Commit ed458df4 ("PnP: move
pnpacpi/pnpbios_init to after PCI init") moved the PnP RTC discovery
later, and now the ACPI RTC glue code doesn't find it any more, breaking
the RTC wakealarm sysfs interfaces, as reported by Rafael.

This really is fairly messy, and we have several annoying ordering
constraints here - the PnP code that sets up the RTC resources wants to
run after the PCI resources have to be registered, which in turn needs
to run after ACPI has at least enumerated the root PCI buses etc.  Our
initcall ordering is not fine-grained enough to make this all painless.

So this moves the ACPI RTC glue ("acpi_rtc_init()") down to a regular
module call, which fixes the problem Rafael has.  The reason this isn't
wonderful is that we really should do acpi_rtc_init before we do the
rtc_cmos init, and now those two are in the same module_init() section.

Which happens to work, but only because drivers/rtc is linked after
drivers/acpi.  In other words, we still have a very subtle ordering
issue here. Grr.
Reported-and-tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
  ext4: Rename ext4dev to ext4
  ext4: Avoid double dirtying of super block in ext4_put_super()
  Update ext4 MAINTAINERS file
  Hook ext4 to the vfs fiemap interface.
  generic block based fiemap implementation
  ocfs2: fiemap support
  vfs: vfs-level fiemap interface
  ext4: fix xattr deadlock
  jbd2: Fix buffer head leak when writing the commit block
  ext4: Add debugging markers that can be used by systemtap
  jbd2: abort instead of waiting for nonexistent transaction
  ext4: fix initialization of UNINIT bitmap blocks
  ext4: Remove old legacy block allocator
  ext4: Use readahead when reading an inode from the inode table
  ext4: Improve the documentation for ext4's /proc tunables
  ext4: Combine proc file handling into a single set of functions
  ext4: move /proc setup and teardown out of mballoc.c
  ext4: Don't use 'struct dentry' for internal lookups
  ext4/jbd2: Avoid WARN() messages when failing to write to the superblock
  ext4: use percpu data structures for lg_prealloc_list
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (71 commits)
  ide: Remove ide_spin_wait_hwgroup() and use special requests instead
  ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h>
  ide: add ide_do_test_unit_ready() helper
  ide: add ide_do_start_stop() helper
  ide: add ide_set_media_lock() helper
  ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.c
  ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP}
  ide: add ide_queue_pc_tail() helper
  ide: add ide_queue_pc_head() helper
  ide: add ide_init_pc() helper
  ide-tape: add ide_tape_set_media_lock() helper
  ide-floppy: add ide_floppy_set_media_lock() helper
  ide: add ide_io_buffers() helper
  ide-scsi: cleanup ide_scsi_io_buffers()
  ide-floppy: remove MODE_SENSE_* defines
  ide-{floppy,tape}: remove packet command stack
  ide-{floppy,tape}: remove request stack
  ide-generic: handle probing of legacy io-ports v5
  ide-floppy: use scatterlists for pio transfers
  ide-tape: remove idetape_init_rq()
  ...

Merge phase #4 (X2APIC, APIC unification, CPU identification unification) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits)
  x86, debug: print more information about unknown CPUs
  x86 setup: handle more than 8 CPU flag words
  x86: cpuid, fix typo
  x86: move transmeta cap read to early_init_transmeta()
  x86: identify_cpu_without_cpuid v2
  x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo
  x86: move VMX MSRs to msr-index.h
  x86: centaur_64.c remove duplicated setting of CONSTANT_TSC
  x86: intel.c put workaround for old cpus together
  x86: let intel 64-bit use intel.c
  x86: make intel_64.c the same as intel.c
  x86: make intel.c have 64-bit support code
  x86: little clean up of intel.c/intel_64.c
  x86: make 64 bit to use amd.c
  x86: make amd_64 have 32 bit code
  x86: make amd.c have 64bit support code
  x86: merge header in amd_64.c
  x86: add srat_detect_node for amd64
  x86: remove duplicated force_mwait
  x86: cpu make amd.c more like amd_64.c v2
  ...

Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/signal_64.c
	include/asm-x86/cpufeature.h

Conflicts:
	arch/x86/kernel/apic_32.c
	arch/x86/kernel/apic_64.c
	arch/x86/kernel/setup.c
	drivers/pci/intel-iommu.c
	include/asm-x86/cpufeature.h
	include/asm-x86/dma-mapping.h

* 'x86-v28-for-linus-phase3-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  AMD IOMMU: use iommu_device_max_index, fix
  AMD IOMMU: use iommu_device_max_index
  x86: add PCI IDs for AMD Barcelona PCI devices
  x86/iommu: use __GFP_ZERO instead of memset for GART
  x86/iommu: convert GART need_flush to bool
  x86/iommu: make GART driver checkpatch clean
  x86 gart: remove unnecessary initialization
  x86: restore old GART alloc_coherent behavior
  revert "x86: make GART to respect device's dma_mask about virtual mappings"
  x86: export pci-nommu's alloc_coherent
  iommu: remove fullflush and nofullflush in IOMMU generic option
  x86: remove set_bit_string()
  iommu: export iommu_area_reserve helper function
  AMD IOMMU: use coherent_dma_mask in alloc_coherent
  add AMD IOMMU tree to MAINTAINERS file
  AMD IOMMU: use cmd_buf_size when freeing the command buffer
  AMD IOMMU: calculate IVHD size with a function
  AMD IOMMU: remove unnecessary cast to u64 in the init code
  AMD IOMMU: free domain bitmap with its allocation order
  AMD IOMMU: simplify dma_mask_to_pages
  ...

* 'x86-v28-for-linus-phase2-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
  x86, cpa: make the kernel physical mapping initialization a two pass sequence, fix
  x86, pat: cleanups
  x86: fix pagetable init 64-bit breakage
  x86: track memtype for RAM in page struct
  x86, cpa: srlz cpa(), global flush tlb after splitting big page and before doing cpa
  x86, cpa: remove cpa pool code
  x86, cpa: no need to check alias for __set_pages_p/__set_pages_np
  x86, cpa: dont use large pages for kernel identity mapping with DEBUG_PAGEALLOC
  x86, cpa: make the kernel physical mapping initialization a two pass sequence
  x86, cpa: remove USER permission from the very early identity mapping attribute
  x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot
  x86: make sure the CPA test code's use of _PAGE_UNUSED1 is obvious
  linux-next: fix x86 tree build failure
  x86: have set_memory_array_{uc,wb} coalesce memtypes, fix
  agp: enable optimized agp_alloc_pages methods
  x86: have set_memory_array_{uc,wb} coalesce memtypes.
  x86: {reverve,free}_memtype() take a physical address
  x86: fix pageattr-test
  agp: add agp_generic_destroy_pages()
  agp: generic_alloc_pages()
  ...

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.

NULL function pointers are very bad security wise. This one got caught by
kerneloops.org quite a few times, so it's happening in the field....

Fix is simple, check the function pointer for NULL, like 6 other places
in the same function are already doing.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dummy version of 'nf_conntrack_event_cache()' (used when the
NF_CONNTRACK_EVENTS config option is not enabled) had not been updated
when the calling convention changed.

This was introduced by commit a71996fc
("netfilter: netns nf_conntrack: pass conntrack to
nf_conntrack_event_cache() not skb")

Tssk.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Check that last search entry resume key is valid
  [CIFS] make sure we have the right resume info before calling CIFSFindNext
  [CIFS]  clean up error handling in cifs_unlink
  [CIFS] fix some settings of cifsAttrs after calling SetFileInfo and SetPathInfo
  cifs: explicitly revoke SPNEGO key after session setup
  cifs: Convert cifs to new aops.
  [CIFS] update DOS attributes in cifsInode if we successfully changed them
  cifs: remove NULL termination from rename target in CIFSSMBRenameOpenFIle
  cifs: work around samba returning -ENOENT on SetFileDisposition call
  cifs: fix inverted NULL check after kmalloc
  [CIFS] clean up upcall handling for dns_resolver keys
  [CIFS]  fix busy-file renames and refactor cifs_rename logic
  cifs: add function to set file disposition
  [CIFS] add constants for string lengths of keynames in SPNEGO upcall string
  cifs: move rename and delete-on-close logic into helper function
  cifs: have find_writeable_file prefer filehandles opened by same task
  cifs: don't use GFP_KERNEL with GFP_NOFS
  [CIFS] use common code for turning off ATTR_READONLY in cifs_unlink
  cifs: clean up variables in cifs_unlink

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (49 commits)
  MIPS: RB532: provide GPIO_BUILTIN_NR and irq_to_gpio/gpio_to_irq
  MIPS: Move ptrace prototypes to ptrace.h
  MIPS: Ptrace support for HARDWARE_WATCHPOINTS
  MIPS: Scheduler support for HARDWARE_WATCHPOINTS.
  MIPS: Watch exception handling for HARDWARE_WATCHPOINTS.
  MIPS: Probe watch registers and report configuration.
  MIPS: Add HARDWARE_WATCHPOINTS definitions and support code.
  MIPS: Add HARDWARE_WATCHPOINTS configure option.
  MIPS: Replace use of <asm-generic/uaccess.h> with native implementations.
  MIPS: TXx9: Add TX4939 ATA support (v2)
  MIPS: Rewrite spinlocks to ticket locks.
  MIPS: IP checksums: Optimize adjust of sum on buffers of odd alignment.
  MIPS: IP checksums: Remove unncessary .set pseudos
  MIPS: IP checksums: Remove unncessary folding of sum to 16 bit.
  MIPS: Move headfiles to new location below arch/mips/include
  MIPS: Alchemy: rename directory
  MIPS: Optimize get_user and put_user for 64-bit
  MIPS: TXx9: Implement prom_free_prom_memory
  MIPS: TXx9: Add RBTX4939 board support
  MIPS: TXx9: Add TX4939 SoC support
  ...

* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits)
  [S390] Fix checkstack for s390
  [S390] fix initialization of stp
  [S390] 3215: Remove tasklet.
  [S390] console flush on panic / reboot
  [S390] introduce dirty bit for kvm live migration
  [S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O
  [S390] xpram: per device block request queues.
  [S390] dasd: fix message flood for unsolicited interrupts
  [S390] Move private simple udelay function to arch/s390/lib/delay.c.
  [S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.
  [S390] ptrace changes
  [S390] s390: use sys_pause for 31bit pause entry point
  [S390] qdio enhanced SIGA (iqdio) support.
  [S390] cio: fix cio_tpi.
  [S390] cio: Correct use of ! and &
  [S390] cio: inline assembly cleanup
  [S390] bus_id -> dev_set_name() for css and ccw busses
  [S390] bus_id ->dev_name() conversions in qdio
  [S390] Use s390_root_dev_* in kvm_virtio.
  [S390] more bus_id -> dev_name conversions
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code
  [CPUFREQ] Don't export governors for default governor
  [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor
  [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor
  [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential
  [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting
  [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination
  [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()
  [CPUFREQ] use deferrable delayed work init in conservative governor
  [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put
  [CPUFREQ] add error handling for cpufreq_register_governor() error
  [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c

This patchs defines the number of built-in the GPIOs present
on the SoC as Documentation/gpio.txt recommends to do.
Define irq_to_gpio/gpio_to_irq to return the right values so that
it fixes a compilation error on drivers/gpio/gpiolib.c
when enabling debugfs.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is the final part of the watch register patch.  Here we hook up
ptrace so that the user space debugger (gdb), can set and read the
registers.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we hook up the scheduler.  Whenever we switch to a new process,
we check to see if the watch registers should be installed, and do it
if needed.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Here we hook up the watch exception handler so that it sends SIGTRAP when
the hardware watch registers are triggered.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Probe for watch register characteristics, and report them in /proc/cpuinfo.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is the main support code for the patch.  Here we just add the
code, the following patches hook it up.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/include/asm/watch.h
 create mode 100644 arch/mips/kernel/watch.c

This is automatically set for all MIPS32 and MIPS64 processors.
Signed-off-by: NDavid Daney <ddaney@avtrex.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add a helper routine to register tx4939ide driver and use it on
RBTX4939 board.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Based on patch by Chad Reese of Cavium Networks.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

They possibly silence meaningful warnings ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It's more than the au1000 these days.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A long for the error value leads to unnecessary sign extensions.  This
patch shrinks an ip27_defconfig kernel build with gcc 4.3.0 by 2256 bytes.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/txx9/rbtx4939/Makefile
 create mode 100644 arch/mips/txx9/rbtx4939/irq.c
 create mode 100644 arch/mips/txx9/rbtx4939/prom.c
 create mode 100644 arch/mips/txx9/rbtx4939/setup.c
 create mode 100644 include/asm-mips/txx9/rbtx4939.h

Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/pci/pci-tx4939.c
 create mode 100644 arch/mips/txx9/generic/irq_tx4939.c
 create mode 100644 arch/mips/txx9/generic/setup_tx4939.c
 create mode 100644 include/asm-mips/txx9/tx4939.h

Add leds-gpio platform device for controlling LEDs connected to IOC on
RBTX49XX and JMR3927 board.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The IOC interrupt status register on RBTX49XX only have 8 bits.  Use
8-bit version of __fls() to optimize interrupt handlers.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

TXx9 SoCs have pin multiplex.  Stop some controller modules which can
not be used due to pin configurations.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>