Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 7
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 5月, 2005 6 次提交
  3. 19 5月, 2005 9 次提交
    • H
      [IPV4/IPV6] Ensure all frag_list members have NULL sk · 2fdba6b0
      由 Herbert Xu 提交于 
      Having frag_list members which holds wmem of an sk leads to nightmares
with partially cloned frag skb's.  The reason is that once you unleash
a skb with a frag_list that has individual sk ownerships into the stack
you can never undo those ownerships safely as they may have been cloned
by things like netfilter.  Since we have to undo them in order to make
skb_linearize happy this approach leads to a dead-end.

So let's go the other way and make this an invariant:

	For any skb on a frag_list, skb->sk must be NULL.

That is, the socket ownership always belongs to the head skb.
It turns out that the implementation is actually pretty simple.

The above invariant is actually violated in the following patch
for a short duration inside ip_fragment.  This is OK because the
offending frag_list member is either destroyed at the end of the
slow path without being sent anywhere, or it is detached from
the frag_list before being sent.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2fdba6b0
    • E
      [XFRM]: skb_cow_data() does not set proper owner for new skbs. · d4810200
      由 Evgeniy Polyakov 提交于 
      It looks like skb_cow_data() does not set 
proper owner for newly created skb.

If we have several fragments for skb and some of them
are shared(?) or cloned (like in async IPsec) there 
might be a situation when we require recreating skb and 
thus using skb_copy() for it.
Newly created skb has neither a destructor nor a socket
assotiated with it, which must be copied from the old skb.
As far as I can see, current code sets destructor and socket
for the first one skb only and uses truesize of the first skb
only to increment sk_wmem_alloc value.

If above "analysis" is correct then attached patch fixes that.
Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d4810200
    • D
      [TG3]: In tg3_poll(), resample status_tag after doing work. · f7383c22
      由 David S. Miller 提交于 
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7383c22
    • D
      [TG3]: Refine DMA boundary setting. · 59e6b434
      由 David S. Miller 提交于 
      Extract DMA boundary bit selection into a seperate
function, tg3_calc_dma_bndry().  Call this from
tg3_test_dma().

Make DMA test more reliable by using no DMA boundry
setting during the test.  If the test passes, then
use the setting we selected before the test.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
      59e6b434
    • D
      [TG3]: Set minimal hw interrupt mitigation. · 15f9850d
      由 David S. Miller 提交于 
      Even though we do software interrupt mitigation
via NAPI, it still helps to have some minimal
hw assisted mitigation.

This helps, particularly, on systems where register
I/O overhead is much greater than the CPU horsepower.

For example, it helps on NUMA systems.  In such cases
the PIO overhead to disable interrupts for NAPI accounts
for the majority of the packet processing cost.  The
CPU is fast enough such that only a single packet is
processed by each NAPI poll call.

Thanks to Michael Chan for reviewing this patch.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      15f9850d
    • D
      [TG3]: Add tagged status support. · fac9b83e
      由 David S. Miller 提交于 
      When supported, use the TAGGED interrupt processing support
the chip provides.  In this mode, instead of a "on/off" binary
semaphore, an incrementing tag scheme is used to ACK interrupts.

All MSI supporting chips support TAGGED mode, so the tg3_msi()
interrupt handler uses it unconditionally.  This invariant is
verified when MSI support is tested.

Since we can invoke tg3_poll() multiple times per interrupt under
high packet load, we fetch a new copy of the tag value in the
status block right before we actually do the work.

Also, because the tagged status tells the chip exactly which
work we have processed, we can make two optimizations:

1) tg3_restart_ints() need not check tg3_has_work()
2) the tg3_timer() need not poke the chip 10 times per
   second to keep from losing interrupt events

Based upon valuable feedback from Michael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fac9b83e
    • L
      Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/ · 05d3794a
      由 Linus Torvalds 提交于
      05d3794a
    • S
      [PATCH] Avoid console spam with ext3 aborted journal. · 30121624
      由 Stephen Tweedie 提交于 
      Avoid console spam with ext3 aborted journal.

ext3 usually reports error conditions that it detects in its environment.
But when its journal gets aborted due to such errors, it can sometimes
continue to report that condition forever, spamming the console to such
an extent that the initial first cause of the journal abort can be lost.

When the journal aborts, we put the filesystem into readonly mode.  Most
subsequent filesystem operations will get rejected immediately by checks
for MS_RDONLY either in the filesystem or in the VFS.  But some paths do
not have such checks --- for example, if we continue to write to a file
handle that was opened before the fs went readonly.  (We only check for
the ROFS condition when the file is first opened.)  In these cases, we
can continue to generate log errors similar to

EXT3-fs error (device $DEV) in start_transaction: Journal has aborted

for each subsequent write.

There is really no point in generating these errors after the initial
error has been fully reported.  Specifically, if we're starting a
completely new filesystem operation, and the filesystem is *already*
readonly (ie. the ext3 layer has already detected and handled the
underlying jbd abort), and we see an EROFS error, then there is simply
no point in reporting it again.
Signed-off-by: NStephen Tweedie <sct@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      30121624
    • S
      [PATCH] Fix filp being passed through raw ioctl handler · e72022e1
      由 Stephen Tweedie 提交于 
      Don't pass meaningless file handles to block device ioctls.

The recent raw IO ioctl-passthrough fix started passing the raw file
handle into the block device ioctl handler.  That's unlikely to be
useful, as the file handle is actually open on a character-mode raw
device, not a block device, so dereferencing it is not going to yield
useful results to a block device ioctl handler.

Previously we just passed NULL; also not a value that can usefully
be dereferenced, but at least if it does happen, we'll oops instead of
silently pretending that the file is a block device, so NULL is the more
defensive option here.  This patch reverts to that behaviour.

Noticed by Al Viro.
Signed-off-by: NStephen Tweedie <sct@redhat.com>
Acked-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e72022e1
  5. 18 5月, 2005 11 次提交
  7. 17 5月, 2005 14 次提交