This patch moves a large number of memory release paths inside of the
configfs callback target_core_hba_item_ops->release() called from
within fs/configfs/item.c: config_item_cleanup() context.  This patch
resolves the SLUB 'Poison overwritten' warnings.
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch removes the legacy procfs based target_core_mib.c code,
and moves the necessary scsi_index_tables functions and defines into
target_core_transport.c and target_core_base.h code to allow existing
fabric independent statistics to function.

This includes the removal of a handful of 'atomic_t mib_ref_count'
counters used in struct se_node_acl, se_session and se_hba to prevent
removal while using seq_list procfs walking logic.

[jejb: fix up compile failures]
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch fixes a bug introduced during the v4 control CDB emulation
refactoring that broke SCF_SCSI_CONTROL_SG_IO_CDB operation within
transport_map_control_cmd_to_task().  It moves the BUG_ON() into
transport_do_se_mem_map() after the TRANSPORT(dev)->do_se_mem_map()
RAMDISK_DR special case, and adds the proper struct se_mem assignment
when !list_empty() for normal non RAMDISK_DR backend device cases.
Reported-by: NKai-Thorsten Hambrecht <kai@hambrecht.org>
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch fixes two bugs uncovered during testing with
slub_debug=FPUZ during module_exit() -> target_core_exit_configfs()
with release of configfs subsystem consumer default groups, namely how
this should be working with
fs/configfs/dir.c:configfs_unregister_subsystem() release logic for
struct config_group->default_group.

The first issue involves configfs_unregister_subsystem() expecting to
walk+drain the top-level subsys->su_group.default_groups directly in
unlink_group(), and not directly from the configfs subsystem consumer
for the top level struct config_group->default_groups.  This patch
drops the walk+drain of subsys->su_group.default_groups from TCM
configfs subsystem consumer code, and moves the top-level
->default_groups kfree() after configfs_unregister_subsystem() has
been called.

The second issue involves calling
core_alua_free_lu_gp(se_global->default_lu_gp) to release the
default_lu_gp->lu_gp_group before configfs_unregister_subsystem() has
been called.  This patches also moves the core_alua_free_lu_gp() call
to release default_lu_group->lu_gp_group after the subsys has been
unregistered.

Finally, this patch explictly clears the
[lu_gp,alua,hba]_cg->default_groups pointers after kfree() to ensure
that no stale memory is picked up from child struct
config_group->default_group[] while configfs_unregister_subsystem() is
called.
Reported-by: NFubo Chen <fubo.chen@gmail.com>
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The struct se_node_acl->device_list_lock needs to be released if either
sanity check for struct se_dev_entry->se_lun_acl or deve->se_lun fails.
Signed-off-by: NFubo Chen <fubo.chen@gmail.com>
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch fixes a bug in core_update_device_list_for_node() where
individual demo-mode generated MappedLUN's UA + Persistent
Reservations metadata where being leaked, instead of falling through
and calling existing core_scsi3_ua_release_all() and
core_scsi3_free_pr_reg_from_nacl() at the end of
core_update_device_list_for_node().

This bug would manifest itself with the following OOPs w/ TPG
demo-mode endpoints (tfo->tpg_check_demo_mode()=1), and PROUT
REGISTER+RESERVE -> explict struct se_session logout -> struct
se_device shutdown:

[  697.021139] LIO_iblock used greatest stack depth: 2704 bytes left
[  702.235017] general protection fault: 0000 [#1] SMP
[  702.235074] last sysfs file: /sys/devices/virtual/net/lo/operstate
[  704.372695] CPU 0
[  704.372725] Modules linked in: crc32c target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs sr_mod cdrom sd_mod ata_piix mptspi mptscsih libata mptbase [last unloaded: iscsi_target_mod]
[  704.375442]
[  704.375563] Pid: 4964, comm: tcm_node Not tainted 2.6.37+ #1 440BX Desktop Reference Platform/VMware Virtual Platform
[  704.375912] RIP: 0010:[<ffffffffa00aaa16>]  [<ffffffffa00aaa16>] __core_scsi3_complete_pro_release+0x31/0x133 [target_core_mod]
[  704.376017] RSP: 0018:ffff88001e5ffcb8  EFLAGS: 00010296
[  704.376017] RAX: 6d32335b1b0a0d0a RBX: ffff88001d952cb0 RCX: 0000000000000015
[  704.376017] RDX: ffff88001b428000 RSI: ffff88001da5a4c0 RDI: ffff88001e5ffcd8
[  704.376017] RBP: ffff88001e5ffd28 R08: ffff88001e5ffcd8 R09: ffff88001d952080
[  704.377116] R10: ffff88001dfc5480 R11: ffff88001df8abb0 R12: ffff88001d952cb0
[  704.377319] R13: 0000000000000000 R14: ffff88001df8abb0 R15: ffff88001b428000
[  704.377521] FS:  00007f033d15c6e0(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000
[  704.377861] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  704.378043] CR2: 00007fff09281510 CR3: 000000001e5db000 CR4: 00000000000006f0
[  704.378110] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  704.378110] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  704.378110] Process tcm_node (pid: 4964, threadinfo ffff88001e5fe000, task ffff88001d99c260)
[  704.378110] Stack:
[  704.378110]  ffffea0000678980 ffff88001da5a4c0 ffffea0000678980 ffff88001f402b00
[  704.378110]  ffff88001e5ffd08 ffffffff810ea236 ffff88001e5ffd18 0000000000000282
[  704.379772]  ffff88001d952080 ffff88001d952cb0 ffff88001d952cb0 ffff88001dc79010
[  704.380082] Call Trace:
[  704.380220]  [<ffffffff810ea236>] ? __slab_free+0x89/0x11c
[  704.380403]  [<ffffffffa00ab781>] core_scsi3_free_all_registrations+0x3e/0x157 [target_core_mod]
[  704.380479]  [<ffffffffa00a752b>] se_release_device_for_hba+0xa6/0xd8 [target_core_mod]
[  704.380479]  [<ffffffffa00a7598>] se_free_virtual_device+0x3b/0x45 [target_core_mod]
[  704.383750]  [<ffffffffa00a3177>] target_core_drop_subdev+0x13a/0x18d [target_core_mod]
[  704.384068]  [<ffffffffa00960db>] client_drop_item+0x25/0x31 [configfs]
[  704.384263]  [<ffffffffa00967b5>] configfs_rmdir+0x1a1/0x223 [configfs]
[  704.384459]  [<ffffffff810fa8cd>] vfs_rmdir+0x7e/0xd3
[  704.384631]  [<ffffffff810fc3be>] do_rmdir+0xa3/0xf4
[  704.384895]  [<ffffffff810eed15>] ? filp_close+0x67/0x72
[  704.386485]  [<ffffffff810fc446>] sys_rmdir+0x11/0x13
[  704.387893]  [<ffffffff81002a92>] system_call_fastpath+0x16/0x1b
[  704.388083] Code: 4c 8d 45 b0 41 56 49 89 d7 41 55 41 89 cd 41 54 b9 15 00 00 00 53 48 89 fb 48 83 ec 48 4c 89 c7 48 89 75 98 48 8b 86 28 01 00 00 <48> 8b 80 90 01 00 00 48 89 45 a0 31 c0 f3 aa c7 45 ac 00 00 00
[  704.388763] RIP  [<ffffffffa00aaa16>] __core_scsi3_complete_pro_release+0x31/0x133 [target_core_mod]
[  704.389142]  RSP <ffff88001e5ffcb8>
[  704.389572] ---[ end trace 2a3614f3cd6261a5 ]---
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch adds an explict check for struct iblock_dev->ibd_bd in
iblock_free_device() before calling blkdev_put(), which will otherwise hit
the following NULL pointer dereference @ ib_dev->ibd_bd when iblock_create_virtdevice()
fails to claim an already in-use struct block_device via blkdev_get_by_path().

[  112.528578] Target_Core_ConfigFS: Allocated struct se_subsystem_dev: ffff88001e750000 se_dev_su_ptr: ffff88001dd05d70
[  112.534681] Target_Core_ConfigFS: Calling t->free_device() for se_dev_su_ptr: ffff88001dd05d70
[  112.535029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[  112.535029] IP: [<ffffffff814987a3>] mutex_lock+0x14/0x35
[  112.535029] PGD 1e5d0067 PUD 1e274067 PMD 0
[  112.535029] Oops: 0002 [#1] SMP
[  112.535029] last sysfs file: /sys/devices/pci0000:00/0000:00:07.1/host2/target2:0:0/2:0:0:0/type
[  112.535029] CPU 0
[  112.535029] Modules linked in: iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs sr_mod cdrom sd_mod ata_piix mptspi mptscsih libata mptbase [last unloaded: scsi_wait_scan]
[  112.535029]
[  112.535029] Pid: 3345, comm: python2.5 Not tainted 2.6.37+ #1 440BX Desktop Reference Platform/VMware Virtual Platform
[  112.535029] RIP: 0010:[<ffffffff814987a3>]  [<ffffffff814987a3>] mutex_lock+0x14/0x35
[  112.535029] RSP: 0018:ffff88001e6d7d58  EFLAGS: 00010246
[  112.535029] RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000082
[  112.535029] RDX: ffff88001e6d7fd8 RSI: 0000000000000083 RDI: 0000000000000020
[  112.535029] RBP: ffff88001e6d7d68 R08: 0000000000000000 R09: 0000000000000000
[  112.535029] R10: ffff8800000be860 R11: ffff88001f420000 R12: 0000000000000020
[  112.535029] R13: 0000000000000083 R14: ffff88001d809430 R15: ffff88001d8094f8
[  112.535029] FS:  00007ff17ca7d6e0(0000) GS:ffff88001fa00000(0000) knlGS:0000000000000000
[  112.535029] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  112.535029] CR2: 0000000000000020 CR3: 000000001e5d2000 CR4: 00000000000006f0
[  112.535029] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  112.535029] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  112.535029] Process python2.5 (pid: 3345, threadinfo ffff88001e6d6000, task ffff88001e2d0760)
[  112.535029] Stack:
[  112.535029]  ffff88001e6d7d88 0000000000000000 ffff88001e6d7d98 ffffffff811187fc
[  112.535029]  ffff88001d809430 ffff88001dd05d70 ffff88001e750860 ffff88001e750000
[  112.535029]  ffff88001e6d7db8 ffffffffa00e3757 ffff88001e6d7db8 0000000000000004
[  112.535029] Call Trace:
[  112.535029]  [<ffffffff811187fc>] blkdev_put+0x28/0x107
[  112.535029]  [<ffffffffa00e3757>] iblock_free_device+0x1d/0x36 [target_core_iblock]
[  112.535029]  [<ffffffffa00a319c>] target_core_drop_subdev+0x15f/0x18d [target_core_mod]
[  112.535029]  [<ffffffffa00960db>] client_drop_item+0x25/0x31 [configfs]
[  112.535029]  [<ffffffffa00967b5>] configfs_rmdir+0x1a1/0x223 [configfs]
[  112.535029]  [<ffffffff810fa8cd>] vfs_rmdir+0x7e/0xd3
[  112.535029]  [<ffffffff810fc3be>] do_rmdir+0xa3/0xf4
[  112.535029]  [<ffffffff810fc446>] sys_rmdir+0x11/0x13
[  112.535029]  [<ffffffff81002a92>] system_call_fastpath+0x16/0x1b
[  112.535029] Code: 8b 04 25 88 b5 00 00 48 2d d8 1f 00 00 48 89 43 18 31 c0 5e 5b c9 c3 55 48 89 e5 53 48 89 fb 48 83 ec 08 e8 c4 f7 ff ff 48 89 df <3e> ff 0f 79 05 e8 1e ff ff ff 65 48 8b 04 25 88 b5 00 00 48 2d
[  112.535029] RIP  [<ffffffff814987a3>] mutex_lock+0x14/0x35
[  112.535029]  RSP <ffff88001e6d7d58>
[  112.535029] CR2: 0000000000000020
[  132.679636] ---[ end trace 05754bb48eb828f0 ]---

Note it also adds an second explict check for ib_dev->ibd_bio_set before calling
bioset_free() to fix the same possible NULL pointer deference during an early
iblock_create_virtdevice() failure.
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

blkdev_get_by_path() returns an ERR_PTR() or error and it doesn't return
a NULL.  It looks like this bug would be easy to trigger by mistake.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

If I create a scsi_debug device that is larger than 4GB, the multiplication of
(block * scsi_debug_sector_size) can produce a 64-bit value.  Unfortunately,
the compiler sees two 32-bit quantities and performs a 32-bit multiplication,
thus truncating the bits above 2^32.  This causes the wrong memory location to
be read or written.  Change block and rest to be unsigned long long.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Acked-by: NDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Make the driver safer by using irqsave/irqrestore with host_lock.
Signed-off-by: NMadhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

There is a small race window in qla2x00_do_dpc() between
checking for kthread_should_stop() and going to sleep after
setting TASK_INTERRUPTIBLE. If qla2x00_free_device() is called
in this window, kthread_stop will wait forever because there
will be no one to wake up the process.

Fix by making sure we only set TASK_INTERRUPTIBLE before checking
kthread_stop().
Reported-by: NBandan Das <bandan.das@stratus.com>
Acked-by: NMadhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix DIMMs per DCTs output

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use single thread workqueues

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: don't always drop malformed replies on the floor (try #3)
  cifs: clean up checks in cifs_echo_request
  [CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (emc1403) Fix I2C address range
  hwmon: (lm63) Consider LM64 temperature offset

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  pci: use security_capable() when checking capablities during config space read
  security: add cred argument to security_capable()
  tpm_tis: Use timeouts returned from TPM

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h
  ARM: S5PV310: Cleanup System MMU
  ARM: S5PV310: Add support System MMU on SMDKV310

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix msr instruction detection
  microblaze: Fix pte_update function
  microblaze: Fix asm compilation warning
  microblaze: Fix IRQ flag handling for MSR=0

This code makes two calls to clk_get, then test both return values and
fails if either failed.

The problem is that in the first inner if, where the first call to
clk_get has failed, it don't know if the second call has failed as well.
So it don't know whether clk_get should be called on the result of the
second call.  Of course, it would be possible to test that value again.
A simpler solution is just to test the result of calling clk_get
directly after each call.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
position p1,p2;
expression e;
statement S;
@@

e = clk_get@p1(...)
...
if@p2 (IS_ERR(e)) S

@@
expression e;
statement S;
identifier l;
position r.p1, p2 != r.p2;
@@

*e = clk_get@p1(...)
... when != clk_put(e)
*if@p2 (...)
{
  ... when != clk_put(e)
* return ...;
}// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: NTony Lindgren <tony@atomide.com>
Acked-by: NAmit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_uncharge_page() should be called in all failure cases after
mem_cgroup_charge_newpage() is called in huge_memory.c::collapse_huge_page()

 [ 4209.076861] BUG: Bad page state in process khugepaged  pfn:1e9800
 [ 4209.077601] page:ffffea0006b14000 count:0 mapcount:0 mapping:          (null) index:0x2800
 [ 4209.078674] page flags: 0x40000000004000(head)
 [ 4209.079294] pc:ffff880214a30000 pc->flags:2146246697418756 pc->mem_cgroup:ffffc9000177a000
 [ 4209.082177] (/A)
 [ 4209.082500] Pid: 31, comm: khugepaged Not tainted 2.6.38-rc3-mm1 #1
 [ 4209.083412] Call Trace:
 [ 4209.083678]  [<ffffffff810f4454>] ? bad_page+0xe4/0x140
 [ 4209.084240]  [<ffffffff810f53e6>] ? free_pages_prepare+0xd6/0x120
 [ 4209.084837]  [<ffffffff8155621d>] ? rwsem_down_failed_common+0xbd/0x150
 [ 4209.085509]  [<ffffffff810f5462>] ? __free_pages_ok+0x32/0xe0
 [ 4209.086110]  [<ffffffff810f552b>] ? free_compound_page+0x1b/0x20
 [ 4209.086699]  [<ffffffff810fad6c>] ? __put_compound_page+0x1c/0x30
 [ 4209.087333]  [<ffffffff810fae1d>] ? put_compound_page+0x4d/0x200
 [ 4209.087935]  [<ffffffff810fb015>] ? put_page+0x45/0x50
 [ 4209.097361]  [<ffffffff8113f779>] ? khugepaged+0x9e9/0x1430
 [ 4209.098364]  [<ffffffff8107c870>] ? autoremove_wake_function+0x0/0x40
 [ 4209.099121]  [<ffffffff8113ed90>] ? khugepaged+0x0/0x1430
 [ 4209.099780]  [<ffffffff8107c236>] ? kthread+0x96/0xa0
 [ 4209.100452]  [<ffffffff8100dda4>] ? kernel_thread_helper+0x4/0x10
 [ 4209.101214]  [<ffffffff8107c1a0>] ? kthread+0x0/0xa0
 [ 4209.101842]  [<ffffffff8100dda0>] ? kernel_thread_helper+0x0/0x10
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3e7d3449 ("mm: vmscan: reclaim order-0 and use compaction
instead of lumpy reclaim") introduced an indefinite loop in
shrink_zone().

It meant to break out of this loop when no pages had been reclaimed and
not a single page was even scanned.  The way it would detect the latter
is by taking a snapshot of sc->nr_scanned at the beginning of the
function and comparing it against the new sc->nr_scanned after the scan
loop.  But it would re-iterate without updating that snapshot, looping
forever if sc->nr_scanned changed at least once since shrink_zone() was
invoked.

This is not the sole condition that would exit that loop, but it
requires other processes to change the zone state, as the reclaimer that
is stuck obviously can not anymore.

This is only happening for higher-order allocations, where reclaim is
run back to back with compaction.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NMichal Hocko <mhocko@suse.cz>
Tested-by: Kent Overstreet<kent.overstreet@gmail.com>
Reported-by: NKent Overstreet <kent.overstreet@gmail.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the page is going to be written to, __do_page needs to break COW.

However, the old page (before breaking COW) was never mapped mapped into
the current pte (__do_fault is only called when the pte is not present),
so vmscan can't have marked the old page as PageMlocked due to being
mapped in __do_fault's VMA.  Therefore, __do_fault() does not need to
worry about clearing PageMlocked() on the old page.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vmscan can lazily find pages that are mapped within VM_LOCKED vmas, and
set the PageMlocked bit on these pages, transfering them onto the
unevictable list.  When do_wp_page() breaks COW within a VM_LOCKED vma,
it may need to clear PageMlocked on the old page and set it on the new
page instead.

This change fixes an issue where do_wp_page() was clearing PageMlocked
on the old page while the pte was still pointing to it (as well as
rmap).  Therefore, we were not protected against vmscan immediately
transfering the old page back onto the unevictable list.  This could
cause pages to get stranded there forever.

I propose to move the corresponding code to the end of do_wp_page(),
after the pte (and rmap) have been pointed to the new page.
Additionally, we can use munlock_vma_page() instead of
clear_page_mlock(), so that the old page stays mlocked if there are
still other VM_LOCKED vmas mapping it.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:

	addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
	if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
		printk(KERN_ERR
			"Cannot allocate aperture memory hole (%lx,%uK)\n",
				addr, aper_size>>10);
		return 0;
	}
	memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

fails because memblock core code align the size with 512M.  That could
make size way too big.

So don't align the size in that case.

actually __memblock_alloc_base, the another caller already align that
before calling that function.

BTW. x86 does not use __memblock_alloc_base...
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 2a48fc0a ("block: autoconvert trivial BKL users to private
mutex") replaced uses of the BKL in the nbd driver with mutex
operations.  Since then, I've been been seeing these lock ups:

 INFO: task qemu-nbd:16115 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 qemu-nbd      D 0000000000000001     0 16115  16114 0x00000004
  ffff88007d775d98 0000000000000082 ffff88007d775fd8 ffff88007d774000
  0000000000013a80 ffff8800020347e0 ffff88007d775fd8 0000000000013a80
  ffff880133730000 ffff880002034440 ffffea0004333db8 ffffffffa071c020
 Call Trace:
  [<ffffffff815b9997>] __mutex_lock_slowpath+0xf7/0x180
  [<ffffffff815b93eb>] mutex_lock+0x2b/0x50
  [<ffffffffa071a21c>] nbd_ioctl+0x6c/0x1c0 [nbd]
  [<ffffffff812cb970>] blkdev_ioctl+0x230/0x730
  [<ffffffff811967a1>] block_ioctl+0x41/0x50
  [<ffffffff81175c03>] do_vfs_ioctl+0x93/0x370
  [<ffffffff81175f61>] sys_ioctl+0x81/0xa0
  [<ffffffff8100c0c2>] system_call_fastpath+0x16/0x1b

Instrumenting the nbd module's ioctl handler with some extra logging
clearly shows the NBD_DO_IT ioctl being invoked which is a long-lived
ioctl in the sense that it doesn't return until another ioctl asks the
driver to disconnect.  However, that other ioctl blocks, waiting for the
module-level mutex that replaced the BKL, and then we're stuck.

This patch removes the module-level mutex altogether.  It's clearly
wrong, and as far as I can see, it's entirely unnecessary, since the nbd
driver maintains per-device mutexes, and I don't see anything that would
require a module-level (or kernel-level, for that matter) mutex.
Signed-off-by: NSoren Hansen <soren@linux2go.dk>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Acked-by: NPaul Clements <paul.clements@steeleye.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>		[2.6.37.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In file drivers/rtc/rtc-proc.c seq_open() can return -ENOMEM.

 86        if (!try_module_get(THIS_MODULE))
 87                return -ENODEV;
 88
 89        return single_open(file, rtc_proc_show, rtc);

In this case before exiting (line 89) from rtc_proc_open the
module_put(THIS_MODULE) must be called.

Found by Linux Device Drivers Verification Project
Signed-off-by: NAlexander Strakh <strakh@ispras.ru>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a mutex to register communication and handling.  Without the mutex,
GPIOs didn't switch as expected when toggled in a fast sequence of
status changes of multiple outputs.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The wake_up_process() call in ptrace_detach() is spurious and not
interlocked with the tracee state.  IOW, the tracee could be running or
sleeping in any place in the kernel by the time wake_up_process() is
called.  This can lead to the tracee waking up unexpectedly which can be
dangerous.

The wake_up is spurious and should be removed but for now reduce its
toxicity by only waking up if the tracee is in TRACED or STOPPED state.

This bug can possibly be used as an attack vector.  I don't think it
will take too much effort to come up with an attack which triggers oops
somewhere.  Most sleeps are wrapped in condition test loops and should
be safe but we have quite a number of places where sleep and wakeup
conditions are expected to be interlocked.  Although the window of
opportunity is tiny, ptrace can be used by non-privileged users and with
some loading the window can definitely be extended and exploited.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit fa0d7e3d ("fs: icache RCU free inodes"), we use rcu free
inode instead of freeing the inode directly.  It causes a crash when we
rmmod immediately after we umount the volume[1].

So we need to call rcu_barrier after we kill_sb so that the inode is
freed before we do rmmod.  The idea is inspired by Aneesh Kumar.
rcu_barrier will wait for all callbacks to end before preceding.  The
original patch was done by Tao Ma, but synchronize_rcu() is not enough
here.

1. http://marc.info/?l=linux-fsdevel&m=129680863330185&w=2Tested-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit 31e6b01f ("fs: rcu-walk for path lookup") we started doing
path lookup using RCU, which then falls back to a careful non-RCU lookup
in case of problems (LOOKUP_REVAL).  So do_filp_open() has this "re-do
the lookup carefully" looping case.

However, that means that we must not release the open-intent file data
if we are going to loop around and use it once more!

Fix this by moving the release of the open-intent data to the function
that allocates it (do_filp_open() itself) rather than the helper
functions that can get called multiple times (finish_open() and
do_last()).  This makes the logic for the lifetime of that field much
more obvious, and avoids the possible double free.
Reported-by: NJ. R. Okajima <hooanon05@yahoo.co.jp>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent commit to use cmwq for send and recv threads
dcce240e introduced problems,
apparently due to multiple workqueue threads.  Single threads
make the problems go away, so return to that until we fully
understand the concurrency issues with multiple threads.
Signed-off-by: NDavid Teigland <teigland@redhat.com>

Eric Paris noted that commit de139a33 ("pci: check caps from sysfs file
open to read device dependent config space") caused the capability check
to bypass security modules and potentially auditing.  Rectify this by
calling security_capable() when checking the open file's capabilities
for config space reads.
Reported-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

Expand security_capable() to include cred, so that it can be usable in a
wider range of call sites.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Slight revision to this patch...use min_t() instead of conditional
assignment. Also, remove the FIXME comment and replace it with the
explanation that Steve gave earlier.

After receiving a packet, we currently check the header. If it's no
good, then we toss it out and continue the loop, leaving the caller
waiting on that response.

In cases where the packet has length inconsistencies, but the MID is
valid, this leads to unneeded delays. That's especially problematic now
that the client waits indefinitely for responses.

Instead, don't immediately discard the packet if checkSMB fails. Try to
find a matching mid_q_entry, mark it as having a malformed response and
issue the callback.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

The current TPM TIS driver in git discards the timeout values returned
from the TPM. The check of the response packet needs to consider that
the return_code field is 0 on success and the size of the expected
packet is equivalent to the header size + u32 length indicator for the
TPM_GetCapability() result + 3 timeout indicators of type u32.

I am also adding a sysfs entry 'timeouts' showing the timeouts that are
being used.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: NGuillaume Chazarain <guichaz@gmail.com>
Signed-off-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>

This patch fixes an OOPS triggered when calling modprobe ipmi_si a
second time after the first modprobe returned without finding any ipmi
devices.  This can happen if you reload the module after having the
first module load fail.  The driver was not deregistering from PNP in
that case.

Peter Huewe originally reported this patch and supplied a fix, I have a
different patch based on Linus' suggestion that cleans things up a bit
more.

Cc: stable@kernel.org
Cc: openipmi-developer@lists.sourceforge.net
Reviewed-by: NPeter Huewe <peterhuewe@gmx.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit ce6ada35 ("security: Define CAP_SYSLOG") Serge Hallyn
introduced CAP_SYSLOG, but broke backwards compatibility by no longer
accepting CAP_SYS_ADMIN as an override (it would cause a warning and
then reject the operation).

Re-instate CAP_SYS_ADMIN - but keeping the warning - as an acceptable
capability until any legacy applications have been updated.  There are
apparently applications out there that drop all capabilities except for
CAP_SYS_ADMIN in order to access the syslog.

(This is a re-implementation of a patch by Serge, cleaning the logic up
and making the code more readable)
Acked-by: NSerge Hallyn <serge@hallyn.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously we were relying on it being pulled in by other headers for
the prototype of s3c24xx_irq_suspend() and s3c24xx_irq_resume().
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>