MEI_CL_CONNECT_TIMEOUT is the timeout in seconds to wait
for a response in mei_cl_connect.
The value was converted to jiffies using mei_secs_to_jiffies
helper function and assigned to a local variable
which is by mistake again multiplied by HZ
Signed-off-by: NFrode Isaksen <frodex.isaksen@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

when we buffer write request we should not switch to
MEI_WRITING since this will override MEI_WRITE_COMPLETE
state of preceding write
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

mei_cl_irq_write_complete operates on a client so move it
to client.c
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In a SMP case there was a race condition issue between
uio_pdrv_genirq_irqcontrol() running on one CPU and irq handler on
another CPU. Fix it by spin_locking shared resources access inside irq
handler.  Also:
  - Change disable_irq to disable_irq_nosync to avoid deadlock, because
    disable_irq waits for the completion of the irq handler;
  - Change atomic bit-manipulation routines to their non-atomic
    counterparts as we already are guarding the code by spinlock.
Signed-off-by: NVitalii Demianets <vitas@nppfactor.kiev.ua>
Reviewed-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This eliminates having an #ifdef returning NULL for the case
when OF is disabled.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NDamian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In fa1f68db ("drivers: misc: pass miscdevice pointer via file
private data"), the misc driver infrastructure was changed to assigned
file->private_data as a pointer to the 'struct miscdevice' that
corresponds to the device being opened.

However, this assignment was only done when the misc driver was
declaring a driver-specific ->open() operation in its
file_operations. This doesn't make sense, as the driver may not
necessarily have a custom ->open() operation, and might still be
interested in having file->private_data properly set for use in its
->read() and write() operations.

Therefore, we move the assignment of file->private_data outside of the
condition that tests whether a driver-specific ->open() operation was
defined.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We currently allocate synic structures in hv_sync_init(), but there's no way for
the driver to know about the allocation failure and it may continue to use the
uninitialized pointers. Solve this by introducing helpers for allocating and
freeing and doing the allocation before the on_each_cpu() call in
vmbus_bus_init().

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patches add a read barriers to force the driver to check the interrupt mask
before read_index. Otherwise we may lost a kick to host.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to return a negative error code in the tsi148_crcsr_init() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The call to kzalloc() wasn't checked.
The dev_info() message dereferenced freed memory on error.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The use of the 'readl' and 'writel' identifiers here causes build errors on
architectures where those are macros. This renames the fields to read32/write32
to avoid the problem.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If we don't allocate "arr" then the cleanup path will dereference it and
oops.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If device is initialized from device tree, but has no interrupt
assigned, uio will still try to request and interrupt old way,
fails, and fails registration.

This is wrong; don't try initializing irq using platform data if
device tree is available.

Simplified code based on suggestion by Grant Likely.

Fixed memory leak in "irq can not be registered" error path.
Signed-off-by: NPavel Machek <pavel@denx.de>
Reported-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds ability to bind uio driver to given open firmware device
using command line option. Thus, userspace driver can be developed and
used without modifying the kernel.
Signed-off-by: NPavel Machek <pavel@denx.de>
Tested-by: NDetlev Zundel <dzu@denx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver exports the memory area associated with the mezzanine card
as a misc device, so users can access registers.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver allows to reprogram the EEPROM in a mezzanine, to store
its own identifiers during manufacturing or to save other useful data.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This simple do-nothing mezzanine driver shows how to write a mezzanine
driver, that can also handle interrupts reported by the carrier.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fake carrier is designed to help FMC users understand how a
carrier driver works, and to experiment the behaviour with EEPROM
reprogramming (with a mezzanine driver commited later). This carrier
can register up to 4 (fake) mezzanines.

We have real carriers (both on PCI-E and VME), but they are bigger
things and are not part of this submission.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is selected sections of the current manual for fmc-bus, as
developed outside of the kernel before submission.

Like the other patches in this set, it corresponds to commit ab23167f of
the repository at ohwr.org
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Acked-by: NRob Landley <rob@landley.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This module offers registration services for both carriers
(i.e. devices) and mezzanines (i.e. drivers). The matching for devices
and drivers is performed according to the IPMI standard for FRU
devices (Field Replaceable Units).

The code includes support for parsing an SDB tree if present in the FPGA,
and dumping it for diagnostics. SDB is not mandatory.

Files in this commit correspond to commit ab23167f in the master branch
of the project hosted on ohwr.org.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This hopefully will help point developers to the proper way that patches
should be submitted for inclusion in the stable kernel releases.
Reported-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Even if guest were compiled without SMP support, it could not assume that host
wasn't. So switch to use mb() instead of smp_mb() to force memory barriers for
UP guest.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In Tegra30 any memory controller interrupt would cause an infinite loop in the
IRQ handler. Additionally, a garbage pointer was used to read the MC
status registers, which causes wrong values to be printed if a MC error
occurred.
Signed-off-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In Tegra20 any memory controller interrupt would cause an
infinite loop in the IRQ handler.
Signed-off-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver can work properly if device support driver HBM version
or driver can downgrade its supported HBM version level
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The tsi148 driver can be configured to reserve a window for internal
use (as part of the error checking routine). The intialisation of this
window currently configures a set of attributes that are never used
as these are only ever used by the VME core and this window is not
advertised to the core.

Remove configuration of these attributes.
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The logic in the init routine for the TSI148 is inverted. It isn't switching
on the CR/CSR space when it should be and is reporting it's on when its not.

Correct the logic to do the right thing.
Reported-by: NDe Roo, Steven <steven.deroo@arcelormittal.com>
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The TSI148 driver provides an optional mechanism for ensuring that errors
resulting from posted transfers are caught whilst still relevant. To do this
errors are stored in a link list. If bus errors are not checked, this list
would grow until available memory had been exhausted.

Only store the errors in a link list if error detection is switched on.
Reported-by: NDe Roo, Steven <steven.deroo@arcelormittal.com>
Signed-off-by: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Patch removes unneeded check for resource since
devm_ioremap_resource do all for us.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No dependencies of PCMCIA and ARCH_CLPS711X.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This set of headers comes from commit ab23167f (current master of the
project on ohwr.org). They define the basic data structures for FMC
and its SDB support.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit creates the drivers/fmc directory and puts the necessary
hooks for kbuild and kconfig.  The code is currently a placeholder
that only registers an empty bus.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Acked-by: NJuan David Gonzalez Cobas <dcobas@cern.ch>
Acked-by: NEmilio G. Cota <cota@braap.org>
Acked-by: NSamuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the driver for the USB comparator built into the palmas chip. It
handles the various USB OTG events that can be generated by cable
insertion/removal.
Signed-off-by: NGraeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: NMoiz Sonasath <m-sonasath@ti.com>
Signed-off-by: NRuchika Kharwar <ruchika@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NGeorge Cherian <george.cherian@ti.com>
[kishon@ti.com: adapted palmas usb driver to use the extcon framework]
Signed-off-by: NSebastien Guiriec <s-guiriec@ti.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Added EXPORT_SYMBOL_GPL() for extcon_register_interest and
extcon_register_notifier in order to avoid undefined reference
error when building the consumer modules of extcon as _modules_.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch change permission from read/write to only read.
The specific process in the user-space couldn't change the state
of cable when cable is attached or detached.
- /sys/class/extcon/[devine name]/state
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use errno and strerror() when logging errors to provide
more information.
Signed-off-by: NTomas Hozza <thozza@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the fixes in here.

Pull ARM SoC fixes from Olof Johansson:
 "These are a little later than I planned on since I got caught up with
  handling merges for 3.11 most of the week.

  Another week, another batch of fixes for arm-soc platforms.

  Again, nothing controversial.  A few more than would be ideal, but all
  are valid fixes.  In particular the prima2 panic patch is critical
  since it fixes a problem where multiplatform kernels panic on all but
  prima2 hardware."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: SAMSUNG: pm: Adjust for pinctrl- and DT-enabled platforms
  ARM: prima2: fix incorrect panic usage
  arm: mvebu: armada-xp-{gp,openblocks-ax3-4}: specify PCIe range
  ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant().
  ARM: omap3: clock: fix wrong container_of in clock36xx.c
  ARM: dts: OMAP5: Fix missing PWM capability to timer nodes
  ARM: dts: omap4-panda|sdp: Fix mux for twl6030 IRQ pin and msecure line
  ARM: dts: AM33xx: Fix properties on gpmc node
  arm: omap2: fix AM33xx hwmod infos for UART2
  ARM: OMAP3: Fix iva2_pwrdm settings for 3703