- 02 5月, 2007 4 次提交
-
-
由 David Brownell 提交于
This shrinks the size of "struct i2c_client" by 40 bytes: - Substantially shrinks the string used to identify the chip type - The "flags" don't need to be so big - Removes some internal padding It also adds kerneldoc for that struct, explaining how "name" is really a chip type identifier; it's otherwise potentially confusing. Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name and for i2c_adapter.name, this needed to affect i2c_adapter too. The adapters which used that symbol now use the more-obviously-correct idiom of taking the size of that field. JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to avoid wasting space in padding. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 David Brownell 提交于
Minor cleanup in i2c_register_driver(): use list_for_each_entry(). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Kill i2c_adapter_driver as it doesn't make sense and it prevents further i2c-core cleanups. i2c_adapter devices are virtual devices (ex-class devices) and as such they don't need a driver. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Kill i2c_adapter.class_dev. Instead, set the class of i2c_adapter.dev to i2c_adapter_class, so that a symlink will be created for every i2c_adapter in /sys/class/i2c-adapter. The same change must be mirrored to i2c-isa as it duplicates some of the i2c-core functionalities. User-space tools and libraries might need some adjustments. In particular, libsensors from lm_sensors 2.10.3 or later is required for proper discovery of i2c adapter names after this change. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 01 5月, 2007 2 次提交
-
-
由 Linus Torvalds 提交于
The Marvell IDE interface on my machine would hit a BUG_ON() in lib/iomem.c because it was calling ata_pci_init_one() specifying just a single port on the host, but that would actually end up trying to initialize two ports, the second one with bogus information. This fixes "ata_pci_init_one()" so that it actually passes down the n_ports variable that it got from the low-level driver to the host allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA layer actually having the correct port number information. And in order to make it all work, I also needed to fix a few places that had incorrectly hard-coded the fact that a host always had exactly two ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would just always iterate over both ports). Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: linux-pm@lists.linux-foundation.org Cc: Len Brown <lenb@kernel.org> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 4月, 2007 34 次提交
-
-
由 James Chapman 提交于
This patch allows a name "pppox-proto-nnn" to be used in modprobe.conf to autoload a PPPoX protocol nnn. Signed-off-by: NJames Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
Currently we scale the mempool sizes depending on memory installed in the machine, except for the bio pool itself which sits at a fixed 256 entry pre-allocation. There's really no point in "optimizing" this OOM path, we just need enough preallocated to make progress. A single unit is enough, lets scale it down to 2 just to be on the safe side. This patch saves ~150kb of pinned kernel memory on a 32-bit box. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Paul Mackerras 提交于
Commit 404d5b18 changed the definition of dev_dbg in the !DEBUG case from being a #define to being a static inline. There was code in drivers/ps3/vuart.c to do exactly that, which fails to compile now. This fixes it by removing the redefinition, as the redefinition is now superfluous. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Dave Jiang 提交于
Remove option of making booke_wdt into a kernel module. This watchdog cannot be disabled. No point being a kernel module. Signed-off-by: NDave Jiang <djiang@mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
- s/Device Drivers/Controllers/ - clarify who needs pcilynx - don't recommend Y for raw1394; M is typically used Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Simon Arlott 提交于
Fix the "attempting to setting" message in ohci1394. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Bernhard Kauer 提交于
Remove the unneeded code that clears, sets and again clears the rcvPhyPkt bit in the ohci1394 LinkControl register in ohci_initialize(). Signed-off-by: NBernhard Kauer <kauer@os.inf.tu-dresden.de> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
If posted write failed, an "Unhandled interrupt(s) 0x00000100" message was logged by mistake. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
eth1394 did not work on buses consisting of S100B...S400B hardware because it attempted to send GASP packets at S800. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Akinobu Mita 提交于
This patch fixes some error handlings in eth1394: - check return value of kmem_cache_create() - cleanup resources if hpsb_register_protocol() fails Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (whitespace)
-
由 Stefan Richter 提交于
This patch actually doesn't change anything because there was always 0 == NETDEV_TX_OK returned before. TODO: Return NETDEV_TX_BUSY in error case and test in different error conditions. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
offset > fi->offset + fi->len - 1 == !(offset < fi->offset + fi->len) offset + len - 1 < fi->offset == !(offset + len > fi->offset) !(A || B) == (!A && !B) Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
We can't reconfigure the MAC address, hence we don't need the callback. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
because CONFIG_IEEE1394_ETH1394 depends on it. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
RFC 2734 says: "IP-capable nodes may operate with an MTU size larger than the default [1500 octets], but the means by which a larger MTU is configured are beyond the scope of this document." Allow users to set an MTU bigger than 1500. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Adrian Bunk 提交于
highlevel_host_reset no longer has any modular users. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Call only eth1394's own host reset handler from .tx_timeout, not the reset hooks of all other IEEE 1394 drivers. A minor drawback of this patch is that ether1394_host_reset by timeout is not serialized against ether1394_host_reset by bus reset. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The old argument calculated the correct value in a wrong way. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Move common code into an extra function. This implicitly adds a missing node_info->fifo = CSR1212_INVALID_ADDR_SPACE; to .update. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Adjust white space and line wraps. Remove unnecessary parentheses and braces, unused macros, and some of the more redundant comments. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Jean Delvare 提交于
There is some common code between ether1394_open and ether1394_add_host which can be moved to a separate helper function for a slightly smaller eth1394 driver (-160 bytes on i386.) Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Until now, ieee1394 put an IP-over-1394 capability entry into each new host's config ROM. As soon as the controller was initialized --- i.e. right after modprobe ohci1394 --- this entry triggered a hotplug event which typically caused auto-loading of eth1394. This irritated or annoyed many users and distributors. Of course they could blacklist eth1394, but then ieee1394 wrongly advertized IP-over- 1394 capability to the FireWire bus. Therefore - remove the offending kernel config option IEEE1394_CONFIG_ROM_IP1394, - let eth1394 add the ROM entry by itself, i.e. only after eth1394 was loaded. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=7793 . To emulate the behaviour of older kernels, simply add the following to to /etc/modprobe.conf: install ohci1394 /sbin/modprobe eth1394; \ /sbin/modprobe --ignore-install ohci1394 Note, autoloading of eth1394 when an _external_ IP-over-1394 capable device is discovered is _not_ affected by this patch. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Shrinks eth1394.ko by about 5%. Many of these functions have only one caller and are therefore auto- inlined anyway. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
ether1394_add_host() guarantees that hi->dev != NULL if hi != NULL. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Warn if hpsb_allocate_and_register_addrspace() failed. Unregister the address space if something else failed. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
The comment says it all. This affects only asynchronous streams sent via raw1394; the eth1394 driver has own code and needs an own fix. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Milind Arun Choudhary 提交于
SPIN_LOCK_UNLOCKED cleanup,use DEFINE_SPINLOCK instead Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Shrinks object file size a little bit. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-