- 19 12月, 2014 1 次提交
-
-
由 Jiri Jaburek 提交于
The Arcam rPAC seems to have the same problem - whenever anything (alsamixer, udevd, 3.9+ kernel from 60af3d03, ..) attempts to access mixer / control interface of the card, the firmware "locks up" the entire device, resulting in SNDRV_PCM_IOCTL_HW_PARAMS failed (-5): Input/output error from alsa-lib. Other operating systems can somehow read the mixer (there seems to be playback volume/mute), but any manipulation is ignored by the device (which has hardware volume controls). Cc: <stable@vger.kernel.org> Signed-off-by: NJiri Jaburek <jjaburek@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2014 1 次提交
-
-
由 Damien Zammit 提交于
This patch provides the infrastructure for the Digidesign Mbox 1 to have a mixer control for selecting the clock source. Valid options are Internal and S/PDIF external sync. A non-documented command is sent to the device to enable this feature found by reverse engineering and bus snooping. Signed-off-by: NDamien Zammit <damien@zamaudio.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 2月, 2014 1 次提交
-
-
由 Clemens Ladisch 提交于
When the driver tries to access Function Unit 10, the KEF X300A speakers' firmware apparently locks up, making even PCM streaming impossible. Work around this by ignoring this FU. Cc: <stable@vger.kernel.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 12月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
Plantronics Gamecom 780 headset has a firmware problem, and when the FU 0x09 volume is changed, it results in either too loud or silence except for a very narrow range. This patch provides a workaround, ignoring the node, initialize the volume in a sane value and keep untouched. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65251Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 2月, 2013 1 次提交
-
-
由 Matt Gruskin 提交于
Adds quirks and mixer support for the M-Audio Fast Track C600 USB audio interface. This device is very similar to the C400 - the C600 simply has some more inputs and outputs, so the existing C400 support is extended to support this device as well. Signed-off-by: NMatt Gruskin <matthew.gruskin@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2013 1 次提交
-
-
由 Eldad Zack 提交于
Add names of the clock sources for the M-Audio Fast Track C400. Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 6月, 2012 2 次提交
-
-
由 Oleksij Rempel 提交于
This webcam works mostly ok, exept with skype. Skype sends lots of ctrl messages to dynamically ajust record level. If for some reasons it pokes some error every thing goes broken: - first pulseaudio blocks sound for all apps - then video is reseted - then skype freez dmesg has lots of messages like: cannot set freq 16000 to ep 0x86" Setting ignore_ctl_error=1 fixes this problem. Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Oleksij Rempel 提交于
if this cam is pluged in, pulse audio can't initiate capture device. dmesg has lots of messages like: "cannot set freq 16000 to ep 0x86" Setting ignore_ctl_error=1 fixes this problem. Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 4月, 2012 1 次提交
-
-
由 Mark Hills 提交于
The mixer units from the firmware are corrupt, and even where they are valid they presents mono controls as L and R channels of stereo. Signed-off-by: NMark Hills <mark@pogo.org.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 6月, 2010 1 次提交
-
-
由 Daniel Mack 提交于
Move more definitions from private enums to appropriate header files. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 3月, 2010 2 次提交
-
-
由 Daniel Mack 提交于
For clearer namespace, also rename usbmixer_maps.c -> mixer_maps.c Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Mack 提交于
No need for the private enum. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2010 1 次提交
-
-
由 Jaroslav Kysela 提交于
USB devices tends to represent dB ranges in different way than ALSA expects. Add possibility to override these values and add guessed values for SoundBlaster MP3+. Also rename 'Capture Input Source' control to 'Capture Source' for SoundBlaster MP3+ and Extigy. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 01 12月, 2009 1 次提交
-
-
由 Alexey Fisher 提交于
Muse Pocket use brocken mixer names, so alsamixer and PA can't use it correctly This patch add quirk to overwirte default mixers. Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 1月, 2009 1 次提交
-
-
由 Andreas Bergmeier 提交于
Ignore errors (wrong usb interface data) found when using the serato scratch live box with alsa Thus the alsa controls can be accessed (beware: they don't work though - but at least it's one ugly error message less) Signed-off-by: NAndreas Bergmeier <lcid-fire@gmx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 1月, 2009 1 次提交
-
-
由 Andrea Borgia 提交于
The Toshiba Multimedia Center SB-0500 is a rebranded version of the Creative Technology SB Live! 24-bit External: it shares the same chipset and only has minor cosmetic differences. Remote controller works with alsa_usb module, basic audio is there and mixer controls are mostly untested. Signed-off-by: NAndrea Borgia <andrea@borgia.bo.it> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 1 次提交
-
-
由 Timofei Bondarenko 提交于
This patch improves support for 'SB Live 24-bit Extarnal' USB card. 1) This card can go into muted state when a headphones connected or disconnected. So notify mixer about changes in headphone jack. 2) Add LED controls and procfs support just as in similar Audigy 2 NX card. 3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality: the card may adjust microphone input level only. Signed-off-by: NTimofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 23 9月, 2006 1 次提交
-
-
由 Clemens Ladisch 提交于
Add a mixer name map for the TerraTec Aureon 5.1 MkII USB. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
- 22 3月, 2006 1 次提交
-
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Add mixer control names for the AudioTrak Maya44 USB. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
- 04 11月, 2005 2 次提交
-
-
由 Jaroslav Kysela 提交于
Modules: USB generic driver Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Modules: USB generic driver Add a quirk entry for the Hercules DJ Console to ignore timeouts on some mixer control transfers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
- 07 10月, 2005 2 次提交
-
-
由 Clemens Ladisch 提交于
USB generic driver Add a mixer quirk entry for the Hercules DJ Console (Windows Edition) that uses a different USB product ID. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add a quirk entry for the Hercules DJ Console to ignore timeouts on some mixer control transfers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
- 29 5月, 2005 4 次提交
-
-
由 Clemens Ladisch 提交于
USB generic driver Cache the decoded values of idVendor/idProduct to get rid of most of those ugly le16_to_cpu() calls. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add a mechanism to specify source names of selector units, and add such names for the SB Audigy 2 NX. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add a mixer control map for the SB Audigy 2 NX so that we get meaningful mixer control names. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
USB generic driver Added the mixer mapping for Sound Blaster MP3+ by Pavel Mihaylov <bin@bash.info> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-