- 15 4月, 2010 1 次提交
-
-
由 Joerg Schirottke 提交于
Added the matching model for Clevo laptop M570U. Signed-off-by: NJoerg Schirottke <master@kanotix.com> Tested-by: NMaximilian Gerhard <maxbox@directbox.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
A few enhancement / fixes for fix-up table of some Realtek codecs: - Apply fix-ups only for the auto model - Apply additional verbs after normal init verbs - Add a debug print to show the fix-up application This is basically a preliminary work for the next fix for Sony VAIO. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 4月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
The widget connections of ADC of ALC880 and ALC2260 aren't initialized, thus it might point to invalid pin. This can be a problem when mode=auto and there is only one input pin. Then user can't change the connection at all. This patch adds the code to initialize the input pin connection of these codecs. Reference: Novell bnc#594363 https://bugzilla.novell.com/show_bug.cgi?id=594363Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Corrected HP and mic pins for ALC269vb amic and dmic models. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
ALC269vb has an alternative HP pin 0x21 in addition. Fix the parser to recognize it. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2010 1 次提交
-
-
由 Maurus Cuelenaere 提交于
This adds support for the Medion WIM2160 soundcard. There's no PCI quirk added because it has the same PCI id as the Medion MD2. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
The commit 6a4f2ccb introduced a wrong comparision for the array range check, which effectively skips the whole initialization of DAC connections. Fixed now. Reference: bko#15689 https://bugzilla.kernel.org/show_bug.cgi?id=15689Reported-by: NAdrian Ulrich <kernel@blinkenlights.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
After more tests it appears that EAPD needs to be enabled on both the 0x14 and 0x15 NIDs to enable the main speaker and headphone amplifiers. The maximum volume setting is now equal to what the machine achieves under other operating systems. Disabling Front or LFE playback triggers EAPD and disables the amplifier. As such, these two playback switches have been removed from the mixer. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 3月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
ALC269 codec has a few different variants, and each of them may have different ADC and MUX widgets. For example, one model has ADC 0x08 with MUX 0x23 while others has ADC 0x09 or ADC 0x07 with MUX 022 or 0x24. The difference of ADC appears usually as the capability of the digital mic pin (0x12), and the current driver sometimes misses the internal mic pin due to the mismatching ADC. This patch adds a bit more clever way to find the matching ADC instead of the static list. Now the driver checks all active input pins and fills only the ADC/MUX's that contain all of them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The mask and value parameters passed to snd_hda_codec_amp_stereo() should be 8-bit values for mute and volume. Passing AMP_IN_MUTE() is wrong, which is found in many places in patch_realtek.c as a left-over from the conversion to snd_hda_codec_amp_stereo(). Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Skip initialization of connections of DAC widgets that aren't used, which resulted in invalid verb parameters. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
alc_free_kctls() has to be called after all jobs done in alc_build_controls(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 3月, 2010 1 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://bugs.launchpad.net/bugs/538895 The OR has verified that both position_fix=1 and model=6stack-dig are necessary to have capture function properly. (The existing 3stack-6ch model quirk seems to be incorrect.) Reported-by: NReuben Bailey <reuben.e.bailey@gmail.com> Tested-by: NReuben Bailey <reuben.e.bailey@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 3月, 2010 2 次提交
-
-
由 Anisse Astier 提交于
This should make the speakers and jack detection work on MSI all-in-one computers NetOn AP1900 and Wind Top AE2220. Signed-off-by: NAnisse Astier <anisse@astier.eu> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix adc_nids[] for ALC260 basic model to match with num_adc_nids. Otherwise you get an invalid NID in the secondary "Input Source" mixer element. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
- 08 3月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Since alc_auto_create_input_ctls() doesn't set the elements for the secondary ADCs, "Input Source" elemtns for these also get empty, resulting in buggy outputs of alsactl like: control.14 { comment.access 'read write' comment.type ENUMERATED comment.count 1 iface MIXER name 'Input Source' index 1 value 0 } This patch fixes alc_mux_enum_*() (and others) to fall back to the first entry if the secondary input mux is empty. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Takashi Iwai 提交于
Fix a wrong value passed to snd_hda_check_board_codec_sid_config() as the upper-limit in parse_alc268(), so that any wrong value can't be passed. So far, no bogus value was set in the quirk entries, so this won't give any behavioral changes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 3月, 2010 1 次提交
-
-
由 Frederik Deweerdt 提交于
Commit eaa9b3a7 introduced the following uninitialized warning: sound/pci/hda/patch_realtek.c: In function 'set_capture_mixer': sound/pci/hda/patch_realtek.c:4928: warning: 'pin' is used uninitialized in this function sound/pci/hda/patch_realtek.c:4918: note: 'pin' was declared here It appears indeed that 'pin' needs to be initialized to 0. Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
In 2.6.33 ACL269 unsol event handler was changed to look up the pre-defined pins, but the headphone pins aren't defined properly in each quirk. This patch adds the missing definitions, and fixes the speaker auto-mute regression on some ASUS (and possibly other) laptops. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
- 25 2月, 2010 2 次提交
-
-
由 Kailang Yang 提交于
Specify proper quirk models for FSC and Quanta machines with ALC269 codec. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
- Fixed alc_subsystem_id( ) typo and add new function. - !(ass & 0x100000)) ==> Delete this check. It is unnecessary check. - Add porti - ALC670 support Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 2月, 2010 2 次提交
-
-
由 Reimundo Heluani 提交于
Add support for Macbook Air 2,1 (late 2008) internal speaker and headphones. Create a "mba21" model for snd-hda-intel. Signed-off-by: NReimundo Heluani <rheluani@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The channel mode definitions for macmini3 model are identical with mb5. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 2月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Use the standard unsol_event callback with each setup callback for IntelMac models with Realtek ALC885 codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Luke Yelavich 提交于
BugLink: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/343989 Add a model quirk for the NVIDIA based Macmini hardware, aka Macmini 3,1. The pinout is almost identical to the mb5 quirk, except for no microphone and the line-in mixer controls being on a different index. Everything works in 2ch mode, but as I am not sure what needs to be changed for 6ch mode, or whether the Mac Mini's chip supports 6ch mode, I have simply duplicated the code from the mb5 quirk for the mac mini chmode management. The new model parameter for this quirk is "macmini3". Signed-off-by: NLuke Yelavich <luke.yelavich@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 2月, 2010 3 次提交
-
-
由 Kailang Yang 提交于
- Add support for ALC665 - Add more ASUS model - Modify common patch for ALC272 ALC273 ALC661 ALC662 ALC663 ALC665 Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
- Add new models ALC269VB_AMIC ALC269VB_DMIC - Add alc269vb_laptop_dmic_setup The record source index Dmic is 0x6 for ALC269VB. - Change eeepc words for ALC269 - Modify init_verb tables of patch_alc269 patch_alc662 patch_alc882 - Modify common patch for ALC270 ALC269VB ALC275 Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
The default values are no need to be set in init_verbs. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 1月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
The COEF setup for model=auto seems problematic on some laptops, resulting in the silent speaker output. Better to disable it for now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The output of COEF index/value in the proc file for Realtek codecs is rather useless since the value varies together with the index. Let's get rid of it again. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Łukasz Wojniłowicz 提交于
Now one can choose speaker configuration in e.g. PulseAudio mixer Signed-off-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 1月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
This patch fixes the aut-mute setup on HP T5735 with ALC262 codec. Instead of wrong amp, use pin control toggling for muting the speaker now. Tested-by: NLee Trager <lee.trager@hp.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 1月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Some codecs disable widgets used for output pins and reserve as vendor- spec widgets. Thus we need to check the widget type and pin cap before actually sending SET_EAPD verbs in the auto-configuration mode. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ALC259 has a widget NID 0x21 for the output pin, but it wasn't handled properly in alc268_new_analog_output(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 1月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Sony VAIO VGN-P11G with ALC262 codec has only one input pin, and the recording doesn't work with model=auto because ALC262 parser sets the wrong cap NIDs to choose the route and the default route for the sole input pin wasn't initialized properly. This patch solves these issues. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
The capture-related mixer elements are missing with ALC861/ALC660 codecs when quirks are present, due to missing call of set_capture_mixer(). Reference: Novell bnc#567340 http://bugzilla.novell.com/show_bug.cgi?id=567340Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Alex Murray 提交于
This patch adds support for automatically muting the speakers when headphones are inserted, as well as relabelling the headphone widgets from the non-standard "HP" to the standard "Headphone" for the mb5 model. Signed-off-by: NAlex Murray <murray.alex@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The alc664-mode4 model doesn't seem to fit with Toshiba NB205 correctly. NB205 uses the pin 0x17 connected with the mixer 0x0f for the speaker output, which isn't controlled by mode4 model at all. Rather model=auto works fine as is on the latest driver, so let it back again. Tested-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-