That is needed by at least a cleanup in radeon.

v2: also export ttm_bo_vm_access
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339353/

This commit sets the remaining atomic-modesetting helpers and the flag
DRIVER_ATOMIC. Legacy cursor functions are removed in favor of the cursor
plane. For power management, atomic helpers replace the indvidual
operations that the driver currently runs.

Atomic modesetting is enabled with this commit.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-10-tzimmermann@suse.de

The cursor plane uses an internal format of ARGB4444. To userspace, we
announce ARGB8888 and do the transformation internally.

v2:
	* don't set plane call-back functions to NULL explicitly
	* define plane format array in global scope
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de

As the CRTC code has already been prepared for a split between mode
setting and plane handling, most of the CRTC's atomic modesetting is
build upon primitives of the non-atomic implementation.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-8-tzimmermann@suse.de

Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.

v2:
	* don't set plane call-back functions to NULL explicitly
	* define plane format array in global scope
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de

The implementation of ast_set_vbios_mode() converts a DRM display mode
and framebuffer into an adjusted mode and stores information for the
video BIOS to several scratch regsiters.

Here we split the function into individual functions that do the
conversion, set the VBIOS mode information and format information.
This makes it compatible with support for primary planes and atomic
modesetting.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-6-tzimmermann@suse.de

In ast_set_ext_reg() sets several framebuffer options and CRT threshold
parameters. The former is mostly state of the primary plane; the latter
is constant. Hence, split the function in two and make it work with
atomic modesetting.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-5-tzimmermann@suse.de

The content of the base-address and offset registers are state of
the primary plane. Clearing it to default values will interfere with
plane functions for atomic mode setting.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-4-tzimmermann@suse.de

Each video mode's primary plane requires a minimum amount of video
memory. For double buffering, this is at most half the available
VRAM. Check this constraint.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-3-tzimmermann@suse.de

The ast driver has switched to struct drm_vram_gem_object a while ago.
This patch removes a function and forward declaration that were forgotten
before.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-2-tzimmermann@suse.de

The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
for portable devices. This driver adds initial support for RGB to eDP
mode, without HPD and interrupts.

This is a configuration usually seen in eDP applications.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NTorsten Duwe <duwe@suse.de>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135220.590D968BFE@verein.lst.de

Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NTorsten Duwe <duwe@suse.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135218.01C2168C4E@verein.lst.de

Some code can be shared within different DP bridges by Analogix.
Extract them to analogix_dp.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NTorsten Duwe <duwe@suse.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de

Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.

Split out them to dedicated headers, and make analogix-anx78xx.h include
them.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NTorsten Duwe <duwe@suse.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135212.4D41E68BE1@verein.lst.de

As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTorsten Duwe <duwe@suse.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NJyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <b8faad34102a91698b55dfc1ce02b1a90fda5e44.1564591626.git.andrzej.p@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/ <db323a3cdfd643cef65d796e959c16a14f105920.1564591626.git.andrzej.p@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/ <b8faad34102a91698b55dfc1ce02b1a90fda5e44.1564591626.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <db323a3cdfd643cef65d796e959c16a14f105920.1564591626.git.andrzej.p@collabora.com

Switch to using the ddc provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <613c1c09ff7db5be60ef86f930b45b3f56b4838d.1564591626.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NSean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/ <1e343b02195757bfbf60ca8999cadeb376db204e.1566845537.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <a1f778d328328f15300338600bb2400850717300.1566845537.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <4cad24dde4508cec17483f983da08226ba7e48b0.1566845537.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <40293fa4e619d1d1af213a076b1d03440e50c56c.1566845537.git.andrzej.p@collabora.com

Use the ddc pointer provided by the generic connector.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <3c8b030bb89ec5aeafdb3c294cb6b3403d8c0601.1566845537.git.andrzej.p@collabora.com

Legacy (non-atomic) page flip support is added to the driver by using the
mode_set_base CRTC function, that allows configuring a new framebuffer for
display. Since the function requires the primary plane's fb to be set
already, this is done prior to calling the function in the page flip helper
and reverted if the flip fails.

The vblank interrupt handler is also refactored to support passing an event.
The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield
only, as explained in psb_enable_vblank.

It was tested by running weston on both poulsbo and cedartrail.
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-3-paul.kocialkowski@bootlin.com

This adds a missing call to drm_crtc_vblank_on to the common DPMS helper
(used by poulsbo and cedartrail), which is called in the CRTC enable path.

With that call, it becomes possible to enable vblank when needed.
It is already balanced by a drm_crtc_vblank_off call in the helper.

Other platforms (oaktrail and medfield) use a dedicated DPMS helper that
does not have the proper vblank on/off hooks. They are not added in this
commit due to lack of hardware to test it with.
Signed-off-by: NPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-2-paul.kocialkowski@bootlin.com

Both functions are unused and can be removed. Drivers should use
drm_fbdev_generic_setup() instead.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NNoralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-3-tzimmermann@suse.de

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NJames Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: NMihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a6ea39-3e4b-2ebe-74f7-98720e581e3e@web.de

With nouveau fixed all ttm-using drives have the correct nesting of
mmap_sem vs dma_resv, and we can just lock the buffer.

Assuming I didn't screw up anything with my audit of course.

v2:
- Dont forget wu_mutex (Christian König)
- Keep the mmap_sem-less wait optimization (Thomas)
- Use _lock_interruptible to be good citizens (Thomas)

v3: Rebase over fault handler helperification.

Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Reviewed-by: Thomas Hellström <thellstrom@vmware.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-3-daniel.vetter@ffwll.ch

We can't copy_*_user while holding reservations, that will (soon even
for nouveau) lead to deadlocks. And it breaks the cross-driver
contract around dma_resv.

Fix this by adding a slowpath for when we need relocations, and by
pushing the writeback of the new presumed offsets to the very end.

Aside from "it compiles" entirely untested unfortunately.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-2-daniel.vetter@ffwll.ch

Small changes in the driver documentation, clarifing the description.
Signed-off-by: NGabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101223735.2425-1-gabrielabittencourt00@gmail.com

Properties can't be attached after registering, userspace would get
confused (no one bothers to reprobe really).

- Add kerneldoc
- Enforce this with some checks. This needs a somewhat ugly check
  since connectors can be added later on, but we still need to attach
  all properties before they go public.

Note that we already enforce that properties themselves are created
before the entire device is registered.

Unfortunately this doesn't work for drivers which have a ->load
callback, see

commit e0f32f78 (tag:
drm-misc-next-fixes-2019-09-18)
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Sep 17 14:09:35 2019 +0200

    drm/kms: Duct-tape for mode object lifetime checks

for the full story.

v2: Fix the superflous newline (Jani) and add commit citation to
explain why we need to check for dev->registered (Thierry).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rajat Jain <rajatja@google.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023144953.28190-1-daniel.vetter@ffwll.ch

Replace open coded divisor calculations with the DIV_ROUND_UP kernel
macro for better readability.
Issue found using coccinelle:
@@
expression n,d;
@@
(
- ((n + d - 1) / d)
+ DIV_ROUND_UP(n,d)
|
- ((n + (d - 1)) / d)
+ DIV_ROUND_UP(n,d)
)
Signed-off-by: NWambui Karuga <wambui.karugax@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025094907.3582-1-wambui.karugax@gmail.com

Fixes: 75a57669 ("drm/ttm: add ttm_sg_tt_init")
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.kernel.org/patch/10263323/

The default TTM fault handler may not be completely sufficient
(vmwgfx needs to do some bookkeeping, control the write protectionand also
needs to restrict the number of prefaults).

Also make it possible replicate ttm_bo_vm_reserve() functionality for,
for example, mkwrite handlers.

So turn the TTM vm code into helpers: ttm_bo_vm_fault_reserved(),
ttm_bo_vm_open(), ttm_bo_vm_close() and ttm_bo_vm_reserve(). Also provide
a default TTM fault handler for other drivers to use.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/332900/?series=67217&rev=1Signed-off-by: NChristian König <christian.koenig@amd.com>

The explicit typcasts are meaningless, so remove them.
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/332899/Signed-off-by: NChristian König <christian.koenig@amd.com>

Commit c40069cb ("drm: add mmap() to drm_gem_object_funcs")
introduced a GEM object mmap() hook which is expected to subtract the
fake offset from vm_pgoff. However, for mmap() on dmabufs, there is not
a fake offset.

To fix this, let's always call mmap() object callback with an offset of 0,
and leave it up to drm_gem_mmap_obj() to remove the fake offset.

TTM still needs the fake offset, so we have to add it back until that's
fixed.

Fixes: c40069cb ("drm: add mmap() to drm_gem_object_funcs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191024191859.31700-1-robh@kernel.org

Instead of tracking per-slot utilisation track a single value for the
entire GPU. Ultimately it doesn't matter if the GPU is busy with only
vertex or a combination of vertex and fragment processing - if it's busy
then it's busy and devfreq should be scaling appropriately.

This also makes way for being able to submit multiple jobs per slot
which requires more values than the original boolean per slot.
Reviewed-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NSteven Price <steven.price@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025134143.14324-3-steven.price@arm.com

Use dev_pm_opp_set_rate() instead of open coding the devfreq
integration, simplifying the code.
Reviewed-by: NMark Brown <broonie@kernel.org>
Reviewed-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: NAlyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: NSteven Price <steven.price@arm.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191025134143.14324-2-steven.price@arm.com

Commit 7d79aa86 ("drm/vboxvideo: Replace struct vram_framebuffer
with generic implemenation") removed the diy framebuffer code from
the vboxvideo driver, resulting in a nice cleanup.

But since the vboxvideo driver needs the generic dirty tracking code,
it's drm_mode_config_funcs.fb_create should be set to
drm_gem_fb_create_with_dirty not drm_gem_fb_create.

This commit fixes this, fixing the framebuffer not always updating.

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 7d79aa86 ("drm/vboxvideo: Replace struct vram_framebuffer with generic implemenation")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028133159.236550-1-hdegoede@redhat.com

Instead of relying on the DRM functions just implement our own import
functions. This prepares support for taking care of unpinned DMA-buf.

v2: enable for all exporters, not just amdgpu, fix invalidation
    handling, lock reservation object while setting callback
v3: change to new dma_buf attach interface
v4: split out from unpinned DMA-buf work
v5: rebased and cleanup on new DMA-buf interface
v6: squash with invalidation callback change,
    stop using _(map|unmap)_locked
v7: drop invalidations when the BO is already in system domain
v8: rebase on new DMA-buf patch and drop move notification
v9: cleanup comments
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/337948/