- 09 11月, 2013 1 次提交
-
-
由 Chen Gang 提交于
do_blk_trace_setup() will fully initialize 'buts.name', so can remove the related memcpy(). And also use BLKTRACE_BDEV_SIZE and ARRAY_SIZE instead of hard code number '32'. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 08 11月, 2013 1 次提交
-
-
由 Jan Kara 提交于
Currently each task sends BLK_TN_PROCESS event to the first traced device it interacts with after a new trace is started. When there are several traced devices and the task accesses more devices, this logic can result in BLK_TN_PROCESS being sent several times to some devices while it is never sent to other devices. Thus blkparse doesn't display command name when parsing some blktrace files. Fix the problem by sending BLK_TN_PROCESS event to all traced devices when a task interacts with any of them. Signed-off-by: NJan Kara <jack@suse.cz> Review-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 4月, 2013 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 3a366e61. Wanlong Gao reports that it causes a kernel panic on his machine several minutes after boot. Reverting it removes the panic. Jens says: "It's not quite clear why that is yet, so I think we should just revert the commit for 3.9 final (which I'm assuming is pretty close). The wifi is crap at the LSF hotel, so sending this email instead of queueing up a revert and pull request." Reported-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Requested-by: NJens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 1月, 2013 1 次提交
-
-
由 Tejun Heo 提交于
bio completion didn't kick block_bio_complete TP. Only dm was explicitly triggering the TP on IO completion. This makes block_bio_complete TP useless for tracers which want to know about bios, and all other bio based drivers skip generating blktrace completion events. This patch makes all bio completions via bio_endio() generate block_bio_complete TP. * Explicit trace_block_bio_complete() invocation removed from dm and the trace point is unexported. * @rq dropped from trace_block_bio_complete(). bios may fly around w/o queue associated. Verifying and accessing the assocaited queue belongs to TP probes. * blktrace now gets both request and bio completions. Make it ignore bio completions if request completion path is happening. This makes all bio based drivers generate blktrace completion events properly and makes the block_bio_complete TP actually useful. v2: With this change, block_bio_complete TP could be invoked on sg commands which have bio's with %NULL bi_bdev. Update TP assignment code to check whether bio->bi_bdev is %NULL before dereferencing. Signed-off-by: NTejun Heo <tj@kernel.org> Original-patch-by: NNamhyung Kim <namhyung@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 13 10月, 2012 1 次提交
-
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: NJoe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 8月, 2011 1 次提交
-
-
由 Namhyung Kim 提交于
Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or FUA follows WRITE, use the same 'F' flag for both cases and distinguish them by their (relative) position. The end results look like (other flags might be shown also): - WRITE: W - WRITE_FLUSH: FW - WRITE_FUA: WF - WRITE_FLUSH_FUA: FWF Note that we reuse TC_BARRIER due to lack of bit space of act_mask so that the older versions of blktrace tools will report flush requests as barriers from now on. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Reviewed-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 14 6月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Use the compiler to verify format strings and arguments. Fix fallout. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 13 6月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Use the compiler to verify format strings and arguments. Fix fallout. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 03 3月, 2011 1 次提交
-
-
由 Tao Ma 提交于
If we enable trace events to trace block actions, We use blk_fill_rwbs_rq to analyze the corresponding actions in request's cmd_flags, but we only choose the minor 2 bits from it, so most of other flags(e.g, REQ_SYNC) are missing. For example, with a sync write we get: write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + = 8 [write_test] Since now we have integrated the flags of both bio and request, it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and blk_fill_rwbs_rq isn't needed any more. With this patch, after a sync write we get: write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 += 8 [write_test] Signed-off-by: NTao Ma <boyu.mt@taobao.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 08 8月, 2010 3 次提交
-
-
由 Stephen Rothwell 提交于
block/compat_ioctl.c: In function 'compat_blkdev_ioctl': block/compat_ioctl.c:754: error: 'BLKTRACESETUP32' undeclared (first use in this function) Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Arnd Bergmann 提交于
The blktrace driver currently needs the BKL, but we should not need to take that in the block layer, so just push it down into the driver itself. It is quite likely that the BKL is not actually required in blktrace code and could be removed in a follow-on patch. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Christoph Hellwig 提交于
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in struct requests. This allows much easier grepping for different request types instead of unwinding through macros. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 17 2月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
Add __percpu sparse annotations to core subsystems. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-mm@kvack.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dipankar Sarma <dipankar@in.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Biederman <ebiederm@xmission.com>
-
- 02 10月, 2009 3 次提交
-
-
由 Jun'ichi Nomura 提交于
Since 2.6.31 now has request-based device-mapper, it's useful to have a tracepoint for request-remapping as well as bio-remapping. This patch adds a tracepoint for request-remapping, trace_block_rq_remap(). Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jun'ichi Nomura 提交于
Since 2.6.31 now has request-based device-mapper, it's useful to have a tracepoint for request-remapping as well as bio-remapping. This patch adds a tracepoint for request-remapping, trace_block_rq_remap(). Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Zdenek Kabelac 提交于
Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs introduced in commit 1d54ad6d. Release kobject also in case the request_fn is NULL. Problem was noticed via kmemleak backtrace when some sysfs entries were note properly destroyed during device removal: unreferenced object 0xffff88001aa76640 (size 80): comm "lvcreate", pid 2120, jiffies 4294885144 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 f0 65 a7 1a 00 88 ff ff .........e...... 90 66 a7 1a 00 88 ff ff 86 1d 53 81 ff ff ff ff .f........S..... backtrace: [<ffffffff813f9cc6>] kmemleak_alloc+0x26/0x60 [<ffffffff8111d693>] kmem_cache_alloc+0x133/0x1c0 [<ffffffff81195891>] sysfs_new_dirent+0x41/0x120 [<ffffffff81194b0c>] sysfs_add_file_mode+0x3c/0xb0 [<ffffffff81197c81>] internal_create_group+0xc1/0x1a0 [<ffffffff81197d93>] sysfs_create_group+0x13/0x20 [<ffffffff810d8004>] blk_trace_init_sysfs+0x14/0x20 [<ffffffff8123f45c>] blk_register_queue+0x3c/0xf0 [<ffffffff812447e4>] add_disk+0x94/0x160 [<ffffffffa00d8b08>] dm_create+0x598/0x6e0 [dm_mod] [<ffffffffa00de951>] dev_create+0x51/0x350 [dm_mod] [<ffffffffa00de823>] ctl_ioctl+0x1a3/0x240 [dm_mod] [<ffffffffa00de8f2>] dm_compat_ctl_ioctl+0x12/0x20 [dm_mod] [<ffffffff81177bfd>] compat_sys_ioctl+0xcd/0x4f0 [<ffffffff81036ed8>] sysenter_dispatch+0x7/0x2c [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: NZdenek Kabelac <zkabelac@redhat.com> Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 10 6月, 2009 2 次提交
-
-
由 Li Zefan 提交于
Fix building failures when CONFIG_BLOCK == n. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2F1520.8020003@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 06 5月, 2009 1 次提交
-
-
由 Alan D. Brunelle 提交于
This attempts to clarify names utilized during block I/O remap operations (partition, volume manager). It correctly matches up the /from/ information for both device & sector. This takes in the concept from Kosaki Motohiro and extends it to include better naming for the "device_from" field. [ Impact: cleanup ] Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com> Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <49FF4FAE.3000301@hp.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 4月, 2009 2 次提交
-
-
由 Li Zefan 提交于
Impact: allow ftrace-plugin blktrace to trace device-mapper devices To trace a single partition: # echo 1 > /sys/block/sda/sda1/enable To trace the whole sda instead: # echo 1 > /sys/block/sda/enable Thus we also fix an issue reported by Ted, that ftrace-plugin blktrace can't be used to trace device-mapper devices. Now: # echo 1 > /sys/block/dm-0/trace/enable echo: write error: No such device or address # mount -t ext4 /dev/dm-0 /mnt # echo 1 > /sys/block/dm-0/trace/enable # echo blk > /debug/tracing/current_tracer Reported-by: NTheodore Tso <tytso@mit.edu> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Shawn Du <duyuyang@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> LKML-Reference: <49E42665.6020506@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Shawn Du 提交于
Though one can specify '-d /dev/sda1' when using blktrace, it still traces the whole sda. To support per-partition tracing, when we start tracing, we initialize bt->start_lba and bt->end_lba to the start and end sector of that partition. Note some actions are per device, thus we don't filter 0-sector events. The original patch and discussion can be found here: http://marc.info/?l=linux-btrace&m=122949374214540&w=2Signed-off-by: NShawn Du <duyuyang@gmail.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> LKML-Reference: <49E42620.4050701@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 2月, 2009 1 次提交
-
-
由 Jens Axboe 提交于
We can't OR shift values, so get rid of BIO_RW_SYNC and use BIO_RW_SYNCIO and BIO_RW_UNPLUG explicitly. This brings back the behaviour from before 213d9417. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 31 1月, 2009 1 次提交
-
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make headers_check' warning: usr/include/linux/blktrace_api.h:96: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
-
- 27 1月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Also make sure sparse (make C=2 block/blktrace.o) is happy too. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 11月, 2008 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This was a forward port of work done by Mathieu Desnoyers, I changed it to encode the 'what' parameter on the tracepoint name, so that one can register interest in specific events and not on classes of events to then check the 'what' parameter. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 10月, 2008 1 次提交
-
-
由 Stefan Raspl 提交于
This patch adds the new api call blk_add_driver_data() to blktrace. It allows to trace device driver-specific binary data. Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: NMartin Peschke <mp3@de.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 09 10月, 2008 4 次提交
-
-
由 Jens Axboe 提交于
Define as 32, which is is what BDEVNAME_SIZE is/was as well. This keeps the user interface the same and gets rid of the difference between kernel and user api here. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Sven Schuetz 提交于
This header file is of interest for user space programming, i.e. for tools that process blktrace data. We would like to use it for a tool on-top of blktrace which processes data provided by blktrace. For this purpose, it would be helpful if the blktrace API would make it to /usr/include/linux. The git tree for the blktrace tools comes with its own copy of this header file. I didn't manage to replace that copy with the file generated by the patch below yet. A few more cleanups would be needed. For example, the blktrace ioctl numbers, which are currently defined in usr/include/fs.h, might need to be moved. Should be feasible, though. Signed-off-by: NSven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by: NMartin Peschke <mp3@de.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Mike Anderson 提交于
Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 03 7月, 2008 1 次提交
-
-
由 Alan D. Brunelle 提交于
This allows a user to annotate the blk trace stream: writing a suitable message to {/sys/kernel/debug}/block/<dsf>/msg will have it propagated into the trace stream. Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 28 5月, 2008 2 次提交
-
-
由 Jens Axboe 提交于
Currently it uses a single static char array, but that risks being corrupted when multiple users issue message notes at the same time. Make the buffers dynamically allocated when the trace is setup and make them per-cpu instead. The default max message size of 1k is also very large, the interface is mainly for small text notes. So shrink it to 128 bytes. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Alan D. Brunelle 提交于
Allows messages to be inserted into blktrace streams. Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 30 1月, 2008 1 次提交
-
-
由 Martin K. Petersen 提交于
request_queue_t is deprecated Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 28 1月, 2008 1 次提交
-
-
由 Christof Schmitt 提交于
Since the SCSI layer uses the request queues from the block layer, blktrace can also be used to trace the requests to all SCSI devices (like SCSI tape drives), not only disks. The only missing part is the ioctl interface to start and stop tracing. This patch adds the SETUP, START, STOP and TEARDOWN ioctls from blktrace to the sg device files. With this change, blktrace can be used for SCSI devices like for disks, e.g.: blktrace -d /dev/sg1 -o - | blkparse -i - Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 12 10月, 2007 2 次提交
-
-
由 Jens Axboe 提交于
We don't have the request queue definition, so just make it a macro instead. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Boaz Harrosh 提交于
I get a compilation error in sglist-arch branch with BLK_DEV_IO_TRACE=n: CC block/compat_ioctl.o /usr0/export/dev/bharrosh/git/pub/linux-2.6-block/block/compat_ioctl.c: In function ?compat_blk_trace_setup?: /usr0/export/dev/bharrosh/git/pub/linux-2.6-block/block/compat_ioctl.c:568: error: expected expression before ?do? make[2]: *** [block/compat_ioctl.o] Error 1 Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 10 10月, 2007 1 次提交
-
-
由 Arnd Bergmann 提交于
blk_trace_setup is broken on x86_64 compat systems, this makes the code work correctly on all 64 bit architectures in compat mode. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 12 8月, 2007 1 次提交
-
-
由 Alan D. Brunelle 提交于
This patch provides more information concerning REMAP operations on block IOs. The additional information provides clearer details at the user level, and supports post-processing analysis in btt. o Adds in partition remaps on the same device. o Fixed up the remap information in DM to be in the right order o Sent up mapped-from and mapped-to device information Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-