- 12 8月, 2015 1 次提交
-
-
由 Bruno Prémont 提交于
Add an extra set of registers which is necessary tu support the PMICs battery charger function, and mark registers which contain status bits, gpio status, and adc readings as volatile. Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 11 8月, 2015 8 次提交
-
-
由 Henry Chen 提交于
Implement .irq_set_wake() to get who is wakeup source and setup on suspend/reumse. Enable mt6393_irq as wake up source properly to pinctrl by enable_irq_wake()/enable_irq_wake(). Signed-off-by: NHenry Chen <henryc.chen@mediatek.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Steve Twiss 提交于
Fix a missing DVC_RDY interrupt mask in struct regmap_irq definition. The original submission of this driver did not contain all interrupt masking definitions in the struct regmap_irq contained in the file da9063-irq.c The solution is to add a DA9063_IRQ_DVC_RDY entry to enum da9063_irqs list and to add the corresponding values to compensate for the missing mask bit in the static const struct regmap_irq da9063_irqs[] table. Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: NAdam Ward <adam.ward.opensource@diasemi.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Michal Suchanek 提交于
The axp152 is a stripped down version of the axp202 pmic with the battery charging function removed as it is intended for top-set boxes. Signed-off-by: NMichal Suchanek <hramrach@gmail.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 S Twiss 提交于
Add MFD core driver support for DA9062 Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Richard Fitzgerald 提交于
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Vaibhav Hiremath 提交于
Instead of hard coding the shift for bit definition, use BIT() macro. Signed-off-by: NVaibhav Hiremath <vaibhav.hiremath@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Charles Keepax 提交于
Device tree and ACPI primarily deal with unsigned ints, many of the pdata members in the Arizona driver are signed ints but are only ever assigned positive values. Changing these pdata fields to unsigned ints avoids us having to choose between overly verbose code and Sparse warnings. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Matt Fleming 提交于
Intel Sunrisepoint (Skylake PCH) has the iTCO watchdog accessible across the SMBus, unlike previous generations of PCH/ICH where it was on the LPC bus. Because it's on the SMBus, it doesn't make sense to pass around a 'struct lpc_ich_info', and leaking the type of bus into the iTCO watchdog driver is kind of backwards anyway. This change introduces a new 'struct itco_wdt_platform_data' for use inside the iTCO watchdog driver and by the upcoming Intel Sunrisepoint code, which neatly avoids having to include lpc_ich headers in the i801 i2c driver. This change is overdue because lpc_ich_info has already found its way into other TCO watchdog users, notably the intel_pmc_ipc driver where the watchdog actually isn't on the LPC bus as far as I can see. A simple translation layer is provided for converting from the existing 'struct lpc_ich_info' inside the lpc_ich mfd driver. Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com> [drivers/x86 refactoring] Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 10 8月, 2015 1 次提交
-
-
由 Roger Quadros 提交于
Some palmas based chip variants do not have OTG based ID logic. For these variants we rely on GPIO based USB ID detection. These chips do have VBUS comparator for VBUS detection so we continue to use the old way of detecting VBUS. Signed-off-by: NRoger Quadros <rogerq@ti.com> Acked-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
-
- 05 8月, 2015 1 次提交
-
-
由 Fugang Duan 提交于
FEC requires additional bits to select refrence clock. Signed-off-by: NFugang Duan <B38611@freescale.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 17 7月, 2015 6 次提交
-
-
由 Krzysztof Kozlowski 提交于
Add MAX77843_MUIC prefix to some of the defines used in max77843 extcon driver so the max77693-private.h can be included simultaneously with max77843-private.h. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Add MAX77693 prefix to some of the defines used in max77693 extcon driver so the max77693-private.h can be included simultaneously with max77843-private.h. Additionally use BIT() macro in header. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Switch to the same definition of state container as in MAX77693 drivers. This will allow usage of one regulator driver in both devices: MAX77693 and MAX77843. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Krzysztof Kozlowski 提交于
This prepares for merging some of the drivers between max77693 and max77843 so the child MFD driver can be attached to any parent MFD main driver. Move the state container to common header file. Additionally add consistent 'i2c' prefixes to its members (of 'struct i2c_client' type). Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: NSebastian Reichel <sre@kernel.org> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Store the device type (obtained from i2c_device_id) as an enum and add a default type of unknown to distinguish from case when this is not set at all. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Krzysztof Kozlowski 提交于
Clean up the max77693 private header file by removing: 1. Left-overs from previous way of interrupt handling (driver uses regmap_irq_chip). 2. Unused members of struct 'max77693_dev' related to interrupts in extcon driver. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Acked-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 09 7月, 2015 1 次提交
-
-
由 Charles Keepax 提交于
This register will be needed as part of some additional support for the headphone path on wm5110, so this patch adds the register and sets up its regmap config. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 22 6月, 2015 5 次提交
-
-
由 Richard Fitzgerald 提交于
For the WM5102 there is a dependency in the core code on wm5102_patch() which only exists when CONFIG_MFD_WM5102 is defined. To avoid having to sprinkle #ifdefs around the code it is given an alternative empty stub version when CONFIG_MFD_WM5102 is deselected Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Richard Fitzgerald 提交于
Later arizona silicon has the single/differential selector in a different register, and IN1_MODE only selects between analogue or digital. Prepare for this by splitting the INx_MODE definition into two fields. Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Charles Keepax 提交于
Allow the chip to completely power off if we enter runtime suspend and there is no jack detection active. This is helpful for systems where system suspend might remove the supplies to the CODEC, without informing us. Note the powering off is done in runtime suspend rather than system suspend, because we need to hold reset until the first time DCVDD is powered anyway (which would be in runtime resume), and we might as well save the extra power. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
The defined struct max77686_opmode_data isn't used neither by the max77686 mfd driver nor the drivers for its sub-devices. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com> Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Krzysztof Kozlowski 提交于
Constify in various drivers configuration data which is not modified: - regmap_irq_chip, - individual regmap_irq's in array, - regmap_config, - irq_domain_ops, Signed-off-by: NKrzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 15 6月, 2015 6 次提交
-
-
由 Gwendal Grignou 提交于
Chromebooks can have more than one Embedded Controller so the cros_ec device id has to be incremented for each EC registered. Add a new structure to represent multiple EC as different char devices (e.g: /dev/cros_ec, /dev/cros_pd). It connects to cros_ec_device and allows sysfs inferface for cros_pd. Also reduce number of allocated objects, make chromeos sysfs class object a static and add refcounting to prevent object deletion while command is in progress. Signed-off-by: NGwendal Grignou <gwendal@chromium.org> Reviewed-by: NDmitry Torokhov <dtor@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Stephen Barber 提交于
Add proto v3 support to the SPI, I2C, and LPC. Signed-off-by: NStephen Barber <smbarber@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NGwendal Grignou <gwendal@chromium.org> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Stephen Barber 提交于
Add support in cros_ec.c to handle EC host command protocol v3. For v3+, probe for maximum shared protocol version and max request, response, and passthrough sizes. For now, this will always fall back to v2, since there is no bus-specific code for handling proto v3 packets. Signed-off-by: NStephen Barber <smbarber@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Stephen Barber 提交于
Update cros_ec_commands.h to the latest version in the EC firmware sources and add power domain and passthru commands. Also, update lightbar to use new command names. Signed-off-by: NStephen Barber <smbarber@chromium.org> Reviewed-by: NRandall Spangler <rspangler@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Reviewed-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NGwendal Grignou <gwendal@chromium.org> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
Commit 1b84f2a4 ("mfd: cros_ec: Use fixed size arrays to transfer data with the EC") modified the struct cros_ec_command fields to not use pointers for the input and output buffers and use fixed length arrays instead. This change was made because the cros_ec ioctl API uses that struct cros_ec_command to allow user-space to send commands to the EC and to get data from the EC. So using pointers made the API not 64-bit safe. Unfortunately this approach was not flexible enough for all the use-cases since there may be a need to send larger commands on newer versions of the EC command protocol. So to avoid to choose a constant length that it may be too big for most commands and thus wasting memory and CPU cycles on copy from and to user-space or having a size that is too small for some big commands, use a zero-length array that is both 64-bit safe and flexible. The same buffer is used for both output and input data so the maximum of these values should be used to allocate it. Suggested-by: NGwendal Grignou <gwendal@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NHeiko Stuebner <heiko@sntech.de> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Gwendal Grignou 提交于
Parent and device were pointing to the same device structure. Parent is unused, removed. Signed-off-by: NGwendal Grignou <gwendal@chromium.org> Tested-by: NStephen Barber <smbarber@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NGwendal Grignou <gwendal@chromium.org> Reviewed-by: NPuthikorn Voravootivat <puthik@chromium.org> Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 10 6月, 2015 1 次提交
-
-
由 Steve Twiss 提交于
This adds OnKey driver support for DA9063. Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 5月, 2015 1 次提交
-
-
由 Dmitry Torokhov 提交于
The STMPE MFD is only used with device tree configured systems (and STMPE MFD core depends on OF), so force the configuration to come from device tree only. Tested-by: NHeiner Kallweit <hkallweit1@gmail.com> Reviewed-by: NMarek Vasut <marex@denx.de> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 5月, 2015 1 次提交
-
-
由 Ramakrishna Pallala 提交于
This patch adds new power supply charger driver support for X-Power AXP288 PMIC integrated charger. This driver interfaces with the axp20x mfd driver as a cell and listens to extcon cable events for setting up charging. Signed-off-by: NRamakrishna Pallala <ramakrishna.pallala@intel.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NSebastian Reichel <sre@kernel.org>
-
- 20 5月, 2015 1 次提交
-
-
由 Boris Brezillon 提交于
The at91rm9200 SoC embeds a Memory Controller block which is used to configure several aspects of the platform: - AHB/APB Bus behavior - SDRAM Controller - EBI (External Bus Interface) and SMC (Static Memory Controller) config Those registers might be accessed by different drivers, hence we need to define it as a syscon device. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NLee Jones <lee.jones@linaro.org> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 19 5月, 2015 2 次提交
-
-
由 Inha Song 提交于
This patch add support for select accessory detect mode to HPDETL or HPDETR. Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins to measure the impedance of an external load connected to the headphone. Depending on board design, headphone detect pins can change to HPDETR or HPDETL. Signed-off-by: NInha Song <ideal.song@samsung.com> Acked-by: NLee Jones <lee@kernel.org> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
-
由 Ramakrishna Pallala 提交于
This patch adds the extcon support for AXP288 PMIC which has the BC1.2 charger detection capability. Additionally it also adds the USB mux switching support b/w SOC and PMIC based on GPIO control. Signed-off-by: NRamakrishna Pallala <ramakrishna.pallala@intel.com> Acked-by: NLee Jones <lee.jones@linaro.org> [cw00.choi: Modify the log message to keep the consistent log message pattern] Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
-
- 13 5月, 2015 1 次提交
-
-
由 Boris BREZILLON 提交于
Add support for the AXP22x PMIC devices to the existing AXP20x driver. This includes the AXP221 and AXP223, which are identical except for the external data bus. Only AXP221 is added for now. AXP223 will be added after it's Reduced Serial Bus (RSB) interface is supported. AXP22x defines a new set of registers, power supplies and regulators, but most of the API is similar to the AXP20x ones. A new irq chip definition is used, even though the available interrupts on AXP22x is a subset of those on AXP20x. This is done so the interrupt numbers match those on the datasheet. This patch only enables the interrupts, system power-off function, and PEK sub-device. The regulator driver must first support different variants before we enable it from the mfd driver. Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com> [wens@csie.org: fix interrupts and move regulators to separate patch] Signed-off-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 17 4月, 2015 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The S2MPS13 RTC is almost the same as S2MPS14. The differences when updating alarm are: 1. Set WUDR+AUDR field instead of WUDR+RUDR. 2. Clear the AUDR field later (it is not auto-cleared). Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 4月, 2015 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The RTC on S2MPS11 is the same as S2MPS14. However interrupt numbers of RTC alarms 0 and 1 were inversed between these two devices. So when rtc-s5m driver requested S2MPS14_IRQ_RTCA0 interrupt, it matched to S2MPS11_IRQ_RTCA1, not RTCA0. Fix this by using consistent RTC alarm interrupt numbers and adding a BUILD_BUG_ON for future generations. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 04 4月, 2015 1 次提交
-
-
由 Linus Walleij 提交于
This driver can only get its platform data from the device tree, and all platforms using it do that. Localize the platform data for the keypad. A later patch will enforce the device tree / OF dependence. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 30 3月, 2015 1 次提交
-
-
由 Aaro Koskinen 提交于
Drop support for SW controlled VCORE, nobody uses it. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-