- 21 3月, 2008 27 次提交
-
-
由 Peter Zijlstra 提交于
TREE_AVG and APPROX_AVG are initial task placement policies that have been disabled for a long while.. time to remove them. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> CC: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix atomic backoff limit.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) [NET] ifb: set separate lockdep classes for queue locks [IPV6] KCONFIG: Fix description about IPV6_TUNNEL. [TCP]: Fix shrinking windows with window scaling netpoll: zap_completion_queue: adjust skb->users counter bridge: use time_before() in br_fdb_cleanup() [TG3]: Fix build warning on sparc32. MAINTAINERS: bluez-devel is subscribers-only audit: netlink socket can be auto-bound to pid other than current->pid (v2) [NET]: Fix permissions of /proc/net [SCTP]: Fix a race between module load and protosw access [NETFILTER]: ipt_recent: sanity check hit count [NETFILTER]: nf_conntrack_h323: logical-bitwise & confusion in process_setup() [RT2X00] drivers/net/wireless/rt2x00/rt2x00dev.c: remove dead code, fix warning [IPV4]: esp_output() misannotations [8021Q]: vlan_dev misannotations xfrm: ->eth_proto is __be16 [IPV4]: ipv4_is_lbcast() misannotations [SUNRPC]: net/* NULL noise [SCTP]: fix misannotated __sctp_rcv_asconf_lookup() [PKT_SCHED]: annotate cls_u32 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.25: sh: Use relative paths for mach/cpu symlinks. SH: Use newer, non-deprecated __SPIN_LOCK_UNLOCKED macro. sh: Fix more user header breakage from sh64 integration. sh: Fix uImage build error. sh: Fix up the timer IRQ definition for SH7203. sh: Fix up the address error exception handler for SH-2. serial: sh-sci: Fix fifo stall on SH7760/SH7780/SH7785 SCIF.
-
由 Franck Bui-Huu 提交于
When building the kernel without passing the O= command line parameter there's no point to use absolute paths for them. Usually relative paths are preferred because they survive directory moves, work across networked file systems and chrooted environments. Absolute paths are still used if an output directory is given. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Jarek Poplawski 提交于
[ 10.536424] ======================================================= [ 10.536424] [ INFO: possible circular locking dependency detected ] [ 10.536424] 2.6.25-rc3-devel #3 [ 10.536424] ------------------------------------------------------- [ 10.536424] swapper/0 is trying to acquire lock: [ 10.536424] (&dev->queue_lock){-+..}, at: [<c0299b4a>] dev_queue_xmit+0x175/0x2f3 [ 10.536424] [ 10.536424] but task is already holding lock: [ 10.536424] (&p->tcfc_lock){-+..}, at: [<f8a67154>] tcf_mirred+0x20/0x178 [act_mirred] [ 10.536424] [ 10.536424] which lock already depends on the new lock. lockdep warns of locking order while using ifb with sch_ingress and act_mirred: ingress_lock, tcfc_lock, queue_lock (usually queue_lock is at the beginning). This patch is only to tell lockdep that ifb is a different device (e.g. from eth) and has its own pair of queue locks. (This warning is a false-positive in common scenario of using ifb; yet there are possible situations, when this order could be dangerous; lockdep should warn in such a case.) (With suggestions by David S. Miller) Reported-and-tested-by: NDenys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Based on notice from "Colin" <colins@sjtu.edu.cn>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When selecting a new window, tcp_select_window() tries not to shrink the offered window by using the maximum of the remaining offered window size and the newly calculated window size. The newly calculated window size is always a multiple of the window scaling factor, the remaining window size however might not be since it depends on rcv_wup/rcv_nxt. This means we're effectively shrinking the window when scaling it down. The dump below shows the problem (scaling factor 2^7): - Window size of 557 (71296) is advertised, up to 3111907257: IP 172.2.2.3.33000 > 172.2.2.2.33000: . ack 3111835961 win 557 <...> - New window size of 514 (65792) is advertised, up to 3111907217, 40 bytes below the last end: IP 172.2.2.3.33000 > 172.2.2.2.33000: . 3113575668:3113577116(1448) ack 3111841425 win 514 <...> The number 40 results from downscaling the remaining window: 3111907257 - 3111841425 = 65832 65832 / 2^7 = 514 65832 % 2^7 = 40 If the sender uses up the entire window before it is shrunk, this can have chaotic effects on the connection. When sending ACKs, tcp_acceptable_seq() will notice that the window has been shrunk since tcp_wnd_end() is before tp->snd_nxt, which makes it choose tcp_wnd_end() as sequence number. This will fail the receivers checks in tcp_sequence() however since it is before it's tp->rcv_wup, making it respond with a dupack. If both sides are in this condition, this leads to a constant flood of ACKs until the connection times out. Make sure the window is never shrunk by aligning the remaining window to the window scaling factor. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
zap_completion_queue() retrieves skbs from completion_queue where they have zero skb->users counter. Before dev_kfree_skb_any() it should be non-zero yet, so it's increased now. Reported-and-tested-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Checconi 提交于
In br_fdb_cleanup() next_timer and this_timer are in jiffies, so they should be compared using the time_after() macro. Signed-off-by: NFabio Checconi <fabio@gandalf.sssup.it> Signed-off-by: NStephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sparc MAC address support should be protected consistently with CONFIG_SPARC, but there was a stray CONFIG_SPARC64 case. Bump driver version and release date. Reported by Andrew Morton. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Machek 提交于
Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
From: Pavel Emelyanov <xemul@openvz.org> This patch is based on the one from Thomas. The kauditd_thread() calls the netlink_unicast() and passes the audit_pid to it. The audit_pid, in turn, is received from the user space and the tool (I've checked the audit v1.6.9) uses getpid() to pass one in the kernel. Besides, this tool doesn't bind the netlink socket to this id, but simply creates it allowing the kernel to auto-bind one. That's the preamble. The problem is that netlink_autobind() _does_not_ guarantees that the socket will be auto-bound to the current pid. Instead it uses the current pid as a hint to start looking for a free id. So, in case of conflict, the audit messages can be sent to a wrong socket. This can happen (it's unlikely, but can be) in case some task opens more than one netlink sockets and then the audit one starts - in this case the audit's pid can be busy and its socket will be bound to another id. The proposal is to introduce an audit_nlk_pid in audit subsys, that will point to the netlink socket to send packets to. It will most often be equal to audit_pid. The socket id can be got from the skb's netlink CB right in the audit_receive_msg. The audit_nlk_pid reset to 0 is not required, since all the decisions are taken based on audit_pid value only. Later, if the audit tools will bind the socket themselves, the kernel will have to provide a way to setup the audit_nlk_pid as well. A good side effect of this patch is that audit_pid can later be converted to struct pid, as it is not longer safe to use pid_t-s in the presence of pid namespaces. But audit code still uses the tgid from task_struct in the audit_signal_info and in the audit_filter_syscall. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NEric Paris <eparis@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andre Noll 提交于
commit e9720acd ([NET]: Make /proc/net a symlink on /proc/self/net (v3)) broke ganglia and probably other applications that read /proc/net/dev. This is due to the change of permissions of /proc/net that was introduced in that commit. Before: dr-xr-xr-x 5 root root 0 Mar 19 11:30 /proc/net After: dr-xr--r-- 5 root root 0 Mar 19 11:29 /proc/self/net This patch restores the permissions to the old value which makes ganglia happy again. Pavel Emelyanov says: This also broke the postfix, as it was reported in bug #10286 and described in detail by Benjamin. Signed-off-by: NAndre Noll <maan@systemlinux.org> Acked-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
There is a race is SCTP between the loading of the module and the access by the socket layer to the protocol functions. In particular, a list of addresss that SCTP maintains is not initialized prior to the registration with the protosw. Thus it is possible for a user application to gain access to SCTP functions before everything has been initialized. The problem shows up as odd crashes during connection initializtion when we try to access the SCTP address list. The solution is to refactor how we do registration and initialize the lists prior to registering with the protosw. Care must be taken since the address list initialization depends on some other pieces of SCTP initialization. Also the clean-up in case of failure now also needs to be refactored. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hokka Zakrisson 提交于
If a rule using ipt_recent is created with a hit count greater than ip_pkt_list_tot, the rule will never match as it cannot keep track of enough timestamps. This patch makes ipt_recent refuse to create such rules. With ip_pkt_list_tot's default value of 20, the following can be used to reproduce the problem. nc -u -l 0.0.0.0 1234 & for i in `seq 1 100`; do echo $i | nc -w 1 -u 127.0.0.1 1234; done This limits it to 20 packets: iptables -A OUTPUT -p udp --dport 1234 -m recent --set --name test \ --rsource iptables -A OUTPUT -p udp --dport 1234 -m recent --update --seconds \ 60 --hitcount 20 --name test --rsource -j DROP While this is unlimited: iptables -A OUTPUT -p udp --dport 1234 -m recent --set --name test \ --rsource iptables -A OUTPUT -p udp --dport 1234 -m recent --update --seconds \ 60 --hitcount 21 --name test --rsource -j DROP With the patch the second rule-set will throw an EINVAL. Reported-by: NSean Kennedy <skennedy@vcn.com> Signed-off-by: NDaniel Hokka Zakrisson <daniel@hozac.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
logical-bitwise & confusion Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: nfs: don't ignore return value from nfs_pageio_add_request
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fix panic in handle_at_packet
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] a100u2w: fix bitmap lookup routine [SCSI] fix media change events for polled devices [SCSI] sd, sr: do not emit change event at device add [SCSI] mpt fusion: Power Management fixes for MPT SAS PCI-E controllers [SCSI] gdth: Allocate sense_buffer to prevent NULL pointer dereference [SCSI] arcmsr: fix iounmap error for Type B adapter [SCSI] isd200: Allocate sense_buffer for hacked up scsi_cmnd [SCSI] fix bsg queue oops with iscsi logout [SCSI] Fix dependency problems in SCSI drivers [SCSI] advansys: Fix bug in AdvLoadMicrocode
-
由 Stefan Richter 提交于
This fixes a use-after-free bug in the handling of split transactions. The AT DMA handler of the request was occasionally executed after the AR DMA handler of the response. The AT DMA handler then accessed an already freed packet. Reported by Johannes Berg. http://bugzilla.kernel.org/show_bug.cgi?id=9617Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJarod Wilson <jwilson@redhat.com>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4872/1: Replaces buggy macro in S3C2410 irq include [ARM] 4870/1: fix signal return code when enable CONFIG_OABI_COMPAT [ARM] 4869/1: ARM: OMAP: Fix compile for mcbsp [ARM] 4865/1: Register the F75375 device in the GLAN Tank platform code [ARM] 4864/1: Enable write buffer coalescing on IOP [ARM] 4863/1: AT91: CAP9 USART definitions for early debug [ARM] 4861/1: AT91: Update maintainer email address (again) ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt ARM: OMAP: Fix chain_a_transfer return value ARM: OMAP: Fix missing makefile options ARM: OMAP: Fix GPIO IRQ unmask ARM: OMAP: Fix clockevent support for hrtimers
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] futex: let futex_atomic_cmpxchg_pt survive early functional tests.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (7367): bug #10211: Fix depencencies for cx2341x V4L/DVB (7362): tvp5150.c: logical-bitwise and confusion V4L/DVB (7334): usb video: add a device link to usbvideo devices, else hal will ignore them V4L/DVB (7330): V4L1 - fix v4l_compat_translate_ioctl possible NULL deref V4L/DVB (7328): usb/opera1.c: fix a memory leak V4L/DVB (7291): em28xx: correct use of and fix V4L/DVB (7285): em28xx: Correct use of ! and & V4L/DVB (7279): ivtv: Add missing sg_init_table() V4L/DVB (7268): saa7134: fix: tuner should be loaded before calling saa7134_board_init2() V4L/DVB (7267): cx88: Fix: Loads tuner module before sending commands to it V4L/DVB (7251): VIDEO_VIVI must depend on VIDEO_DEV V4L/DVB (7242): ivtv: fix for yuv filter table check V4L/DVB (7236): bttv: struct member initialized twice V4L/DVB (7228): saa7134: fix FM radio support for the Pinnacle PCTV 110i
-
由 Serge Hallyn 提交于
The original justification for cap_task_kill() was as follows: check_kill_permission() does appropriate uid equivalence checks. However with file capabilities it becomes possible for an unprivileged user to execute a file with file capabilities resulting in a more privileged task with the same uid. However now that cap_task_kill() always returns 0 (permission granted) when p->uid==current->uid, the whole hook is worthless, and only likely to create more subtle problems in the corner cases where it might still be called but return -EPERM. Those cases are basically when uids are different but euid/suid is equivalent as per the check in check_kill_permission(). One example of a still-broken application is 'at' for non-root users. This patch removes cap_task_kill(). Signed-off-by: NSerge Hallyn <serge@hallyn.com> Acked-by: NAndrew G. Morgan <morgan@kernel.org> Earlier-version-tested-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Acked-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
a0c1e907 "futex: runtime enable pi and robust functionality" introduces a test wether futex in atomic stuff works or not. It does that by writing to address 0 of the kernel address space. This will crash on older machines where addressing mode switching is enabled but where the mvcos instruction is not available. Page table walking is done by hand and therefore the code tries to access current->mm which is NULL. Therefore add an extra check, so we survive the early test. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 3月, 2008 13 次提交
-
-
由 Russell King 提交于
Merge branch 'omap-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into m * 'omap-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM: OMAP1: Fix typo in OMAP1 MPU clock source initialization ARM: OMAP: Fix DMA CLINK mask, clear spurious interrupt ARM: OMAP: Fix chain_a_transfer return value ARM: OMAP: Fix missing makefile options ARM: OMAP: Fix GPIO IRQ unmask ARM: OMAP: Fix clockevent support for hrtimers
-
由 Davide Rizzo 提交于
This is a bug correction for a macro that generated wrong results. Nobody used it in official kernel tree, my driver did. Signed-off-by: NDavide Rizzo <davide@elpa.it> Acked-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 janboe 提交于
fix signal return code when enable CONFIG_OABI_COMPAT Signed-off-by: NJanboe Ye <janboe.ye@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Until DSP MMU code is merged, dsp_request_mem() does not exist. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Gordon Farquharson 提交于
This patch adds the code required to register the F75375 device on the GLAN Tank. Signed-off-by: NGordon Farquharson <gordonfarquharson@gmail.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Arnaud Patard 提交于
Some bootloaders are disabling write buffer coalescing. Enable it back under linux. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Define AT91_USART0, 1, 2 so the selection of the UART for early kernel messages works. (See commit fa3218d8). Replace AT91_SHDC with AT91_SHDWC to be consistent with other AT91 platforms. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Change email address of AT91 maintainer. This reverts the incorrect change in commit 6650e0a5Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mauro Carvalho Chehab 提交于
Fix for build #408 Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Roel Kluin 提交于
logical-bitwise & confusion Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Pascal Terjan 提交于
Signed-off-by: NPascal Terjan <pterjan@mandriva.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Cyrill Gorcunov 提交于
There are possible NULL pointer derefs in case of kzalloc fails so fix them. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes a memory leak in the "testval == 0x67" case spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-