Use device tree information to setup IO_APIC configuration, interrupt
routing, HPET and everything else which cannot be enumerated by other
means.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

History:
v1..v2:
- dropped device_type except for cpu & pci. I have the compatible string
  for pci so I can drop the device_type once it is possible
- I lowercased all compatible types. I will need to resend some patches
  which have upper case intel
- The cpu had the same compatible string as the soc node. So I added to
  the soc node -immr for internel memory mapped registers.
- I added generic names for all parts.
- I reworked the i2c bars matching the way you suggested. I added a
  compatible node for the PCI device which only the PCI ids in its
  compatible string. The bars (each represents a complete i2c
  controller) have a "intel,ce4100-i2c-controller" compatible node. It
  is not used by the driver.
  The driver is probed via PCI ids (by the pci subsystem not OF) and
  matches the bar address against the ressource in the child node. Once
  there is a hit the node is attached.
- The SPI driver is also probed via pci. However I also attached a
  compatible property based on PCI ids

v2..v3:
- intel,ce4100-immr become intel,ce4100-cp. cp stands for core
  peripherals. The Atom data sheet talks here about ACPI devices. Since
  we don't have ACPI this does not apply here.
- The interrupt map is gone. There are now plenty of device nodes.
- The "unit address string" got fixed, it uses not DD,V format.

v3..v4:
- added descriptions for compatible nodes introduced here:
  - intel,ce4100-ioapic
  - intel,ce4100-lapic
  - intel,ce4100-hpet
  - intel,ce4100
  - intel,ce4100-cp
  - intel,ce4100-pci
- added a description about I2C controller magic.
- Added gpio-controller and gpio-cells property to gpio devices. Those
  properties are not (yet) used.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch enables the UART on the CE4100. The UART has a couple of
issues that need to be worked around. First the UART is mostly PC
compatible except that it is clocked eight times faster than a
standard PC so the default configuration provided in
arch/x86/include/asm/serial.h needs to be overridden. Second the TX
interrupt may not be set correctly all the time. Lastly accessing the
UART via I/O space for early_prink() hangs the chip when the IOAPIC is
enabled.

A custom mem_serial_in() is provided to work around the TX interrupt
issue. The configuration issues are dealt with in the call back
registered with the 8250 driver via serial8250_set_isa_configurator()
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add CE4100 platform support. CE4100 needs early setup like
moorestown.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>