- 06 2月, 2013 1 次提交
-
-
由 Michal Kubecek 提交于
Function xfrm4_policy_fini() is unused since xfrm4_fini() was removed in 2.6.11. Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 13 11月, 2012 1 次提交
-
-
由 Steffen Klassert 提交于
The xfrm gc threshold value depends on ip_rt_max_size. This value was set to INT_MAX with the routing cache removal patch, so we start doing garbage collecting when we have INT_MAX/2 IPsec routes cached. Fix this by going back to the static threshold of 1024 routes. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 09 10月, 2012 1 次提交
-
-
由 Julian Anastasov 提交于
Add new flag to remember when route is via gateway. We will use it to allow rt_gateway to contain address of directly connected host for the cases when DST_NOCACHE is used or when the NH exception caches per-destination route without DST_NOCACHE flag, i.e. when routes are not used for other destinations. By this way we force the neighbour resolving to work with the routed destination but we can use different address in the packet, feature needed for IPVS-DR where original packet for virtual IP is routed via route to real IP. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2012 1 次提交
-
-
由 David S. Miller 提交于
When a device is unregistered, we have to purge all of the references to it that may exist in the entire system. If a route is uncached, we currently have no way of accomplishing this. So create a global list that is scanned when a network device goes down. This mirrors the logic in net/core/dst.c's dst_ifdown(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2012 6 次提交
-
-
由 David S. Miller 提交于
That is this value's only use, as a boolean to indicate whether a route is an input route or not. So implement it that way, using a u16 gap present in the struct already. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Never actually used. It was being set on output routes to the original OIF specified in the flow key used for the lookup. Adjust the only user, ipmr_rt_fib_lookup(), for greater correctness of the flowi4_oif and flowi4_iif values, thanks to feedback from Julian Anastasov. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Miller 提交于
They are always used in contexts where they can be reconstituted, or where the finally resolved rt->rt_{src,dst} is semantically equivalent. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 2 次提交
-
-
由 David S. Miller 提交于
No longer necessary. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2012 2 次提交
-
-
由 David S. Miller 提交于
No longer used. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Maintaining this in the inetpeer entries was not the right way to do this at all. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2012 1 次提交
-
-
由 David S. Miller 提交于
We encode the pointer(s) into an unsigned long with one state bit. The state bit is used so we can store the inetpeer tree root to use when resolving the peer later. Later the peer roots will be per-FIB table, and this change works to facilitate that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 4月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
This results in code with less boiler plate that is a bit easier to read. Additionally stops us from using compatibility code in the sysctl core, hastening the day when the compatibility code can be removed. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2012 1 次提交
-
-
由 Daniel Baluta 提交于
Fix checkpatch errors of the following type: * ERROR: "foo * bar" should be "foo *bar" * ERROR: "(foo*)" should be "(foo *)" Signed-off-by: NDaniel Baluta <dbaluta@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2011 1 次提交
-
-
由 Yan, Zheng 提交于
There is bug in commit 5e2b61f7(ipv4: Remove flowi from struct rtable). It makes xfrm4_fill_dst() modify wrong data structure. Signed-off-by: NZheng Yan <zheng.z.yan@intel.com> Reported-by: NKim Phillips <kim.phillips@freescale.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
There are enough instances of this: iph->frag_off & htons(IP_MF | IP_OFFSET) that a helper function is probably warranted. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Rearrange xfrm4_dst_lookup() so that it works by calling a helper function __xfrm_dst_lookup() that takes an explicit flow key storage area as an argument. Use this new helper in xfrm4_get_saddr() so we can fetch the selected source address from the flow instead of from rt->rt_src Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2011 1 次提交
-
-
由 David S. Miller 提交于
To more accurately reflect that it is purely a routing cache lookup key and is used in no other context. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2011 1 次提交
-
-
由 OGAWA Hirofumi 提交于
Commit 1018b5c0 ("Set rt->rt_iif more sanely on output routes.") breaks rt_is_{output,input}_route. This became the cause to return "IP_PKTINFO's ->ipi_ifindex == 0". To fix it, this does: 1) Add "int rt_route_iif;" to struct rtable 2) For input routes, always set rt_route_iif to same value as rt_iif 3) For output routes, always set rt_route_iif to zero. Set rt_iif as it is done currently. 4) Change rt_is_{output,input}_route() to test rt_route_iif Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2011 5 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2011 1 次提交
-
-
由 David S. Miller 提交于
The only necessary parts are the src/dst addresses, the interface indexes, the TOS, and the mark. The rest is unnecessary bloat, which amounts to nearly 50 bytes on 64-bit. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Instead of on the stack. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2011 1 次提交
-
-
由 David S. Miller 提交于
That way we don't have to potentially do this in every xfrm_lookup() caller. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 2月, 2011 2 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Routing metrics are now copy-on-write. Initially a route entry points it's metrics at a read-only location. If a routing table entry exists, it will point there. Else it will point at the all zero metric place-holder called 'dst_default_metrics'. The writeability state of the metrics is stored in the low bits of the metrics pointer, we have two bits left to spare if we want to store more states. For the initial implementation, COW is implemented simply via kmalloc. However future enhancements will change this to place the writable metrics somewhere else, in order to increase sharing. Very likely this "somewhere else" will be the inetpeer cache. Note also that this means that metrics updates may transiently fail if we cannot COW the metrics successfully. But even by itself, this patch should decrease memory usage and increase cache locality especially for routing workloads. In those cases the read-only metric copies stay in place and never get written to. TCP workloads where metrics get updated, and those rare cases where PMTU triggers occur, will take a very slight performance hit. But that hit will be alleviated when the long-term writable metrics move to a more sharable location. Since the metrics storage went from a u32 array of RTAX_MAX entries to what is essentially a pointer, some retooling of the dst_entry layout was necessary. Most importantly, we need to preserve the alignment of the reference count so that it doesn't share cache lines with the read-mostly state, as per Eric Dumazet's alignment assertion checks. The only non-trivial bit here is the move of the 'flags' member into the writeable cacheline. This is OK since we are always accessing the flags around the same moment when we made a modification to the reference count. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2010 1 次提交
-
-
由 Changli Gao 提交于
Use the macros defined for the members of flowi to clean the code up. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2010 1 次提交
-
-
由 Timo Teräs 提交于
The GRE Key field is intended to be used for identifying an individual traffic flow within a tunnel. It is useful to be able to have XFRM policy selector matches to have different policies for different GRE tunnels. Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
It seems idev field in struct rtable has no special purpose, but adding extra atomic ops. We hold refcounts on the device itself (using percpu data, so pretty cheap in current kernel). infiniband case is solved using dst.dev instead of idev->dev Removal of this field means routing without route cache is now using shared data, percpu data, and only potential contention is a pair of atomic ops on struct neighbour per forwarded packet. About 5% speedup on routing test. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-