changing Tx/SDS rings using set_channel ethtool interface. This patch removes duplicate code and refactored Tx/SDS ring validation for 82xx/83xx/84xx series adapter. o Refactored code now calculates maximum Tx/Rx ring driver can support based on Default, NPAR and SRIOV PF/VF mode of driver. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Without failing probe, register netdev when device is in FAILED state. o Device will come up with minimum functionality and allow diagnostics and repair of the adapter. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2013 2 次提交
-
-
由 Sucheta Chakraborty 提交于
o Move dcb specific function definitions to dcb files. o Move dcb specific variables to qlcnic_dcb structure. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
o Allow collecting the firmware dump of halted firmware when auto recovery is disabled. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2013 4 次提交
-
-
由 Sony Chacko 提交于
There is an embedded switch per physical port on the adapter. Add support for enabling and disabling the embedded switch on per port basis. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
o Removed unused and unnecessary members from qlc_83xx_fw_info structure. o Made fw_info member of qlcnic_hardware_context as a pointer to qlc_83xx_fw_info structure. o Added a member fw_file_name to qlc_83xx_fw_info structure which will hold the name of firmware image file name. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Remove inline keyword from function prototypes wherever it is not appropriate. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2013 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o Query adapter DCB capabilities and populate local data structures with relevant information. o Add QLCNIC_DCB to Kconfig for enabling/disabling DCB. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 8月, 2013 1 次提交
-
-
由 Himanshu Madhani 提交于
o using ethtool {set|get}_channel option, user can change number of Tx queues for 82xx Series adapter. o updated ethtool -S <ethX> option to display stats from each Tx queue. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 8月, 2013 1 次提交
-
-
由 Pratik Pujar 提交于
o Use appropriate firmware image file name based on device IDs. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2013 2 次提交
-
-
由 Manish Chopra 提交于
o Load firmware from file before setting up interrupts. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
Driver was issuing set driver version command through all functions in the adapter. Fix the driver to issue set driver version once per adapter, through function 0. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 8月, 2013 1 次提交
-
-
由 Himanshu Madhani 提交于
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2013 2 次提交
-
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Driver firmware mailbox interface was operating in polling mode because of limitations with the earlier versions of 83xx adapter firmware. These issues are resolved and we are implementing interrupt based mailbox mechanism. o Data structures and API's for interrupt mode mailbox mechanism. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2013 1 次提交
-
-
由 Jitendra Kalsaria 提交于
Work function needs to be initialized before we participate in inter device communication (IDC). Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2013 3 次提交
-
-
由 Rajesh Borundia 提交于
o Implement shutdown and resume handlers for 83xx. o Refactor 82xx shutdown and resume handlers. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Issue 'set driver version' during driver load and after reset recovery to notify the driver version to the firmware. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
qlcnic_alloc_mbx_args() may fail due to failure in memory allocation. This patch checks for failure of qlcnic_alloc_mbx_args() to avoid potential invalid memory access. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2013 1 次提交
-
-
由 Sony Chacko 提交于
Provide diagnostics routines enough time to unwind before proceeding with reset recovery. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2013 1 次提交
-
-
由 Sony Chacko 提交于
Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2013 1 次提交
-
-
由 Sony Chacko 提交于
o When transmit timeout happens, recovery attempt should start with adapter soft reset. If soft reset fails to resume traffic, firmware dump will be collected and driver will perform a hard reset of the adapter. Reset recovery on 83xx was failing after a hard reset. This patch fixes that issue. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2013 1 次提交
-
-
由 Manish Chopra 提交于
o Disabling PAUSE requires access to EPORT registers, which may cause a wedge, if EPORT is in reset. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2013 1 次提交
-
-
由 Rajesh Borundia 提交于
o Implement recovery mechanism for VF to recover from adapter resets. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2013 2 次提交
-
-
由 Rajesh Borundia 提交于
o Add PCI device entry for VF. o Add HW operations for VF. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add QLCNIC_SRIOV to Kconfig. o Provide PCI sysfs hooks to enable and disable SR-IOV. o Allow enabling only when CONFIG_QLCNIC_SRIOV is defined. o qlcnic_sriov_pf.c has all the PF related SR-IOV functionality. o qlcnic_sriov_common.c has VF functionality and SR-IOV functionality which is common between VF and PF. o qlcnic_sriov.h is a common header file for SR-IOV defines. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2013 1 次提交
-
-
由 Shahed Shaikh 提交于
o Split mailbox structure elements on boundary of adapter register size i.e. 32bit. o Shuffle the position of structure elements based on CPU endianness. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 2月, 2013 1 次提交
-
-
由 Manish Chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2013 1 次提交
-
-
由 Himanshu Madhani 提交于
Register for firmware based Inter Driver Communication (IDC) using initialize NIC as the first mailbox command Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2013 2 次提交
-
-
由 Jitendra Kalsaria 提交于
We recently refactored the driver source, this patch will take care of updating copyright date and adding it to newly added files. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-