提交 · 208277f74e449fca082c1895086bd44c159efba5 · openeuler / Kernel

08 3月, 2011 40 次提交

ARM: mxs: make ssp error irq definition consistent · 208277f7

由 Shawn Guo 提交于 2月 21, 2011

Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

208277f7

ARM: mxs: add dma device · 3baa4fee

由 Shawn Guo 提交于 2月 22, 2011

Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

3baa4fee

ARM: mxs: add dma channel definitions · 4ca94366

由 Shawn Guo 提交于 2月 21, 2011

Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Tested-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

4ca94366

ARM: mxs/mx23evk: add framebuffer device · b73d77b2

由 Shawn Guo 提交于 3月 06, 2011

Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

b73d77b2

ARM: mxs: fix typo "GPO" in iomux-mx23.h · 122eb103

由 Shawn Guo 提交于 3月 06, 2011

Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

122eb103

ARM: mxs: add helper macro for pad control · db63a493

由 Shawn Guo 提交于 3月 06, 2011

This patch is to add pad control helper macro to make the code easy
to read.  The need is being seen when adding pad definitions for
LCDIF which gets ~30 pads to define.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

db63a493

ARM: mxc91231: select MXC_AVIC · 65e7a322

由 Uwe Kleine-König 提交于 3月 03, 2011

This fixes:

	arch/arm/kernel/built-in.o: In function `__irq_svc':
	io.c:(.text+0x2e0): undefined reference to `avic_base'
	arch/arm/kernel/built-in.o: In function `__irq_usr':
	io.c:(.text+0x4c8): undefined reference to `avic_base'
	arch/arm/mach-mxc91231/built-in.o: In function `mxc91231_init_irq':
	magx-zn5.c:(.init.text+0x18): undefined reference to `mxc_init_irq'

and was broken by

	c7259df3 (ARM i.MX irq: Compile avic irq code only on SoCs that need it)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

65e7a322

ARM: imx3x: clean up ARCH_MX3X · c23eb89e

由 Richard Zhao 提交于 3月 03, 2011

Move to SOC_SOC_IMX3X.
Leave ARCH_MX31/35 definitions there, in case some place prevent multi-soc
single image.
Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Acked-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

c23eb89e

ARM: imx5x: clean up ARCH_MX5X · 76851671

由 Richard Zhao 提交于 3月 03, 2011

Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc
using ARCH_MX5X.
Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

76851671

ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers · 48f6b099

由 Sascha Hauer 提交于 3月 02, 2011

The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops,
both are only present if CONFIG_USB_ULPI is set. To remove the need of
ifdefs in the board code introduce a imx_otg_ulpi_create functions
which expands to a static inline function if compiled without ulpi.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

48f6b099

ARM i.MX31 lilly: remove incomplete otg support · 94573e66

由 Sascha Hauer 提交于 3月 02, 2011

The platform data for the otg port is present but never used, so
remove it.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Mack <daniel@caiaq.de>

94573e66

ARM i.MX: iomux v1 initialization away from initcall · ff255feb

由 Sascha Hauer 提交于 2月 17, 2011

This saves us from soc level dispatching in generic files
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

ff255feb

ARM i.MX: Move gpio initialization to SoC specific files · 5ae30b47

由 Sascha Hauer 提交于 2月 17, 2011

This saves us from soc level dispatching in generic files
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

5ae30b47

G
MX1: Add structure, registration functions for framebuffer and rename LCDC INT · 9685a360
由 Gwenhael Goavec-Merou 提交于 3月 02, 2011
```
Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
9685a360

ARM: mx5/mx53_evk: Fix IOMUX for UART3 · 54c4bd65

由 Fabio Estevam 提交于 3月 02, 2011

On mx53_evk board only RX/TX pins are used on UART3.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

54c4bd65

ARM: mx5/mx53_smd: Fix IOMUX for UART2 · d79c01b0

由 Fabio Estevam 提交于 3月 02, 2011

On mx53_smd board only RX/TX pins are used on UART2.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

d79c01b0

ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum · 1a46cce8

由 Fabio Estevam 提交于 3月 02, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

1a46cce8

arm: mxs: add irq_chip-name for GPIO IRQs · 761b6d1a

由 Wolfram Sang 提交于 3月 01, 2011

Reported-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

761b6d1a

S
ARM i.MX23/28: Add framebuffer device support · 2e8fd696
由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
```
2e8fd696

video: Add i.MX23/28 framebuffer driver · f0a523b5

由 Sascha Hauer 提交于 1月 14, 2011

changes since v2:

- use v3 and v4 for specifying the ip version instead of i.MX23/28.
  This is a better namespace when future versions are added.
- rename mach/fb.h to mach/mxsfb.h

changes since v1:
- Add a LCDC_ prefix to the register names.
- use set/clear registers where appropriate
- protect call to mxsfb_disable_controller() in mxsfb_remove()
  with a (host->enabled) as suggested by Lothar Wassmann
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-fbdev@vger.kernel.org

f0a523b5

ARM: mxc91231/iomux: allow pin_list to be const · 8d8eb177

由 Uwe Kleine-König 提交于 3月 02, 2011

While at it remove some useless consts from unsigned int arguments.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8d8eb177

ARM: iomux-imx31: allow pin_list to be const · 10a3c45c

由 Uwe Kleine-König 提交于 3月 02, 2011

This fixes the following warning in a mx3_defconfig build:

arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init':
arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type

While at it remove some useless consts from unsigned int arguments.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

10a3c45c

ARM: mx53_smd: Add I2C support · 20930238

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

20930238

ARM: mx25_3ds: Add I2C support · ff864521

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

ff864521

ARM: mx27_3ds: Add I2C support · 5885f036

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

5885f036

ARM: mx31_3ds: Add I2C support · 3d943024

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

3d943024

ARM: mx35_3ds: Add I2C support · 352cd9a0

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

352cd9a0

ARM: Add SSI and aic3204 code to Visstrim_M10 boards. · a5e2051b

由 Javier Martin 提交于 3月 01, 2011

Visstrim_M10 boards have an TI tlv320aic3204 codec
attached to SSI1.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

a5e2051b

ARM: mx3/cpuimx35: fix build failure · 3fc6b609

由 Uwe Kleine-König 提交于 3月 01, 2011

It seems vim's autocompletion played tricks on me without me noticing.
This was intruduced in
	97976e22 (ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

3fc6b609

ARM: imx53_loco: add esdhc device support · 772edeae

由 Richard Zhu 提交于 2月 28, 2011

Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

772edeae

ARM: imx51/53: add sdhc3/4 clock · 35921902

由 Richard Zhu 提交于 2月 28, 2011

Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

35921902

arm: mxs: tx28: add i2c bus and connected RTC · a77dd2aa

由 Wolfram Sang 提交于 2月 28, 2011

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

a77dd2aa

arm: mxs: add i2c-devices for mx28 · 30feed37

由 Wolfram Sang 提交于 2月 28, 2011

Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

30feed37

MX1: Add registration functions for SPI. · 19373c04

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

19373c04

MX1: Add data structure for SPI · 13f40686

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

13f40686

MX1: Register clock for SPI2 · e893f7cb

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

e893f7cb

MX1: Rename SPI interrupt name and base address. · 40b2747b

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

40b2747b

ARM: imx35: fix trivial copy/paste error · 4dbbaa69

由 Ryan Lortie 提交于 2月 26, 2011

Change imx31_add_imx_keypad() to imx35_add_imx_keypad() in
mach-mx3/devices-imx35.h.
Signed-off-by: NRyan Lortie <desrt@desrt.ca>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

4dbbaa69

ARM: imx35: fix ATA_DATA3 pad control address · d058b649

由 Ryan Lortie 提交于 2月 26, 2011

According to the "i.MX35 (MCIMX35) Multimedia Applications Processor
Reference Manual" the correct address for the pad control register
IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8.
Signed-off-by: NRyan Lortie <desrt@desrt.ca>
Acked-by: NMarc Reilly <marc@cpdesign.com.au>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

d058b649

i.MX25: add sdma clock definitions · 20fcd4aa

由 Eric Bénard 提交于 2月 25, 2011

Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

20fcd4aa

openeuler / Kernel 大约 1 年 前同步成功

openeuler / Kernel
大约 1 年前同步成功