- 04 8月, 2011 2 次提交
-
-
由 Boaz Harrosh 提交于
When we have a situation that the number of pages we want to encode is bigger then the size of the bio. (Which can currently happen only when all IO is going to a single device .e.g group_width==1) then the IO is submitted short and we report back only the amount of bytes we actually wrote/read and all is fine. BUT ... There was a bug that the current length counter was advanced before the fail to add the extra page, and we come to a situation that the CDB length was one-page longer then the actual bio size, which is of course rejected by the osd-target. While here also fix the bio size calculation, in the case that we received more then one group of devices. CC: Stable Tree <stable@kernel.org> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Heiko Carstens 提交于
Fix this compile error on s390: CC [M] fs/nfs/blocklayout/blocklayout.o fs/nfs/blocklayout/blocklayout.c: In function 'bl_end_io_read': fs/nfs/blocklayout/blocklayout.c:201:4: error: implicit declaration of function 'prefetchw' Introduced with 9549ec01 "pnfsblock: bl_read_pagelist". Cc: Fred Isaman <iisaman@citi.umich.edu> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 8月, 2011 28 次提交
-
-
由 Al Viro 提交于
so we can pass &inode->i_mode to it Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Trond Myklebust 提交于
Fix two recently introduced compile problems: Fix a typo in fs/nfs/pnfs.h Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in struct nfs_server. Reported-by: NJens Axboe <jaxboe@fusionio.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peng Tao 提交于
For invalid extents, find other pages in the same fsblock and write them out. [pnfsblock: write_begin] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: NZhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> [SQUASHME: pnfsblock: mds_offset is set in the generic layer] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: NPeng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fixup blksize alignment in bl_setup_layoutcommit] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: NZhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: NPeng Tao <peng_tao@emc.com> [pnfsblock: read path error handling] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: handle errors when read or write pagelist.] Signed-off-by: NZhang Jingwang <yyalone@gmail.com> [pnfs-block: use new read_pagelist api] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In blocklayout driver. There are two things happening while layoutcommit/cleanup. 1. the modified extents are encoded. 2. On cleanup the extents are put back on the layout rw extents list, for reads. In the new system where actual xdr encoding is done in encode_layoutcommit() directly into xdr buffer, these are the new commit stages: 1. On setup_layoutcommit, the range is adjusted as before and a structure is allocated for communication with bl_encode_layoutcommit && bl_cleanup_layoutcommit (Generic layer provides a void-star to hang it on) 2. bl_encode_layoutcommit is called to do the actual encoding directly into xdr. The commit-extent-list is not freed and is stored on above structure. FIXME: The code is not yet converted to the new XDR cleanup 3. On cleanup the commit-extent-list is put back by a call to set_to_rw() as before, but with no need for XDR decoding of the list as before. And the commit-extent-list is freed. Finally allocated structure is freed. [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: NJim Rees <rees@umich.edu> [pnfsblock: introduce bl_committing list] Signed-off-by: NPeng Tao <peng_tao@emc.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [blocklayout: encode_layoutcommit implementation] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> [pnfsblock: fix bug setting up layoutcommit.] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> [pnfsblock: cleanup_layoutcommit wants a status parameter] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
In blocklayout driver. There are two things happening while layoutcommit/cleanup. 1. the modified extents are encoded. 2. On cleanup the extents are put back on the layout rw extents list, for reads. In the new system where actual xdr encoding is done in encode_layoutcommit() directly into xdr buffer, these are the new commit stages: 1. On setup_layoutcommit, the range is adjusted as before and a structure is allocated for communication with bl_encode_layoutcommit && bl_cleanup_layoutcommit (Generic layer provides a void-star to hang it on) 2. bl_encode_layoutcommit is called to do the actual encoding directly into xdr. The commit-extent-list is not freed and is stored on above structure. FIXME: The code is not yet converted to the new XDR cleanup 3. On cleanup the commit-extent-list is put back by a call to set_to_rw() as before, but with no need for XDR decoding of the list as before. And the commit-extent-list is freed. Finally allocated structure is freed. [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [blocklayout: encode_layoutcommit implementation] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> [pnfsblock: fix bug setting up layoutcommit.] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> [pnfsblock: prevent commit list corruption] [pnfsblock: fix layoutcommit with an empty opaque] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Adds working implementations of various support functions to handle INVAL extents, needed by writes, such as bl_mark_sectors_init and bl_is_sector_init. [pnfsblock: fix 64-bit compiler warnings for extent manipulation] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [Implement release_inval_marks] Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Implement bl_find_get_extent(), one of the core extent manipulation routines. [pnfsblock: Lookup list entry of layouts and tags in reverse order] Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> pnfsblock: fix print format warnings for sector_t and size_t gcc spews warnings about these on x86_64, e.g.: fs/nfs/blocklayout/blocklayout.c:74: warning: format ‘%Lu’ expects type ‘long long unsigned int’, but argument 2 has type ‘sector_t’ fs/nfs/blocklayout/blocklayout.c:388: warning: format ‘%d’ expects type ‘int’, but argument 5 has type ‘size_t’ Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
XDR decodes the block layout payload sent in LAYOUTGET result, storing the result in an extent list. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fix bug getting pnfs_layout_type in translate_devid().] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO for each device returned. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by: NJim Rees <rees@umich.edu> [pnfsblock: fix pnfs_deviceid references] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fix print format warnings for sector_t and size_t] [pnfs-block: #include <linux/vmalloc.h>] [pnfsblock: no PNFS_NFS_SERVER] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [pnfsblock: fix bug determining size of striped volume] [pnfsblock: fix oops when using multiple devices] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: get rid of vmap and deviceid->area structure] Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Replace a stub, so that extents underlying the layouts are properly added, merged, or ignored as necessary. Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: delete the new node before put it] Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfsblock: fix bug getting pnfs_layout_type in translate_devid().] Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NZhang Jingwang <Jingwang.Zhang@emc.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jim Rees 提交于
Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [upcall bugfixes] Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jim Rees 提交于
Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [upcall bugfixes] Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Adds structures and basic create/delete code for extents. Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NZhang Jingwang <Jingwang.Zhang@emc.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
[pnfsblock: use pnfs_generic_pg_init_read/write] Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Define a configuration variable to enable/disable compilation of the block driver code. Add the minimal structure for a pnfs block layout driver, and empty list-heads that will hold the extent data [pnfsblock: make NFS_V4_1 select PNFS_BLOCK] Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [pnfs-block: fix CONFIG_PNFS_BLOCK dependencies] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: SQUASHME: adjust to API change] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfs: move pnfs_layout_type inline in nfs_inode] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> [blocklayout: encode_layoutcommit implementation] Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: layout alloc and free] Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> [pnfs: move pnfs_layout_type inline in nfs_inode] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [pnfsblock: define module alias] Signed-off-by: NPeng Tao <peng_tao@emc.com> [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
This gives layout driver a chance to cleanup structures they put in at encode_layoutcommit. Signed-off-by: NAndy Adamson <andros@netapp.com> [fixup layout header pointer for layoutcommit] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Block layout needs it to determine IO size. Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NTao Guo <glorioustao@gmail.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
To allow layout driver to issue getdevicelist at mount time, and clean up at umount time. [fixup non NFS_V4_1 set_pnfs_layoutdriver definition] [pnfs: pass mntfh down the init_pnfs path] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The block driver uses GETDEVICELIST Signed-off-by: NAndy Adamson <andros@netapp.com> [pass struct nfs_server * to getdevicelist] [get machince creds for getdevicelist] [fix getdevicelist decode sizing] Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@tonian.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
Using NFS4_MAX_UINT64 will break current protocol. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
There can be multiple lseg per file, so layoutcommit should be able to handle it. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
No need to save it for every lseg. No need to save it at every pnfs_set_layoutcommit. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Peng Tao 提交于
No need to save it for every lseg. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: NPeng Tao <peng_tao@emc.com> Signed-off-by: NJim Rees <rees@umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 7月, 2011 2 次提交
-
-
由 Bryan Schumaker 提交于
Print out the name of the file that triggers the cookie loop message to make it slightly easier to track down the cause. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the directory contents change, then we have to accept that the file->f_pos value may shrink if we do a 'search-by-cookie'. In that case, we should turn off the loop detection and let the NFS client try to recover. The patch also fixes a second loop detection bug by ensuring that after turning on the ctx->duped flag, we read at least one new cookie into ctx->dir_cookie before attempting to match with ctx->dup_cookie. Reported-by: NPetr Vandrovec <petr@vandrovec.name> Cc: stable@kernel.org [2.6.39+] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 7月, 2011 3 次提交
-
-
由 Trond Myklebust 提交于
nfs_mark_return_delegation() is usually called without any locking, and so it is not safe to dereference delegation->inode. Since the inode is only used to discover the nfs_client anyway, it makes more sense to have the callers pass a valid pointer to the nfs_server as a parameter. Reported-by: NIan Kent <raven@themaw.net> Cc: stable@kernel.org Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
If the task that initiated the sillyrename ends up being killed by a fatal signal, then it will eventually return back to userspace and end up releasing the i_mutex. d_move however needs to be done while holding the i_mutex. Instead of using d_move here, just unhash the old and new dentries to prevent them from being found by lookups. With this change though, the dentries are now incorrect post-rename and do not reflect the actual name of the file on the server. I'm proceeding under the assumption that since they are unhashed that this isn't really a problem. In order for the sillydelete to still work though, the dname must be copied earlier when setting up the sillydelete info, and the name must be recopied if the sillydelete info has to be moved to a new dentry. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Al Viro 提交于
new helper: posix_acl_create(&acl, gfp, mode_p). Replaces acl with modified clone, on failure releases acl and replaces with NULL. Returns 0 or -ve on error. All callers of posix_acl_create_masq() switched. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 21 7月, 2011 2 次提交
-
-
由 Josef Bacik 提交于
Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Josef Bacik 提交于
This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 7月, 2011 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-