- 26 6月, 2014 5 次提交
-
-
由 Fabian Frederick 提交于
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: "David S. Miller" <davem@davemloft.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: netdev@vger.kernel.org Cc: Joe Perches <joe@perches.com> Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== crc32 combine improvements So almost a month passed, and I don't want this to get lost somewhere. I have applied the feedback given at that time to this set, rebased plus tested it against latest net-next. I decided to route this via netdev as it improves performance upon library code that provides library bits for SCTP, i.e. for non-linear skb csum handling in IPVS. Thus, resending this for George before it gets lost. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 George Spelvin 提交于
In case they help the compiler. Signed-off-by: NGeorge Spelvin <linux@horizon.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 George Spelvin 提交于
So it gets discarded after the selftest. Signed-off-by: NGeorge Spelvin <linux@horizon.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 George Spelvin 提交于
There's no need for a full 32x32 matrix, when rows before the last are just shifted copies of the rows after them. There's still room for improvement (especially on X86 processors with CRC32 and PCLMUL instructions), but this is a large step in the right direction [which is in particular useful for its current user, namely SCTP checksumming over multiple skb frags[] entries, i.e. in IPVS balancing when other CRC32 offloads are not available]. The internal primitive is now called crc32_generic_shift and takes one less argument; the XOR with crc2 is done in inline wrappers. Signed-off-by: NGeorge Spelvin <linux@horizon.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 6月, 2014 1 次提交
-
-
由 Anish Bhatt 提交于
Hi, This patch fixes warnings generated by sparse as pointed out by kbuild test robot, please apply to net-next. Applies on top of commit 79631c89 ("trivial: net/irda/irlmp.c: Fix closing brace followed by if") -Anish v2: cleanup submission as per davem's feedback Fixes: 76bcb31e ("cxgb4 : Add DCBx support codebase and dcbnl_ops") Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2014 11 次提交
-
-
由 Rasmus Villemoes 提交于
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Govindarajulu Varadarajan says: ==================== enic updates This series fixes minor bugs and adds new features like Accelerated RFS, busy_poll, tx clean-up in napi_poll. v3: * While doing tx cleanup in napi, ignore budget and clean up all desc possible. v2: * Fix #ifdef coding style issue in '[PATCH 4/8] enic: alloc/free rx_cpu_rmap' And [PATCH 5/8] enic: Add Accelerated RFS support' ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Till now enic had been doing tx clean in isr. Using napi infrastructure to move the tx clean up out of isr to softirq. Now, wq isr schedules napi poll. In enic_poll_msix_wq we clean up the tx queus. This is applicable only on MSIX. In INTx and MSI we use single napi to clean both rx & tx queues. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds support for low latency busy_poll. * Introduce drivers ndo_busy_poll function enic_busy_poll, which is called by socket waiting for data. * Introduce locking between napi_poll nad busy_poll * enic_busy_poll cleans up all the rx pkts possible. While in busy_poll, rq holds the state ENIC_POLL_STATE_POLL. While in napi_poll, rq holds the state ENIC_POLL_STATE_NAPI. * in napi_poll we return if we are in busy_poll. Incase of INTx & msix, we just service wq and return if busy_poll is going on. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Camuso 提交于
We were experiencing occasional "BUG: scheduling while atomic" splats in our testing. Enabling DEBUG_SPINLOCK and DEBUG_LOCKDEP in the kernel exposed a lockdep in the enic driver. enic 0000:0b:00.0 eth2: Link UP ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 3.12.0-rc1.x86_64-dbg+ #2 Tainted: GF W ------------------------------------------------------ NetworkManager/4209 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire: (&(&enic->devcmd_lock)->rlock){+.+...}, at: [<ffffffffa026b7e4>] enic_dev_packet_filter+0x44/0x90 [enic] The fix was to replace spin_lock with spin_lock_bh for the enic devcmd_lock, so that soft irqs would be disabled while the lock is held. Signed-off-by: NSujith Sankar <ssujith@cisco.com> Signed-off-by: NTony Camuso <tcamuso@redhat.com> Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds supports for Accelerated Receive Flow Steering. When the desired rx is different from current rq, for a flow, kernel calls the driver function enic_rx_flow_steer(). enic_rx_flow_steer adds a IP-TCP/UDP hardware filter. Driver registers a timer function enic_flow_may_expire. This function is called every HZ/4 seconds. In this function we check if the added filter has expired by calling rps_may_expire_flow(). If the flow has expired, it removes the hw filter. As of now adaptor supports only IPv4 - TCP/UDP filters. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
rx_cpu_rmap provides the reverse irq cpu affinity. This patch allocates and sets drivers netdev->rx_cpu_rmap accordingly. rx_cpu_rmap is set in enic_request_intr() which is called by enic_open and rx_cpu_rmap is freed in enic_free_intr() which is called by enic_stop. This is used by Accelerated RFS. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds interface to add and delete IP 5 tuple filter. This interface is used by Accelerated RFS code to steer a flow to corresponding receive queue. As of now adaptor supports only ipv4 + tcp/udp packet steering. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Hardware (in readq(&devcmd->args[0])) returns positive number in case of error. But _vnic_dev_cmd should return a negative value in case of error. Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
skb_flow_dissect() dissects only transport header type in ip_proto. It dose not give any information about IPv4 or IPv6. This patch adds new member, n_proto, to struct flow_keys. Which records the IP layer type. i.e IPv4 or IPv6. This can be used in netdev->ndo_rx_flow_steer driver function to dissect flow. Adding new member to flow_keys increases the struct size by around 4 bytes. This causes BUILD_BUG_ON(sizeof(qcb->data) < sz); to fail in qdisc_cb_private_validate() So increase data size by 4 Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 6月, 2014 11 次提交
-
-
由 David S. Miller 提交于
Varka Bhadram says: ==================== Driver for TI CC2520 Radio changes since v6: - proper releasing of resources - changed pr_debug() to dev_dbg() - removed unwanted header file - changed is_tx type to bool changes since v5: - added saddr and panc_changed functionality - rework on lqi field - improvements in checkings for reception - modification in debug messages changes since v4: - feature to write into cc2520 RAM - added h/w address filtering changes since v3: - drop the unused varible changes since v2: - drop spi mode dt binding changes since v1: - improvement in gpio setup - changed len pointer to len variable changes for v1: - improvements in the locking mechanism in Tx and SFD ISR - proper checkings for GPIO pins - avoids the memory leak for priv - used devm_* API's - moved the code from header file to .c file - removed cc2520_unregister() ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varka Bhadram 提交于
DT bindings for cc2520 radio driver Signed-off-by: NVarka Bhadram <varkab@cdac.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varka Bhadram 提交于
Signed-off-by: NVarka Bhadram <varkab@cdac.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varka Bhadram 提交于
This patch adds the driver support for the cc2520 radio. Driver support: - Tx and Rx of IEEE-802.15.4 packets - Energy Detection on channel - Setting the Channel for the radio. [b/w 11 - 26 channels] - Start and Stop the radio - h/w address filtering Signed-off-by: NVarka Bhadram <varkab@cdac.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Anish Bhatt says: ==================== cxgb4 : Add DCBx support to Chelsio cxgb4 driver This patchset adds support for DCBx via dcbnl_ops to the cxgb4 driver. This should enable cxgb4 to work with open-lldp and the like. The last patch only updates copyright year. v2 : move inclusion of struct port_dcb_info to the same patch as where it is defined. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anish Bhatt 提交于
Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anish Bhatt 提交于
Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anish Bhatt 提交于
cxgb4 : Integrate DCBx support into cxgb4 module. Register dbcnl_ops to give access to DCBx functions Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anish Bhatt 提交于
Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anish Bhatt 提交于
cxgb4 : Update fw interface file for DCBx support. Adds all the required fields to fw interface to communicate DCBx info Signed-off-by: NAnish Bhatt <anish@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manuel Schölling 提交于
The time comparsion functions require arguments of type unsigned long instead of (signed) long. Signed-off-by: NManuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2014 3 次提交
-
-
由 Duan Jiong 提交于
tcf_ematch is allocated by kzalloc in function tcf_em_tree_validate(), so cm_old is always NULL. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
use list_for_each_entry_continue_reverse to rollback in fdb_add_hw when add address failed Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-06-20 This series contains updates to i40e and i40evf. Anjali provides an update to the registers to handle the updates from the hardware. Also provides a fix so that we do not try to access the rings through the qvectors at the time of freeing the qvectors. Jesse provides a workaround for some older NVM versions where the NVM was not filling in the GLQF_HKEY register, so made sure that the critical register is initialized. Michal provides a fix to reset the head and tail on admin queue initialization where head and tail are not reset by the hardware. Neerav adds a helper routine that would wait for the Rx/Tx queue to reach the enable or disable state that is requested. Also provides a fix to the debugfs command "lldp get remote" which was dumping the local LLDPDU instead of the peer's LLDPDU. Fixed a bug when all the Tx hang recovery mechanisms have failed and the driver tries to bring down the interface in the interrupt context. Shannon provides a patch to clear the Virtual Ethernet Bridge (VEB) stats when the PF stats are cleared. Also cleans the service tasks so that they do not run while a reset is in progress. Mitch fixes an issue in i40evf_get_rxfh() where only fifteen registers were being read instead of all sixteen. Carolyn provides a change to the RSS configuration to set table size and write to the hardware to confirm the RSS table size being used. Kamil makes a change to the admin queue debug prints so that they will not cause segmentation faults in some of our tool applications. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2014 9 次提交
-
-
由 Catherine Sullivan 提交于
Bump versions. Change-ID: Ifaed5404b9e953a11f4c88953ffe4bc8937705f1 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
Some AQ debug prints needs be moved around or do additional checks so they will not cause our tool applications to cause segmentation faults. The tools run in user space and we need to correctly reference kernel space memory. Change-ID: Ia2ac4076f576b805f350453fd50ad69c2a91ab9a Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch changes the RSS configuration to set table size and write to hardware to confirm RSS table size being used. Change-ID: I455a4c09c9dd479f5791ee1f09fdc83ff9908df5 Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Fabian Frederick 提交于
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: Ariel Elior <ariele@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: Samuel Ortiz <samuel@sortiz.org> Cc: netdev@vger.kernel.org Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The RNDIS_STATUS_NETWORK_CHANGE event is received after the Hyper-V host sleep or hibernation. We refresh network at this time. MS-TFS: 135162 Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitch Williams 提交于
The loop in i40evf_get_rxfh_indir was only reading fifteen registers, not all sixteen. Change the matching loop in i40evf_set_rxfh_indir at the same time to make the code more consistent. Change-ID: I6c182287698e742d1f6ca1a4bcc43cc08df6e1de Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Make sure the service tasks don't try to meddle with the device while a reset is in progress. Odd things can happen such as funky stats values. Change-ID: I6929cb9d6d96839c9279362ca7c0e3fe6c8fcc66 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The VEB really is part of the whole PF and should be cleared at the same time. Change-ID: Ia1d4d1df5cf421f2578a22486650dd256cc4617a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-