- 03 5月, 2009 13 次提交
-
-
由 Ivan Kokshaysky 提交于
These platforms got broken after u64 => 'long long' conversion. Apparently that change was compile-tested with 'make allmodconfig', but it doesn't include systems that depend on !ALPHA_LEGACY_START_ADDRESS. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Bader 提交于
Uwe Geuder noted that he gets random bitmaps on a text console if he tried to type extended characters (like the e acute). For him everything above unicode 0xa0 was corrupted. After some digging there seems to be a little culprit in vgacon since the beginning of ages (well git). The function vgacon_font_get will store the number of characters correctly in font->charcount but then calls to vgacon_do_font_op(..., 0, 0). Which means only the lower 256 characters are actually stored to the fontdata. The rest is left untouched. So the next time that saved data is used, the garbled font appears. This happens on every switch between text consoles. Addresses https://bugs.launchpad.net/ubuntu/+source/linux/+bug/355057Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Tested-by: NUwe Geuder <ubuntuLp-ugeuder@sneakemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daisuke Nishimura 提交于
Current mem_cgroup_shrink_usage() has two problems. 1. It doesn't call mem_cgroup_out_of_memory and doesn't update last_oom_jiffies, so pagefault_out_of_memory invokes global OOM. 2. Considering hierarchy, shrinking has to be done from the mem_over_limit, not from the memcg which the page would be charged to. mem_cgroup_try_charge_swapin() does all of these things properly, so we use it and call cancel_charge_swapin when it succeeded. The name of "shrink_usage" is not appropriate for this behavior, so we change it too. Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.cn> Cc: Paul Menage <menage@google.com> Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vitaly Mayatskikh 提交于
The intention of commit aae8679b ("pagemap: fix bug in add_to_pagemap, require aligned-length reads of /proc/pid/pagemap") was to force reads of /proc/pid/pagemap to be a multiple of 8 bytes, but now it allows to read 0 bytes, which actually puts some data to user's buffer. According to POSIX, if count is zero, read() should return zero and has no other results. Signed-off-by: NVitaly Mayatskikh <v.mayatskih@gmail.com> Cc: Thomas Tuttle <ttuttle@google.com> Acked-by: NMatt Mackall <mpm@selenic.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Change page_mkwrite to allow implementations to return with the page locked, and also change it's callers (in page fault paths) to hold the lock until the page is marked dirty. This allows the filesystem to have full control of page dirtying events coming from the VM. Rather than simply hold the page locked over the page_mkwrite call, we call page_mkwrite with the page unlocked and allow callers to return with it locked, so filesystems can avoid LOR conditions with page lock. The problem with the current scheme is this: a filesystem that wants to associate some metadata with a page as long as the page is dirty, will perform this manipulation in its ->page_mkwrite. It currently then must return with the page unlocked and may not hold any other locks (according to existing page_mkwrite convention). In this window, the VM could write out the page, clearing page-dirty. The filesystem has no good way to detect that a dirty pte is about to be attached, so it will happily write out the page, at which point, the filesystem may manipulate the metadata to reflect that the page is no longer dirty. It is not always possible to perform the required metadata manipulation in ->set_page_dirty, because that function cannot block or fail. The filesystem may need to allocate some data structure, for example. And the VM cannot mark the pte dirty before page_mkwrite, because page_mkwrite is allowed to fail, so we must not allow any window where the page could be written to if page_mkwrite does fail. This solution of holding the page locked over the 3 critical operations (page_mkwrite, setting the pte dirty, and finally setting the page dirty) closes out races nicely, preventing page cleaning for writeout being initiated in that window. This provides the filesystem with a strong synchronisation against the VM here. - Sage needs this race closed for ceph filesystem. - Trond for NFS (http://bugzilla.kernel.org/show_bug.cgi?id=12913). - I need it for fsblock. - I suspect other filesystems may need it too (eg. btrfs). - I have converted buffer.c to the new locking. Even simple block allocation under dirty pages might be susceptible to i_size changing under partial page at the end of file (we also have a buffer.c-side problem here, but it cannot be fixed properly without this patch). - Other filesystems (eg. NFS, maybe btrfs) will need to change their page_mkwrite functions themselves. [ This also moves page_mkwrite another step closer to fault, which should eventually allow page_mkwrite to be moved into ->fault, and thus avoiding a filesystem calldown and page lock/unlock cycle in __do_fault. ] [akpm@linux-foundation.org: fix derefs of NULL ->mapping] Cc: Sage Weil <sage@newdream.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
On a linux-next allyesconfig build: kernel/trace/ring_buffer.c:1726: warning: passing argument 1 of 'atomic_cmpxchg' from incompatible pointer type linux-next/arch/s390/include/asm/atomic.h:112: note: expected 'struct atomic_t *' but argument is of type 'struct atomic64_t *' atomic_long_cmpxchg and atomic_long_xchg are incorrectly defined for 64 bit architectures. They should be mapped to the atomic64_* variants. Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
drivers/serial/crisv10.c:4428: error: unknown field 'read_proc' specified in initializer Commit 0f043a81 ("proc tty: remove struct tty_operations::read_proc") removes the read_proc entry from struct tty_operations. Rework the proc handling in the CRISv10 serial driver to use proc_fops instead. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add Roland and Oleg as formal ptrace maintainers, they've been doing the job for a while. Includes the file patterns requested by Joe. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NRoland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daisuke Nishimura 提交于
This is a bugfix for commit 3c776e64 ("memcg: charge swapcache to proper memcg"). Used bit of swapcache is solid under page lock, but considering move_account, pc->mem_cgroup is not. We need lock_page_cgroup() anyway. Signed-off-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Florian Fainelli 提交于
I will finish school soon, so replace my student address with this one. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ian Kent 提交于
Fix an obvious incorrect return status in autofs4_mount_busy(). Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
By the time the memory cgroup code is notified about a swapin we already hold a reference on the fault page. If the cgroup callback fails make sure to unlock AND release the page reference which was taken by lookup_swap_cach(), or we leak the reference. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Reviewed-by: NMinchan Kim <minchan.kim@gmail.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert Moore 提交于
acpi_rs_get_pci_routing_table_length is not performing sufficient validation on the package returned from _PRT. It assumes a package of packages and fails/faults if this is not the case. We should validate each subpackage when extracted from the parent package, and not accept objects of the wrong type, since that will just cause the scanning to fail (likely with a kernel oops). This can only happen with a serious BIOS bug, and is accompanied by a warning something like this: ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 4月, 2009 13 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Fix min function comparison warning ecryptfs: fix printk format warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect. V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM V4L/DVB (11570): patch: s2255drv: fix race condition on set mode V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error V4L/DVB (11561a): move media after i2c V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak V4L/DVB (11494a): cx231xx Kconfig fixes V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers
-
由 Devin Heitmueller 提交于
A regression was introduced in hg changeset 33810c734a0d, which resulted in a kernel panic whenever the device was disconnected from USB. The call to 4l2_device_register() was overwriting the pointer for usb_set_intfdata(), so when au0828_usb_disconnect() was called, the usb_get_intfdata() returned a pointer to the v4l2_device instead of the au0828_dev structure. Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Christopher Pascoe 提交于
Two fixes for DViCO FusionHDTV DVB-T Dual Express: * Reset correct tuner when reinitializing xc3028. * Disable the I2C gate control to avoid locking up the I2C bus. Tested-by: NJohn Knops <jknops@australiaonline.net.au> Reviewed-by: NSteven Toth <stoth@linuxtv.org> Signed-off-by: NChristopher Pascoe <linuxdvb@itee.uq.edu.au> Signed-off-by: NDevin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dean Anderson 提交于
set_modeready flag must be set before command sent to USB in s2255_write_config. Signed-off-by: NDean Anderson <dean@sensoray.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean Delvare 提交于
* Return actual error values as returned by the i2c subsystem, rather than 0 or 1. * If the registration of the second bus fails, unregister the first one before exiting, otherwise we are leaking resources. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Currently drivers/media drivers are linked very early - directly after base, block, misc, and mfd and before ata, scsi, ide, input, firewire, usb, and i2c. This breaks static build of video4linux drivers, that use generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because during video4linux probing the v4l2-subdev core requires a struct i2c_adapter context, which cannot be satisfied before the i2c subsystem is initialised. Moving drivers/media after drivers/i2c fixes this problem. The best way to trigger action is by submitting a patch:-) So, let's see what comes out of it - on the one hand I don't see any reason why media has to be linked this early, and nobody was able to give me one yesterday as this problem has been discussed on linux-media, OTOH, maybe indeed it would be better to move i2c the whole way up above media, but that'd be much bigger of a change, I think. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dan Carpenter 提交于
I lowered the kfree(t) down a couple lines and removed the superflous "t->vdev = NULL;" Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dan Carpenter 提交于
I moved the kfree() down a couple lines. t->vdev is going to be in freed memory so there is no point setting it to NULL. I added a kfree(t) on a Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
selecting ALSA module breaks if !SND. Just remove select. While here, let's fix the whitespacing at the Kconfig. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
A late v4l2_subdev framework change accidentally sent the audio input routing value to the external multiplexer, instead of the muxer input routing value to the external multiplexer. This change corrects that error. Signed-off-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 4月, 2009 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits) e100: do not go D3 in shutdown unless system is powering off netfilter: revised locking for x_tables Bluetooth: Fix connection establishment with low security requirement Bluetooth: Add different pairing timeout for Legacy Pairing Bluetooth: Ensure that HCI sysfs add/del is preempt safe net: Avoid extra wakeups of threads blocked in wait_for_packet() net: Fix typo in net_device_ops description. ipv4: Limit size of route cache hash table Add reference to CAPI 2.0 standard Documentation/isdn/INTERFACE.CAPI update Documentation/isdn/00-INDEX ixgbe: Fix WoL functionality for 82599 KX4 devices veth: prevent oops caused by netdev destructor xfrm: wrong hash value for temporary SA forcedeth: tx timeout fix net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE mlx4_en: Handle page allocation failure during receive mlx4_en: Fix cleanup flow on cq activation vlan: update vlan carrier state for admin up/down netfilter: xt_recent: fix stack overread in compat code ...
-
After experimenting with kexec with the last merges after 2.6.29, I've had some problems when probing e100. It would not read the eeprom. After some bisects, I realized this has been like that since forever (at least 2.6.18). The problem is that shutdown is doing the same thing that suspend does and puts the device in D3 state. I couldn't find a way to get the device back to a sane state in the probe function. So, based on some similar patches from Rafael J. Wysocki for e1000, e1000e, and ixgbe, I wrote this one for e100. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The x_tables are organized with a table structure and a per-cpu copies of the counters and rules. On older kernels there was a reader/writer lock per table which was a performance bottleneck. In 2.6.30-rc, this was converted to use RCU and the counters/rules which solved the performance problems for do_table but made replacing rules much slower because of the necessary RCU grace period. This version uses a per-cpu set of spinlocks and counters to allow to table processing to proceed without the cache thrashing of a global reader lock and keeps the same performance for table updates. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix up error path leak in i915_cmdbuffer drm/i915: fix unpaired i915 device mutex on entervt failure. drm/i915: add support for G41 chipset drm/i915: Enable ASLE if present drm/i915: Unregister ACPI video driver when exiting drm/i915: Register ACPI video even when not modesetting drm/i915: fix transition to I915_TILING_NONE drm/i915: Don't let an oops get triggered from irq_emit without dma init. drm/i915: allow tiled front buffers on 965+
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (21 commits) RDMA/nes: Update iw_nes version RDMA/nes: Fix error path in nes_accept() RDMA/nes: Fix hang issues for large cluster dynamic connections RDMA/nes: Increase rexmit timeout interval RDMA/nes: Check for sequence number wrap-around RDMA/nes: Do not set apbvt entry for loopback RDMA/nes: Fix unused variable compile warning when INFINIBAND_NES_DEBUG=n RDMA/nes: Fix fw_ver in /sys RDMA/nes: Set trace length to 1 inch for SFP_D RDMA/nes: Enable repause timer for port 1 RDMA/nes: Correct CDR loop filter setting for port 1 RDMA/nes: Modify thermo mitigation to flip SerDes1 ref clk to internal RDMA/nes: Fix resource issues in nes_create_cq() and nes_destroy_cq() RDMA/nes: Remove root_256()'s unused pbl_count_256 parameter mlx4_core: Fix memory leak in mlx4_enable_msi_x() IB/mthca: Fix timeout for INIT_HCA and a few other commands RDMA/cxgb3: Don't zero QP attrs when moving to IDLE RDMA/nes: Fix bugs in nes_reg_phys_mr() RDMA/nes: Fix compiler warning at nes_verbs.c:1955 IPoIB: Disable NAPI while CQ is being drained ...
-
由 Geert Uytterhoeven 提交于
Fix this: arch/m68k/kernel/sun3-head.S: Assembler messages: arch/m68k/kernel/sun3-head.S:32: Error: Unknown operator -- statement `__head' ignored Introduced by commit 6f335cab ("m68k: convert to use __HEAD and HEAD_TEXT macros."), which started using __HEAD without adding the appropriate include. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: bio: fix memcpy corruption in bio_copy_user_iov() hd: fix locking mg_disk: fix CONFIG_LBD=y warning mg_disk: fix locking
-
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Fix default constraints for fixed voltage regulators regulator/bq24022: fix bug in is_enabled function regulator/virtual: fix strings compare predicates regulator core: fix double-free in regulator_register() error path drivers/regulator: fix when type is different from REGULATOR_VOLTAGE or REGULATOR_CURRENT unreachable code in drms_uA_update() regulator: fix header file missing kernel-doc
-
由 Roland Dreier 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc/ps3: Fix build error on UP powerpc/cell: Select PCI for IBM_CELL_BLADE AND CELLEB powerpc: ppc32 needs elf_read_implies_exec() powerpc/86xx: Add device_type entry to soc for ppc9a powerpc/44x: Correct memory size calculation for denali-based boards maintainers: Fix PowerPC 4xx git tree powerpc: fix for long standing bug noticed by gcc 4.4.0 Revert "powerpc: Add support for early tlbilx opcode"
-
由 Tim Abbott 提交于
Commit edada399 broke the build on 64-bit powerpc because it moved the __ftr_alt_* sections of a file away from the .text section, causing link failures due to relative conditional branch targets being too far away from the branch instructions. This happens on pretty much all 64-bit powerpc configs. This change reverts commit edada399 while preserving the update from the *.refok sections to .ref.text that has happened since. Signed-off-by: NTim Abbott <tabbott@mit.edu> Requested-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
st driver uses blk_rq_map_user() in order to just build a request out of page frames. In this case, map_data->offset is a non zero value and iov[0].iov_base is NULL. We need to increase nr_pages for that. Cc: stable@kernel.org Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Tejun Heo 提交于
hd dance around local irq and HD_IRQ enable without achieving much. It ends up transferring data from irq handler with both local irq and HD_IRQ disabled. The only place it actually does something is while transferring the first block of a request which it does with HD_IRQ disabled but local irq enabled. Unfortunately, the dancing is horribly broken from locking POV. IRQ and timeout handlers access block queue without grabbing the queue lock and running the driver in SMP configuration crashes the whole machine pretty quickly. Remove meaningless irq enable/disable dancing and add proper locking in issue, irq and timeout paths. Signed-off-by: NTejun Heo <tj@kernel.org>
-