For -mprofile-kernel, we need special handling when generating stubs for
ftrace calls such as _mcount(). To faciliate this, we check if a
R_PPC64_REL24 relocation is for a symbol named "_mcount()" along with
also checking the instruction sequence. The latter is not really
required since "_mcount()" is an exported symbol and kernel modules
cannot use it. As such, drop the additional checking and simplify the
code. This helps unify stub creation for ftrace stubs with
-mprofile-kernel and aids in code reuse.

Also rename is_mprofile_mcount_callsite() to is_mprofile_ftrace_call()
to reflect the checking being done.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7d9c316adfa1fb787ad268bb4691e7e4059ff2d5.1587488954.git.naveen.n.rao@linux.vnet.ibm.com

module_trampoline_target() is only used by ftrace. Move the prototype
within the appropriate #ifdef in the header. Also, move the function
body to the end of module_64.c so as to consolidate all ftrace code in
one place.

No functional changes.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2527351f65c53c5866068ae130dc34c5d4ee8ad9.1587488954.git.naveen.n.rao@linux.vnet.ibm.com

Mapping of early shadow area is implemented by using a single static
page table having all entries pointing to the same early shadow page.
The shadow area must therefore occupy full PGD entries.

The shadow area has a size of 128MB starting at 0xf8000000.
With 4k pages, a PGD entry is 4MB
With 16k pages, a PGD entry is 64MB
With 64k pages, a PGD entry is 1GB which is too big.

Until we rework the early shadow mapping, disable KASAN when the page
size is too big.

Fixes: 2edb16ef ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7195fcde7314ccbf7a081b356084a69d421b10d4.1590660977.git.christophe.leroy@csgroup.eu

On book3s/32, KUEP is an heavy process as it requires to
set/unset the NX bit in each of the 12 user segments
everytime the kernel is entered/exited from/to user space.

Don't select KUEP by default on book3s/32.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1492bb150c1aaa53d99a604b49992e60ea20cd5f.1586962582.git.christophe.leroy@c-s.fr

On book3s/32, KUAP is an heavy process as it requires to
determine which segments are impacted and unlock/lock
each of them.

And since the implementation of user_access_begin/end, it
is even worth for the time being because unlike __get_user(),
user_access_begin doesn't make difference between read and write
and unlocks access also for read allthought that's unneeded
on book3s/32.

As shown by the size of a kernel built with KUAP and one without,
the overhead is 64k bytes of code. As a comparison a similar
build on an 8xx has an overhead of only 8k bytes of code.

   text	   data	    bss	    dec	    hex	filename
7230416	1425868	 837376	9493660	 90dc9c	vmlinux.kuap6xx
7165012	1425548	 837376	9427936	 8fdbe0	vmlinux.nokuap6xx
6519796	1960028	 477464	8957288	 88ad68	vmlinux.kuap8xx
6511664	1959864	 477464	8948992	 888d00	vmlinux.nokuap8xx

Until a more optimised KUAP is implemented on book3s/32,
don't select it by default.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/154a99399317b096ac1f04827b9f8d7a9179ddc1.1586962586.git.christophe.leroy@c-s.fr

To enable/disable kernel access to user space, the 8xx has to
modify the properties of access group 1. This is done by writing
predefined values into SPRN_Mx_AP registers.

As of today, a __put_user() gives:

00000d64 <my_test>:
 d64:	3d 20 4f ff 	lis     r9,20479
 d68:	61 29 ff ff 	ori     r9,r9,65535
 d6c:	7d 3a c3 a6 	mtspr   794,r9
 d70:	39 20 00 00 	li      r9,0
 d74:	90 83 00 00 	stw     r4,0(r3)
 d78:	3d 20 6f ff 	lis     r9,28671
 d7c:	61 29 ff ff 	ori     r9,r9,65535
 d80:	7d 3a c3 a6 	mtspr   794,r9
 d84:	4e 80 00 20 	blr

Because only groups 0 and 1 are used, the definition of
groups 2 to 15 doesn't matter.
By setting unused bits to 0 instead on 1, one instruction is
removed for each lock and unlock action:

00000d5c <my_test>:
 d5c:	3d 20 40 00 	lis     r9,16384
 d60:	7d 3a c3 a6 	mtspr   794,r9
 d64:	39 20 00 00 	li      r9,0
 d68:	90 83 00 00 	stw     r4,0(r3)
 d6c:	3d 20 60 00 	lis     r9,24576
 d70:	7d 3a c3 a6 	mtspr   794,r9
 d74:	4e 80 00 20 	blr
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57425c33dd72f292b1a23570244b81419072a7aa.1586945153.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode.

The very last part of exception exits cannot support a trap.
Blacklist them from kprobe.

While we are at it, remove exc_exit_start symbol which is not
used to avoid having to blacklist it.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/098b0fd3f6299aa1bd692bd576bd7012c84608de.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode.

The very last part of syscall cannot support a trap.
Add a symbol syscall_exit_finish to identify that part and
blacklist it from kprobe.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/23eddf49abb03d1359fa0be4206998eb3800f42c.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode.

As exception entry points are running with MMU disabled,
blacklist them.

The handling of TLF_NAPPING and TLF_SLEEPING is moved before the
CONFIG_TRACE_IRQFLAGS which contains 'reenable_mmu' because from there
kprobe will be possible as the kernel will run with MMU enabled.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f61ac599855e674ebb592464d0ea32a3ba9c6644.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3bf57066d05518644dee0840af69d36ab5086729.1585670437.git.christophe.leroy@c-s.fr

machine_check_in_rtas() is just a trap.

Do the trap directly in the machine check exception handler.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/78899f40f89cb3c4f69bdff7f04eb6ec7cb753d5.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dabed523c1b8955dd425152ce260b390053e727a.1585670437.git.christophe.leroy@c-s.fr

In hash_low.S, a lot of named local symbols are used instead of
numbers to ease code readability. However, they don't need to be
visible.

In order to ease blacklisting of functions running with MMU
disabled for kprobe, rename the symbols to .Lsymbols in order
to hide them as if they were numbered labels.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/90c430d9e0f7af772a58aaeaf17bcc6321265340.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eaab3bff961c3bfe149f1d0bd3593291ef939dcc.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6316e8883753499073f47301857e4e88b73c3ddd.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3ac4ab8dd7008b9706d9228a60645a1756fa84bf.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5dca36682383577a3c2b2bca4d577e8654944461.1585670437.git.christophe.leroy@c-s.fr

kprobe does not handle events happening in real mode, all
functions running with MMU disabled have to be blacklisted.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1ae02b6637b87fc5aaa1d5012c3e2cb30e62b4a3.1585670437.git.christophe.leroy@c-s.fr

In order to avoid Oopses, use probe_address() to read the
instruction at the address where the trap happened.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7f24b5961a6839ff01df792816807f74ff236bf6.1582567319.git.christophe.leroy@c-s.fr

This gives us OF_PMEM which is useful in mambo.

This adds 153K to the text of ppc64le_defconfig which 0.8% of the
total text.

  LIBNVDIMM text     data    bss     dec      hex
  Without   18574833 5518150 1539240 25632223 1871ddf
  With      18727834 5546206 1539368 25813408 189e1a0
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200519043009.3081885-1-mikey@neuling.org

Implement rtas_call_reentrant() for reentrant rtas-calls:
"ibm,int-on", "ibm,int-off",ibm,get-xive" and  "ibm,set-xive".

On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4,
items 2 and 3 say:

2 - For the PowerPC External Interrupt option: The * call must be
reentrant to the number of processors on the platform.
3 - For the PowerPC External Interrupt option: The * argument call
buffer for each simultaneous call must be physically unique.

So, these rtas-calls can be called in a lockless way, if using
a different buffer for each cpu doing such rtas call.

For this, it was suggested to add the buffer (struct rtas_args)
in the PACA struct, so each cpu can have it's own buffer.
The PACA struct received a pointer to rtas buffer, which is
allocated in the memory range available to rtas 32-bit.

Reentrant rtas calls are useful to avoid deadlocks in crashing,
where rtas-calls are needed, but some other thread crashed holding
the rtas.lock.

This is a backtrace of a deadlock from a kdump testing environment:

  #0 arch_spin_lock
  #1  lock_rtas ()
  #2  rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
  #3  ics_rtas_mask_real_irq (hw_irq=4100)
  #4  machine_kexec_mask_interrupts
  #5  default_machine_crash_shutdown
  #6  machine_crash_shutdown
  #7  __crash_kexec
  #8  crash_kexec
  #9  oops_end
Signed-off-by: NLeonardo Bras <leobras.c@gmail.com>
[mpe: Move under #ifdef PSERIES to avoid build breakage]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-3-leobras.c@gmail.com

In order to get any rtas* struct into other headers, including rtas.h
may cause a lot of errors, regarding include dependency needed for
inline functions.

Create rtas-types.h and move there all type/struct definitions
from rtas.h, then include rtas-types.h into rtas.h.

Also, as suggested by checkpath.pl, replace uint8_t for u8.
Signed-off-by: NLeonardo Bras <leobras.c@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200518234245.200672-2-leobras.c@gmail.com

Currently, if printk lock (logbuf_lock) is held by other thread during
crash, there is a chance of deadlocking the crash on next printk, and
blocking a possibly desired kdump.

At the start of default_machine_crash_shutdown, make printk enter
NMI context, as it will use per-cpu buffers to store the message,
and avoid locking logbuf_lock.
Suggested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NLeonardo Bras <leobras.c@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200512214533.93878-1-leobras.c@gmail.com

While providing guests, it's desirable to resize it's memory on demand.

By now, it's possible to do so by creating a guest with a small base
memory, hot-plugging all the rest, and using 'movable_node' kernel
command-line parameter, which puts all hot-plugged memory in
ZONE_MOVABLE, allowing it to be removed whenever needed.

But there is an issue regarding guest reboot:
If memory is hot-plugged, and then the guest is rebooted, all hot-plugged
memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal.
It usually prevents this memory to be hot-removed from the guest.

It's possible to use device-tree information to fix that behavior, as
it stores flags for LMB ranges on ibm,dynamic-memory-vN.
It involves marking each memblock with the correct flags as hotpluggable
memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if
'movable_node' is passed.

For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was
proposed and accepted into Power Architecture documentation.
This flag should be:
- true (b=1) if the hypervisor may want to hot-remove it later, and
- false (b=0) if it does not care.

During boot, guest kernel reads the device-tree, early_init_drmem_lmb()
is called for every added LMBs. Here, checking for this new flag and
marking memblocks as hotplugable memory is enough to get the desirable
behavior.

This should cause no change if 'movable_node' parameter is not passed
in kernel command-line.
Signed-off-by: NLeonardo Bras <leonardo@linux.ibm.com>
Reviewed-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200402195156.626430-1-leonardo@linux.ibm.com

Show the address of the tasks regs in the process listing in xmon. The
regs should always be on the stack page that we also print the address
of, but it's still helpful not to have to find them by hand.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520111740.953679-1-mpe@ellerman.id.au

This adds the CPU or thread number to printk messages. This helps a
lot when deciphering concurrent oopses that have been interleaved.

Example output, of PID1 (T1) triggering a warning:

  [    1.581678][    T1] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x38/0x140
  [    1.581681][    T1] Modules linked in:
  [    1.581693][    T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty #1515
  [    1.581700][    T1] NIP:  c000000000207d64 LR: c000000000207d3c CTR: c000000000207d2c
  [    1.581708][    T1] REGS: c0000000fd2e7560 TRAP: 0700   Not tainted  (5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty)
  [    1.581712][    T1] MSR:  9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 44000222  XER: 00040000
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520121257.961112-1-mpe@ellerman.id.au

Currently when we boot on a big core system, we get this print:
  [    0.040500] Using small cores at SMT level

This is misleading as we've actually detected big cores.

This patch clears up the print to say we've detect big cores but are
using small cores for scheduling.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200528230731.1235752-1-mikey@neuling.org

If the memory chunk found for reserving memory overshoots the memory
limit imposed, do not proceed with reserving memory. Default behavior
was this until commit 140777a3 ("powerpc/fadump: consider reserved
ranges while reserving memory") changed it unwittingly.

Fixes: 140777a3 ("powerpc/fadump: consider reserved ranges while reserving memory")
Cc: stable@vger.kernel.org
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/159057266320.22331.6571453892066907320.stgit@hbathini.in.ibm.com

'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.

E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.

This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
    if (fadump_reserve_mem() == 0)
            reserve_crashkernel();
    ...
    /* Ensure that total memory size is page-aligned. */
    limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
    memblock_enforce_memory_limit(limit);

While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().
Signed-off-by: NPingfan Liu <kernelfans@gmail.com>
Reviewed-by: NHari Bathini <hbathini@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com

kbuild test robot reported some build warnings in the hw_breakpoint
code when compiled with clang[1]. Some of them were introduced by the
recent powerpc change to add arch_reserve_bp_slot() and
arch_release_bp_slot(). Fix them all.

  kernel/events/hw_breakpoint.c:71:12: warning: no previous prototype for function 'hw_breakpoint_weight'
  kernel/events/hw_breakpoint.c:216:12: warning: no previous prototype for function 'arch_reserve_bp_slot'
  kernel/events/hw_breakpoint.c:221:13: warning: no previous prototype for function 'arch_release_bp_slot'
  kernel/events/hw_breakpoint.c:228:13: warning: no previous prototype for function 'arch_unregister_hw_breakpoint'

[1]: https://lore.kernel.org/linuxppc-dev/202005192233.oi9CjRtA%25lkp@intel.com/

Fixes: 29da4f91 ("powerpc/watchpoint: Don't allow concurrent perf and ptrace events")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
[mpe: Drop extern, flesh out change log, add Fixes tag]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602041208.128913-1-ravi.bangoria@linux.ibm.com

XIVE interrupt controller uses an Event Queue (EQ) to enqueue event
notifications when an exception occurs. The EQ is a single memory page
provided by the O/S defining a circular buffer, one per server and
priority couple.

On baremetal, the EQ page is configured with an OPAL call. On pseries,
an extra hop is necessary and the guest OS uses the hcall
H_INT_SET_QUEUE_CONFIG to configure the XIVE interrupt controller.

The XIVE controller being Hypervisor privileged, it will not be allowed
to enqueue event notifications for a Secure VM unless the EQ pages are
shared by the Secure VM.

Hypervisor/Ultravisor still requires support for the TIMA and ESB page
fault handlers. Until this is complete, QEMU can use the emulated XIVE
device for Secure VMs, option "kernel_irqchip=off" on the QEMU pseries
machine.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Reviewed-by: NCedric Le Goater <clg@kaod.org>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426020518.GC5853@oc0525413822.ibm.com

Function 'read_sys_info_pseries()' is added to get system parameter
values like number of sockets and chips per socket.
and it gets these details via rtas_call with token
"PROCESSOR_MODULE_INFO".

Incase lpar migrate from one system to another, system
parameter details like chips per sockets or number of sockets might
change. So, it needs to be re-initialized otherwise, these values
corresponds to previous system values.
This patch adds a call to 'read_sys_info_pseries()' from
'post-mobility_fixup()' to re-init the physsockets and physchips values
Signed-off-by: NKajol Jain <kjain@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-6-kjain@linux.ibm.com

Add documentation for the following sysfs files:
/sys/devices/hv_24x7/interface/chipspersocket,
/sys/devices/hv_24x7/interface/sockets,
/sys/devices/hv_24x7/interface/coresperchip
Signed-off-by: NKajol Jain <kjain@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-5-kjain@linux.ibm.com

To expose the system dependent parameter like total number of
sockets and numbers of chips per socket, patch adds two sysfs files.
"sockets" and "chips" are added to /sys/devices/hv_24x7/interface/
of the "hv_24x7" pmu.
Signed-off-by: NKajol Jain <kjain@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-4-kjain@linux.ibm.com

For hv_24x7 socket/chip level events, specific chip-id to which
the data requested should be added as part of pmu events.
But number of chips/socket in the system details are not exposed.

Patch implements read_24x7_sys_info() to get system parameter values
like number of sockets, cores per chip and chips per socket. Rtas_call
with token "PROCESSOR_MODULE_INFO" is used to get these values.

Subsequent patch exports these values via sysfs.

Patch also make these parameters default to 1.
Signed-off-by: NKajol Jain <kjain@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-3-kjain@linux.ibm.com

Commit 2b206ee6 ("powerpc/perf/hv-24x7: Display change in counter
values")' added to print _change_ in the counter value rather then raw
value for 24x7 counters. Incase of transactions, the event count
is set to 0 at the beginning of the transaction. It also sets
the event's prev_count to the raw value at the time of initialization.
Because of setting event count to 0, we are seeing some weird behaviour,
whenever we run multiple 24x7 events at a time.

For example:

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
			   hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
	  		   -C 0 -I 1000 sleep 100

     1.000121704                120 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     1.000121704                  5 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     2.000357733                  8 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     2.000357733                 10 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     3.000495215 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.000641884                 56 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     4.000641884 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     5.000791887 18,446,744,073,709,551,616 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/

Getting these large values in case we do -I.

As we are setting event_count to 0, for interval case, overall event_count is not
coming in incremental order. As we may can get new delta lesser then previous count.
Because of which when we print intervals, we are getting negative value which create
these large values.

This patch removes part where we set event_count to 0 in function
'h_24x7_event_read'. There won't be much impact as we do set event->hw.prev_count
to the raw value at the time of initialization to print change value.

With this patch
In power9 platform

command#: ./perf stat -e "{hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/,
		           hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/}"
			   -C 0 -I 1000 sleep 100

     1.000117685                 93 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     1.000117685                  1 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     2.000349331                 98 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     2.000349331                  2 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     3.000495900                131 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     3.000495900                  4 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.000645920                204 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
     4.000645920                 61 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=1/
     4.284169997                 22 hv_24x7/PM_MCS01_128B_RD_DISP_PORT01,chip=0/
Suggested-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NKajol Jain <kjain@linux.ibm.com>
Tested-by: NMadhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200525104308.9814-2-kjain@linux.ibm.com

pnv_pci_ioda_configure_bus() should now only ever be called when a device is
added to the bus so add a WARN_ON() to the empty bus check. Similarly,
pnv_pci_ioda_setup_bus_PE() should only ever be called for an unconfigured PE,
so add a WARN_ON() for that case too.
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-5-oohall@gmail.com

Doing it once during boot rather than doing it on the fly and drop the janky
populated logic.
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-4-oohall@gmail.com

For normal PHBs IODA PEs are handled on a per-bus basis so all the devices
on that bus will share a PE. Which PE specificly is determined by the location
of the MMIO BARs for the devices on the bus so we can't actually configure the
bus PEs until after MMIO resources are allocated. As a result PEs are currently
configured by pcibios_setup_bridge(), which is called just before the bridge
windows are programmed into the bus' parent bridge. Configuring the bus PE here
causes a few problems:

1. The root bus doesn't have a parent bridge so setting up the PE for the root
   bus requires some hacks.

2. The PELT-V isn't setup correctly because pnv_ioda_set_peltv() assumes that
   PEs will be configured in root-to-leaf order. This assumption is broken
   because resource assignment is performed depth-first so the leaf bridges
   are setup before their parents are. The hack mentioned in 1) results in
   the "correct" PELT-V for busses immediately below the root port, but not
   for devices below a switch.

3. It's possible to break the sysfs PCI rescan feature by removing all
   the devices on a bus. When the last device is removed from a PE its
   will be de-configured. Rescanning the devices on a bus does not cause
   the bridge to be reconfigured rendering the devices on that bus
   unusable.

We can address most of these problems by moving the PE setup out of
pcibios_setup_bridge() and into pcibios_bus_add_device(). This fixes 1)
and 2) because pcibios_bus_add_device() is called on each device in
root-to-leaf order so PEs for parent buses will always be configured
before their children. It also fixes 3) by ensuring the PE is
configured before initialising DMA for the device. In the event the PE
was de-configured due to removing all the devices in that PE it will
now be reconfigured when a new device is added since there's no
dependecy on the bridge_setup() hook being called.
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-3-oohall@gmail.com

For each PHB we maintain a reverse-map that can be used to find the
PE that a BDFN is currently mapped to. Add a helper for doing this
lookup so we can check if a PE has been configured without looking
at pdn->pe_number.
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200417073508.30356-2-oohall@gmail.com