Added the EQ distortion fix to the dell_m6_core_init.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When changing the sample rate, the CMI8788's master clock output becomes
unstable for a short time.  The AK4396 needs the master clock to do SPI
writes, so writing to an AK4396 control register directly after a sample
rate change will garble the value.  In our case, this leads to the DACs
being misconfigured to I2S sample format, which results in a wrong
output level and horrible distortions on samples louder than -6 dB.

To fix this, we need to wait until the new master clock signal has
become stable before doing SPI writes.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit 3e0e469f.

The patch introduced a wrong detection of other intel Macs with
ALC88* codec because they share the same PCI SSID (but have different
codec subsystem-IDs).  See http://lkml.org/lkml/2008/8/24/143Reported-and-tested-by: NGuillaume Chazarain <guichaz@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Thanks to Felipe Balbi <felipe.balbi@nokia.com> by noticing that if clk_get
to sys_clkout2_src fails, then n810_snd_device is never released.

Add also sys_clkout2_src release into error path, error code return and
release the clocks at exit.
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Xonar DX does not have CD Capture controls, so we have to check that
a control actually exists before muting it.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2x: Version update
  bnx2x: Multi Queue
  bnx2x: NAPI and interrupts enable/disable
  bnx2x: NIC load failure cleanup
  bnx2x: Initialization structure
  bnx2x: HW lock timeout
  bnx2x: Minimize lock time
  bnx2x: Fan failure mechanism on additional design
  bnx2x: Rx work check
  ipv6: sysctl fixes
  ipv4: sysctl fixes
  sctp: add verification checks to SCTP_AUTH_KEY option

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Version update
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The multi queue support is still disabled by default for the bnx2x
(needs some more testing and validation), but there are 2 obvious bug in
it which are fixed in this patch
Signed-off-by: NYitchak Gertner <gertner@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixing the order of enabling and disabling NAPI and the interrupts
Signed-off-by: NYitchak Gertner <gertner@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Load failures were not handled correctly
Signed-off-by: NYitchak Gertner <gertner@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TPA initialization is part of the FW internal memory initialization
and so it is moved to the appropriate function
Signed-off-by: NYitchak Gertner <gertner@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Increasing the lock timeout to 5 seconds instead of 1 second to minimize
the chance of failures due to timeout
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After iSCSI boot, the HW lock should only protect the flag so only the
first function will reset the chip and not then entire chip reset
process
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The A1021G board is also using the fan failure mechanism in the same way
the A1022G board does
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The has Rx work check was wrong: when the FW was at the end of the page,
the driver was already at the beginning of the next page. Since the
check only validated that both driver and FW are pointing to the same
place, it concluded that there is still work to be done. This caused
some serious issues including long latency results on ping-pong test and
lockups while unloading the driver in that condition.
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Braino: net.ipv6 in ipv6 skeleton has no business in rotable
class
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net.ipv4.neigh should be a part of skeleton to avoid ordering problems
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The structure used for SCTP_AUTH_KEY option contains a
length that needs to be verfied to prevent buffer overflow
conditions.  Spoted by Eugene Teo <eteo@redhat.com>.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a regression that was indirectly caused by commit
1184dc2f ("x86: modify Kconfig to allow
up to 4096 cpus").

Allowing 4k CPU's is not practical at this time, because we still have a
number of places that have several 'cpumask_t's on the stack, and a
4k-bit cpumask is 512 bytes of stack-space for each such variable.  This
literally caused functions like 'smp_call_function_mask' to have a 2.5kB
stack frame, and several functions to have 2kB stackframes.

With an 8kB stack total, smashing the stack was simply much too likely.
At least bugzilla entry

	http://bugzilla.kernel.org/show_bug.cgi?id=11342

was due to this.

The earlier commit to not inline load_module() into sys_init_module()
fixed the particular symptoms of this that Alan Brunelle saw in that
bugzilla entry, but the huge stack waste by cpumask_t's was the more
direct cause.

Some day we'll have allocation helpers that allocate large CPU masks
dynamically, but in the meantime we simply cannot allow cpumasks this
large.

Cc: Alan D. Brunelle <Alan.Brunelle@hp.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: fix deadlock

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: add X86_FEATURE_XMM4_2 definitions
  x86: fix cpufreq + sched_clock() regression
  x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3
  x86: do not enable TSC notifier if we don't need it
  x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUs
  x86: fix: make PCI ECS for AMD CPUs hotplug capable
  x86: fix: do not run code in amd_bus.c on non-AMD CPUs

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched_clock: fix cpu_clock()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: fix reference leak in pci_get_dev_by_id()
  PCI: shpchp: Rename duplicate slot name N as N-1, N-2, N-M...
  PCI: pciehp: Rename duplicate slot name N as N-1, N-2, N-M...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ASoC: Fix double free and memory leak in many codec drivers
  ALSA: CA0106 on MSI K8N Diamond PLUS Motherboard

* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: fix userspace ABI breakage
  KVM: MMU: Fix torn shadow pte
  KVM: Use .fixup instead of .text.fixup on __kvm_handle_fault_on_reboot

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: update commentry
  stop_machine: Remove deprecated stop_machine_run
  stop_machine: wean Xen off stop_machine_run
  virtio_balloon: fix towards_target when deflating balloon

'load_module()' is a complex function that contains all the ELF section
logic, and inlining it is utterly insane.  But gcc will do it, simply
because there is only one call-site.  As a result, all the stack space
that is allocated for all the work to load the module will still be
active when we actually call the module init sequence, and the deep call
chain makes stack overflows happen.

And stack overflows are really hard to debug, because they not only
corrupt random pages below the stack, but also corrupt the thread_info
structure that is allocated under the stack.

In this case, Alan Brunelle reported some crazy oopses at bootup, after
loading the processor module that ends up doing complex ACPI stuff and
has quite a deep callchain.  This should fix it, and is the sane thing
to do regardless.

Cc: Alan D. Brunelle <Alan.Brunelle@hp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes 3 issues:

a) it removes the dependency on jiffies, because jiffies are incremented
   by a single CPU, and the tick is not synchronized between CPUs. Therefore
   relying on it to calculate a window to clip whacky TSC values doesn't work
   as it can drift around.

   So instead use [GTOD, GTOD+TICK_NSEC) as the window.

b) __update_sched_clock() did (roughly speaking):

   delta = sched_clock() - scd->tick_raw;
   clock += delta;

   Which gives exponential growth, instead of linear.

c) allows the sched_clock_cpu() value to warp the u64 without breaking.

the results are more reliable sched_clock() deltas:

           before       after   sched_clock

cpu_clock: 15750        51312   51488
cpu_clock: 59719        51052   50947
cpu_clock: 15879        51249   51061
cpu_clock: 1            50933   51198
cpu_clock: 1            50931   51039
cpu_clock: 1            51093   50981
cpu_clock: 1            51043   51040
cpu_clock: 1            50959   50938
cpu_clock: 1            50981   51011
cpu_clock: 1            51364   51212
cpu_clock: 1            51219   51273
cpu_clock: 1            51389   51048
cpu_clock: 1            51285   51611
cpu_clock: 1            50964   51137
cpu_clock: 1            50973   50968
cpu_clock: 1            50967   50972
cpu_clock: 1            58910   58485
cpu_clock: 1            51082   51025
cpu_clock: 1            50957   50958
cpu_clock: 1            50958   50957
cpu_clock: 1006128      51128   50971
cpu_clock: 1            51107   51155
cpu_clock: 1            51371   51081
cpu_clock: 1            51104   51365
cpu_clock: 1            51363   51309
cpu_clock: 1            51107   51160
cpu_clock: 1            51139   51100
cpu_clock: 1            51216   51136
cpu_clock: 1            51207   51215
cpu_clock: 1            51087   51263
cpu_clock: 1            51249   51177
cpu_clock: 1            51519   51412
cpu_clock: 1            51416   51255
cpu_clock: 1            51591   51594
cpu_clock: 1            50966   51374
cpu_clock: 1            50966   50966
cpu_clock: 1            51291   50948
cpu_clock: 1            50973   50867
cpu_clock: 1            50970   50970
cpu_clock: 998306       50970   50971
cpu_clock: 1            50971   50970
cpu_clock: 1            50970   50970
cpu_clock: 1            50971   50971
cpu_clock: 1            50970   50970
cpu_clock: 1            51351   50970
cpu_clock: 1            50970   51352
cpu_clock: 1            50971   50970
cpu_clock: 1            50970   50970
cpu_clock: 1            51321   50971
cpu_clock: 1            50974   51324
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Added Intel processor SSE4.2 feature flag.

No in-tree user at the moment, but makes the tree-merging life easier
for the crypto tree.
Signed-off-by: NAustin Zhang <austin.zhang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The following part of commit 9ef621d3
(KVM: Support mixed endian machines) changed on the size of a struct
that is exported to userspace:

include/linux/kvm.h:

@@ -318,14 +318,14 @@ struct kvm_trace_rec {
 	__u32 vcpu_id;
 	union {
 		struct {
-			__u32 cycle_lo, cycle_hi;
+			__u64 cycle_u64;
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} cycle;
 		struct {
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} nocycle;
 	} u;
-};
+} __attribute__((packed));

Packing a struct was the correct idea, but it packed the wrong struct.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The shadow code assigns a pte directly in one place, which is nonatomic on
i386 can can cause random memory references.  Fix by using an atomic setter.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

vmlinux.lds expects the fixup code to be on a section named .fixup. The
.text.fixup section is not mentioned on vmlinux.lds, and is included on
the resulting vmlinux (just after .text) only because of ld heuristics on
placing orphan sections.

However, placing .text.fixup outside .text breaks the definition of
_etext, making it exclude the .text.fixup contents. That makes .text.fixup
be ignored by the kernel initialization code that needs to know about
section locations, such as the code setting page protection bits.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Everyone should be using stop_machine() now.  The staged API
transition helped life in linux-next.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is the last use of (the deprecated) stop_machine_run in the tree.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Both v and vb->num_pages are u32 and unsigned int respectively.  If v is less
than vb->num_pages (and it is, when deflating the balloon), the result is a
very large 32-bit number.  Since we're returning a s64, instead of getting the
same negative number we desire, we get a very large positive number.

This handles the case where v < vb->num_pages and ensures we get a small,
negative, s64 as the result.

Rusty: please push this for 2.6.27-rc4.  It's probably appropriate for the
stable tree too as it will cause an unexpected OOM when ballooning.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (simplified)

I noticed that my sched_clock() was slow on a number of machine, so I
started looking at cpufreq.

The below seems to fix the problem for me.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Many SoC audio codec drivers have improper freeing of memory in error
paths.

* codec is allocated in the platform device probe function, but is not
  freed there in case of error. Instead it is freed in the i2c device
  probe function's error path. However the success or failure of both
  functions is not linked, so this could result in a double free (if
  the platform device is successfully probed, the i2c device probing
  fails and then the platform driver is unregistered.)

* codec->private_data is allocated in many platform device probe
  functions but not freed in their error paths.

This patch hopefully solves all these problems.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>