- 20 3月, 2018 3 次提交
-
-
由 Bodong Wang 提交于
Enable RAW QP to be able to configure burst control by modify_qp. By using burst control with rate limiting, user can achieve best performance and accuracy. The burst control information is passed by user through udata. This patch also reports burst control capability for mlx5 related hardwares, burst control is only marked as supported when both packet_pacing_burst_bound and packet_pacing_typical_size are supported. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Yixian Liu 提交于
The data in resp will be copied from kernel to userspace, thus it needs to be initialized to zeros to avoid copying uninited stack memory. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Fixes: e088a685 ("RDMA/hns: Support rq record doorbell for the user space") Signed-off-by: NYixian Liu <liuyixian@huawei.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Honggang Li 提交于
Before commit f1b65df5 ("IB/mlx5: Add support for active_width and active_speed in RoCE"), the mlx5_ib driver set the default active_width and active_speed to IB_WIDTH_4X and IB_SPEED_QDR. When the RoCE port is down, the RoCE port does not negotiate the active width with the remote side, causing the active width to be zero. When running userspace ibstat to view the port status, ibstat will panic as it reads an invalid width from sys file. This patch restores the original behavior. Fixes: f1b65df5 ("IB/mlx5: Add support for active_width and active_speed in RoCE"). Signed-off-by: NHonggang Li <honli@redhat.com> Reviewed-by: NHal Rosenstock <hal@mellanox.com> Reviewed-by: NNoa Osherovich <noaos@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 16 3月, 2018 11 次提交
-
-
由 Guy Levi 提交于
As a default, for Ethernet packets, the device scatters only the payload of ingress packets. The scatter FCS feature lets the user to get the FCS (Ethernet's frame check sequence) in the received WR's buffer as a 4 Bytes trailer following the packet's payload. Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NGuy Levi <guyle@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Yishai Hadas 提交于
Report to the user area the TSO device capabilities, it includes the max_tso size and the QP types that support it. The TSO is applicable only when when of the ports is ETH and the device supports it. uresp logic around rss_caps is updated to fix a till-now harmless bug computing the length of the structure to copy. The code did not handle the implicit padding before rss_caps correctly. This is necessay to copy tss_caps successfully. Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Henry Orosco 提交于
There is no explicit tear-down sequence initiated on connections if the Control QP OP, Modify QP to close, fails. Fix this by triggering a driver generated Asynchronous Event (AE) on Modify QP failures and tear-down the connection on receipt of the AE. This fix can be generalized to other Modify QP failures (i.e. RTS->TERM, IDLE->RTS, etc) as any modify failure will require a connection tear-down. Fixes: d3749841 ("i40iw: add files for iwarp interface") Signed-off-by: NHenry Orosco <henry.orosco@intel.com> Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Henry Orosco 提交于
The flush CQP OP can be used to optionally generate Asynchronous Events (AEs) in addition to QP flush. Consolidate all HW AE generation code under a new function i40iw_gen_ae which use the flush CQP OP to only generate AEs. Signed-off-by: NHenry Orosco <henry.orosco@intel.com> Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
Open coding a loose value is not acceptable for describing the uABI in RDMA. Provide the missing struct. Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
Open coding a loose value is not acceptable for describing the uABI in RDMA. Provide the missing struct. Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
All of these defines are part of the uABI for the driver, this header duplicates providers/i40iw/i40iw-abi.h in rdma-core. Acked-by: NShiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps) and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to userspace and form part of the uAPI. Move them to the uapi header where they belong. Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Sinan Kaya 提交于
Code includes wmb() followed by writel() in multiple places. writel() already has a barrier on some architectures like arm64. This ends up CPU observing two barriers back to back before executing the register write. Since code already has an explicit barrier call, changing writel() to writel_relaxed(). Signed-off-by: NSinan Kaya <okaya@codeaurora.org> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Yixian Liu 提交于
This patch changes the type of cqn from u32 to u64 to keep userspace and kernel consistent, initializes resp both for cq and qp to zeros, and also changes the condition judgment of outlen considering future caps extension. Suggested-by: NJason Gunthorpe <jgg@mellanox.com> Fixes: e088a685 (hns: Support rq record doorbell for the user space) Fixes: 9b44703d (hns: Support cq record doorbell for the user space) Signed-off-by: NYixian Liu <liuyixian@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NShaobo Xu <xushaobo2@huawei.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Parav Pandit 提交于
add_gid() and del_gid() are optional callback routines. ib_core ignores invoking them while updating GID table entries if they are not implemented by provider drivers. Therefore remove them. Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 15 3月, 2018 14 次提交
-
-
由 Leon Romanovsky 提交于
The failure to destroy the MRs is printed on mlx5_core layer as error and it makes warning prints useless. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
"live" is needed for ODP only and is better to be guarded by appropriate CONFIG. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
According to the IBTA spec 1.3, the driver failure in MR reregister shall release old and new MRs. C11-20: If the CI returns any other error, the CI shall invalidate both "old" and "new" registrations, and release any associated resources. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Return -EOPNOTSUPP value to the user for unsupported reg_user_mr. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The mlx5_ib_alloc_implicit_mr() can fail to acquire pages and the returned mr pointer won't be valid. Ensure that it is not error prior to access. Cc: <stable@vger.kernel.org> # 4.10 Fixes: 81713d37 ("IB/mlx5: Add implicit MR support") Reported-by: NNoa Osherovich <noaos@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Arnd Bergmann 提交于
On 32-bit targets, we otherwise get a warning about an impossible constant integer expression: In file included from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device': include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow] #define BIT(nr) (1UL << (nr)) ^~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT' #define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39) ^~~ drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH' #define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE' ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE; ^~~~~~~~~~~~~~~~~~~ Fixes: 872f3578 ("RDMA/bnxt_re: Add support for MRs with Huge pages") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Arnd Bergmann 提交于
Building for a 32-bit target results in a couple of warnings from casting between a 32-bit pointer and a 64-bit integer: drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq': drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle, ^ drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] (struct bnxt_qplib_srq *)q_handle, ^ In file included from include/linux/byteorder/little_endian.h:5, from arch/arm/include/uapi/asm/byteorder.h:22, from include/asm-generic/bitops/le.h:6, from arch/arm/include/asm/bitops.h:342, from include/linux/bitops.h:38, from include/linux/kernel.h:11, from include/linux/interrupt.h:6, from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39: drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq': include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) ^ include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64' #define cpu_to_le64 __cpu_to_le64 ^~~~~~~~~~~~~ drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64' req.srq_handle = cpu_to_le64(srq); Using a uintptr_t as an intermediate works on all architectures. Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mark Bloch 提交于
On load we create private CQ/QP/PD in order to be used by UMR, we create those resources after we register ourself as an IB device, and we destroy them after we unregister as an IB device. This was changed by commit 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages") which moved the destruction before we unregistration. This allowed to trigger an invalid memory access when unloading mlx5_ib while there are open resources: BUG: unable to handle kernel paging request at 00000001002c012c ... Call Trace: mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib] __slab_free+0x9a/0x2d0 delay_time_func+0x10/0x10 [mlx5_ib] unreg_umr.isra.15+0x4b/0x50 [mlx5_ib] mlx5_mr_cache_free+0x46/0x150 [mlx5_ib] clean_mr+0xc9/0x190 [mlx5_ib] dereg_mr+0xba/0xf0 [mlx5_ib] ib_dereg_mr+0x13/0x20 [ib_core] remove_commit_idr_uobject+0x16/0x70 [ib_uverbs] uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs] ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs] ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs] ib_unregister_device+0xd4/0x190 [ib_core] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] mlx5_remove_device+0xf5/0x120 [mlx5_core] mlx5_unregister_interface+0x37/0x90 [mlx5_core] mlx5_ib_cleanup+0xc/0x225 [mlx5_ib] SyS_delete_module+0x153/0x230 do_syscall_64+0x62/0x110 entry_SYSCALL_64_after_hwframe+0x21/0x86 ... We restore the original behavior by breaking the UMR stage into two parts, pre and post IB registration stages, this way we can restore the original functionality and maintain clean separation of logic between stages. Fixes: 16c1975f ("IB/mlx5: Create profile infrastructure to add and remove stages") Signed-off-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Arnd Bergmann 提交于
We get a build failure on ARM unless the header is included explicitly: drivers/infiniband/hw/i40iw/i40iw_verbs.c: In function 'i40iw_get_vector_affinity': drivers/infiniband/hw/i40iw/i40iw_verbs.c:2747:9: error: implicit declaration of function 'irq_get_affinity_mask'; did you mean 'irq_create_affinity_masks'? [-Werror=implicit-function-declaration] return irq_get_affinity_mask(msix_vec->irq); ^~~~~~~~~~~~~~~~~~~~~ irq_create_affinity_masks drivers/infiniband/hw/i40iw/i40iw_verbs.c:2747:9: error: returning 'int' from a function with return type 'const struct cpumask *' makes pointer from integer without a cast [-Werror=int-conversion] return irq_get_affinity_mask(msix_vec->irq); Fixes: 7e952b19 ("i40iw: Implement get_vector_affinity API") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ilya Lesokhin 提交于
The mlx5 driver needs to be able to issue invalidation to ODP MRs even if it cannot allocate memory. To this end it preallocates emergency pages to use when the situation arises. This flow should be extremely rare enough, that we don't need to worry about contention and therefore a single emergency page is good enough. Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Daniel Jurgens 提交于
Instead synchronizing RCU in a loop when removing mkeys in a batch do it once at the end before freeing them. The result is only waiting for one RCU grace period instead of many serially. Signed-off-by: NDaniel Jurgens <danielj@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> Reported-by: NNoa Osherovich <noaos@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
QP states provided by core layer are converted to enum ib_qp_state and better to use internal variable in that type instead of int. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
mlx5 modify_qp() relies on FW that the error will be thrown if wrong state is supplied. The missing check in FW causes the following crash while using XRC_TGT QPs. [ 14.769632] BUG: unable to handle kernel NULL pointer dereference at (null) [ 14.771085] IP: mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.771894] PGD 800000001472e067 P4D 800000001472e067 PUD 14529067 PMD 0 [ 14.773126] Oops: 0002 [#1] SMP PTI [ 14.773763] CPU: 0 PID: 365 Comm: ubsan Not tainted 4.16.0-rc1-00038-g8151138c0793 #119 [ 14.775192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 14.777522] RIP: 0010:mlx5_ib_modify_qp+0xf60/0x13f0 [ 14.778417] RSP: 0018:ffffbf48001c7bd8 EFLAGS: 00010246 [ 14.779346] RAX: 0000000000000000 RBX: ffff9a8f9447d400 RCX: 0000000000000000 [ 14.780643] RDX: 0000000000000000 RSI: 000000000000000a RDI: 0000000000000000 [ 14.781930] RBP: 0000000000000000 R08: 00000000000217b0 R09: ffffffffbc9c1504 [ 14.783214] R10: fffff4a180519480 R11: ffff9a8f94523600 R12: ffff9a8f9493e240 [ 14.784507] R13: ffff9a8f9447d738 R14: 000000000000050a R15: 0000000000000000 [ 14.785800] FS: 00007f545b466700(0000) GS:ffff9a8f9fc00000(0000) knlGS:0000000000000000 [ 14.787073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.787792] CR2: 0000000000000000 CR3: 00000000144be000 CR4: 00000000000006b0 [ 14.788689] Call Trace: [ 14.789007] _ib_modify_qp+0x71/0x120 [ 14.789475] modify_qp.isra.20+0x207/0x2f0 [ 14.790010] ib_uverbs_modify_qp+0x90/0xe0 [ 14.790532] ib_uverbs_write+0x1d2/0x3c0 [ 14.791049] ? __handle_mm_fault+0x93c/0xe40 [ 14.791644] __vfs_write+0x36/0x180 [ 14.792096] ? handle_mm_fault+0xc1/0x210 [ 14.792601] vfs_write+0xad/0x1e0 [ 14.793018] SyS_write+0x52/0xc0 [ 14.793422] do_syscall_64+0x75/0x180 [ 14.793888] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 14.794527] RIP: 0033:0x7f545ad76099 [ 14.794975] RSP: 002b:00007ffd78787468 EFLAGS: 00000287 ORIG_RAX: 0000000000000001 [ 14.795958] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f545ad76099 [ 14.797075] RDX: 0000000000000078 RSI: 0000000020009000 RDI: 0000000000000003 [ 14.798140] RBP: 00007ffd78787470 R08: 00007ffd78787480 R09: 00007ffd78787480 [ 14.799207] R10: 00007ffd78787480 R11: 0000000000000287 R12: 00005599ada98760 [ 14.800277] R13: 00007ffd78787560 R14: 0000000000000000 R15: 0000000000000000 [ 14.801341] Code: 4c 8b 1c 24 48 8b 83 70 02 00 00 48 c7 83 cc 02 00 00 00 00 00 00 48 c7 83 24 03 00 00 00 00 00 00 c7 83 2c 03 00 00 00 00 00 00 <c7> 00 00 00 00 00 48 8b 83 70 02 00 00 c7 40 04 00 00 00 00 4c [ 14.804012] RIP: mlx5_ib_modify_qp+0xf60/0x13f0 RSP: ffffbf48001c7bd8 [ 14.804838] CR2: 0000000000000000 [ 14.805288] ---[ end trace 3f1da0df5c8b7c37 ]--- Cc: syzkaller <syzkaller@googlegroups.com> Reported-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 14 3月, 2018 9 次提交
-
-
由 Zhu Yanjun 提交于
In hfi.h, the header file opa_addr.h is included twice. In vt.h, the header file mmap.h is included twice. Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com> Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yixian Liu 提交于
This patch updates to support cq record doorbell for the kernel space. Signed-off-by: NYixian Liu <liuyixian@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NShaobo Xu <xushaobo2@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yixian Liu 提交于
This patch updates to support rq record doorbell for the kernel space. Signed-off-by: NYixian Liu <liuyixian@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NShaobo Xu <xushaobo2@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yixian Liu 提交于
This patch updates to support cq record doorbell for the user space. Signed-off-by: NYixian Liu <liuyixian@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NShaobo Xu <xushaobo2@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yixian Liu 提交于
This patch adds interfaces and definitions to support the rq record doorbell for the user space. Signed-off-by: NYixian Liu <liuyixian@huawei.com> Signed-off-by: NLijun Ou <oulijun@huawei.com> Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: NShaobo Xu <xushaobo2@huawei.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Boris Pismenny 提交于
This patch validates user provided input to prevent integer overflow due to integer manipulation in the mlx5_ib_create_srq function. Cc: syzkaller <syzkaller@googlegroups.com> Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: NBoris Pismenny <borisp@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Boris Pismenny 提交于
Add a check for the length of the qpin structure to prevent out-of-bounds reads BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2 Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549 CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? create_raw_packet_qp+0x114c/0x15e2 memcpy+0x1f/0x50 create_raw_packet_qp+0x114c/0x15e2 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d ? lock_acquire+0x370/0x370 create_qp_common+0x2245/0x3b50 ? destroy_qp_user.isra.47+0x100/0x100 ? kasan_kmalloc+0x13d/0x170 ? sched_clock_cpu+0x18/0x180 ? fs_reclaim_acquire.part.15+0x5/0x30 ? __lock_acquire+0xa11/0x1da0 ? sched_clock_cpu+0x18/0x180 ? kmem_cache_alloc_trace+0x17e/0x310 ? mlx5_ib_create_qp+0x30e/0x17b0 mlx5_ib_create_qp+0x33d/0x17b0 ? sched_clock_cpu+0x18/0x180 ? create_qp_common+0x3b50/0x3b50 ? lock_acquire+0x370/0x370 ? __radix_tree_lookup+0x180/0x220 ? uverbs_try_lock_object+0x68/0xc0 ? rdma_lookup_get_uobject+0x114/0x240 create_qp.isra.5+0xce4/0x1e20 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00 ? ib_uverbs_cq_event_handler+0x160/0x160 ? __might_fault+0x17c/0x1c0 ib_uverbs_create_qp+0x21b/0x2a0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3d3/0xa60 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x4477b9 RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9 RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005 RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0 Allocated by task 549: __kmalloc+0x15e/0x340 kvmalloc_node+0xa1/0xd0 create_user_qp.isra.46+0xd42/0x1610 create_qp_common+0x2e63/0x3b50 mlx5_ib_create_qp+0x33d/0x17b0 create_qp.isra.5+0xce4/0x1e20 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0x55a/0xad0 __vfs_write+0xf7/0x5c0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x18/0x85 Freed by task 368: kfree+0xeb/0x2f0 kernfs_fop_release+0x140/0x180 __fput+0x266/0x700 task_work_run+0x104/0x180 exit_to_usermode_loop+0xf7/0x110 syscall_return_slowpath+0x298/0x370 entry_SYSCALL_64_fastpath+0x83/0x85 The buggy address belongs to the object at ffff880066b99180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 272 bytes inside of 512-byte region [ffff880066b99180, ffff880066b99380) The buggy address belongs to the page: page:000000006040eedd count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019 raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 0fb2ed66 ("IB/mlx5: Add create and destroy functionality for Raw Packet QP") Signed-off-by: NBoris Pismenny <borisp@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
This patch does not change any functionality. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Selvin Xavier <selvin.xavier@broadcom.com> Cc: Devesh Sharma <devesh.sharma@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bart Van Assche 提交于
Avoid that building with W=1 causes the following warning to appear: drivers/infiniband/hw/hfi1/qp.c:484: warning: Cannot understand * on line 484 - I thought it was a doc line Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 10 3月, 2018 2 次提交
-
-
由 Leon Romanovsky 提交于
The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583 ("IB/mlx5: Add support for resize CQ") Reported-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Doug Ledford 提交于
The original commit of this patch has a munged log message that is missing several of the tags the original author intended to be on the patch. This was due to patchworks misinterpreting a cut-n-paste separator line as an end of message line and munging the mbox that was used to import the patch: https://patchwork.kernel.org/patch/10264089/ The original patch will be reapplied with a fixed commit message so the proper tags are applied. This reverts commit aa0de36a. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 09 3月, 2018 1 次提交
-
-
由 Steve Wise 提交于
Zero out the fields of the struct ib_pd for user mode pds so that users querying pds via nldev will not get garbage. For simplicity, use kzalloc() to allocate the mlx4_ib_pd struct. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-