- 28 4月, 2018 1 次提交
-
-
由 David S. Miller 提交于
Make PHYLIB boolean, because we reference phylib provided symbols now from net/core/ethtool.c and therefore 'm' doesn't work. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2018 4 次提交
-
-
由 Florian Fainelli 提交于
We just return the same statistics through ethtool_get_stats() and ethtool_get_phy_stats() for simplicity since this is just a mock-up driver. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Allow the b53 driver to return PHY statistics when the CPU port used is different than 5, 7 or 8, because those are typically PHY-less on most devices. This is useful for debugging link problems between the switch and an external host when using a non standard CPU port number (e.g: 4). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Up until now we largely assumed that we were interested in ETH_SS_STATS type of strings for all ethtool operations, this is about to change with the introduction of additional string sets, e.g: ETH_SS_PHY_STATS. Update all functions to take an appropriate stringset argument and act on it when it is different than ETH_SS_STATS for now. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In order to make it possible for network device drivers that do not necessarily have a phy_device attached, but still report PHY statistics, have a preliminary refactoring consisting in creating helper functions that encapsulate the PHY device driver knowledge within PHYLIB. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2018 17 次提交
-
-
由 Colin Ian King 提交于
The check for len > 0 is always true and hence is redundant as this check is already being made to execute the code inside the while-loop. Hence it is redundant and can be removed. Cleans up cppcheck warning: drivers/net/hamradio/mkiss.c:220: (warning) Identical inner 'if' condition is always true. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
There are two identical nested if statements, the second is redundant and can be removed. Also clean up white space formatting. Cleans up cppcheck warning: drivers/net/ethernet/amd/amd8111e.c:1080: (warning) Identical inner 'if' condition is always true. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vinicius Costa Gomes 提交于
This allows filters added by tc-flower and specifying MAC addresses, Ethernet types, and the VLAN priority field, to be offloaded to the controller. This reuses most of the infrastructure used by ethtool, but clsflower filters are kept in a separated list, so they are invisible to ethtool. To setup clsflower offloading: $ tc qdisc replace dev eth0 handle 100: parent root mqprio \ num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 hw 0 (clsflower offloading depends on the netword driver to be configured with multiple traffic classes, we use mqprio's 'num_tc' parameter to set it to 3) $ tc qdisc add dev eth0 ingress Examples of filters: $ tc filter add dev eth0 parent ffff: flower \ dst_mac aa:aa:aa:aa:aa:aa \ hw_tc 2 skip_sw (just a simple filter filtering for the destination MAC address and steering that traffic to queue 2) $ tc filter add dev enp2s0 parent ffff: proto 0x22f0 flower \ src_mac cc:cc:cc:cc:cc:cc \ hw_tc 1 skip_sw (as the i210 doesn't support steering traffic based on the source address alone, we need to use another steering traffic, in this case we are using the ethernet type (0x22f0) to steer traffic to queue 1) Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 John Hurley 提交于
If a flower rule has a repr both as ingress and egress port then 2 callbacks may be generated for the same rule request. Add an indicator to each flow as to whether or not it was added from an ingress registered cb. If so then ignore add/del/stat requests to it from an egress cb. Signed-off-by: NJohn Hurley <john.hurley@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Hurley 提交于
When multiple netdevs are attached to a tc offload block and register for callbacks, a rule added to the block will be propogated to all netdevs. Previously these were detected as duplicates (based on cookie) and rejected. Modify the rule nfp lookup function to optionally include an ingress netdev and a host context along with the cookie value when searching for a rule. When a new rule is passed to the driver, the netdev the rule is to be attached to is considered when searching for dublicates. When a stats update is received from HW, the host context is used alongside the cookie to map to the correct host rule. Signed-off-by: NJohn Hurley <john.hurley@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
To aid debugging of performance issues caused by limited PCIe bandwidth print the PCIe link information on probe. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
NFP locks record the owner when held, for PCIe devices the owner ID will be the PCIe link number. When driver loads it should scan known locks and if they indicate that they are held by local endpoint but the driver doesn't hold them - release them. Locks can be left taken for instance when kernel gets kexec-ed or after a crash. Management FW tries to clean up stale locks too, but it currently depends on PCIe link going down which doesn't always happen. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vinicius Costa Gomes 提交于
This adds basic functions needed to implement offloading for filters created by tc-flower. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
This adds the capability of configuring the queue steering of arriving packets based on their source and destination MAC addresses. Source address steering (i.e. driving traffic to a specific queue), for the i210, does not work, but filtering does (i.e. accepting traffic based on the source address). So, trying to add a filter specifying only a source address will be an error. In practical terms this adds support for the following use cases, characterized by these examples: $ ethtool -N eth0 flow-type ether dst aa:aa:aa:aa:aa:aa action 0 (this will direct packets with destination address "aa:aa:aa:aa:aa:aa" to the RX queue 0) $ ethtool -N eth0 flow-type ether src 44:44:44:44:44:44 \ proto 0x22f0 action 3 (this will direct packets with source address "44:44:44:44:44:44" and ethertype 0x22f0 to the RX queue 3) Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
This allows igb_add_filter()/igb_erase_filter() to work on filters that include MAC addresses (both source and destination). For now, this only exposes the functionality, the next commit glues ethtool into this. Later in this series, these APIs are used to allow offloading of cls_flower filters. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
Users expect that when adding a steering filter for the local MAC address, that all the traffic directed to that address will go to some queue. Currently, it's not possible to configure entries in the "in use" state, which is the normal state of the local MAC address entry (it is the default), this patch allows to override the steering configuration of "in use" entries, if the filter to be added match the address and address type (source or destination) of an existing entry. There is a bit of a special handling for entries referring to the local MAC address, when they are removed, only the steering configuration is reset. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
On some igb models (82575 and i210) the MAC address filters can control to which queue the packet will be assigned. This extends the 'state' with one more state to signify that queue selection should be enabled for that filter. As 82575 parts are no longer easily obtained (and this was developed against i210), only support for the i210 model is enabled. These functions are exported and will be used in the next patch. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
Makes it possible to direct packets to queues based on their source address. Documents the expected usage of the 'flags' parameter. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
This will allow functionality depending on the hardware being traffic class aware to work. In particular the tc-flower offloading checks verifies that this bit is set. Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vinicius Costa Gomes 提交于
On the RAH registers there are semantic differences on the meaning of the "queue" parameter for traffic steering depending on the controller model: there is the 82575 meaning, which "queue" means a RX Hardware Queue, and the i350 meaning, where it is a reception pool. The previous behaviour was having no effect for i210 based controllers because the QSEL bit of the RAH register wasn't being set. This patch separates the condition in discrete cases, so the different handling is clearer. Fixes: 83c21335 ("igb: improve MAC filter handling") Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexandre Belloni 提交于
Some MDIO busses will error out when trying to read a phy address with no phy present at that address. In that case, probing the bus will fail because __mdiobus_register() is scanning the bus for all possible phys addresses. In case MII_PHYSID1 returns -EIO or -ENODEV, consider there is no phy at this address and set the phy ID to 0xffffffff which is then properly handled in get_phy_device(). Suggested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vinicius Costa Gomes 提交于
Because the order of the parameters passes to 'hlist_add_behind()' was inverted, the 'parent' node was added "behind" the 'input', as input is not in the list, this causes the 'input' node to be lost. Fixes: 0e71def2 ("igb: add support of RX network flow classification") Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 25 4月, 2018 17 次提交
-
-
由 Alexander Duyck 提交于
The original implementation for macvlan offload has us performing a full port reset every time we added a new macvlan. This shouldn't be necessary and can be avoided with a few behavior changes. This patches updates the logic for the queues so that we have essentially 3 possible configurations for macvlan offload. They consist of 15 macvlans with 4 queues per macvlan, 31 macvlans with 2 queues per macvlan, and 63 macvlans with 1 queue per macvlan. As macvlans are added you will encounter up to 3 total resets if you add all the way up to 63, and after that the device will stay in the mode supporting up to 63 macvlans until the L2FW flag is cleared. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch drops the real_adapter member from the fwd_adapter structure. The general idea behind the change is that the real_adapter is carrying unnecessary data since we could always just grab the adapter structure from netdev_priv(macvlan->lowerdev) if we really needed to get at it. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Both the ixgbe and fm10k drivers support destination filtering. Instead of adding a ton of complexity to support either source or passthru mode we can instead just avoid offloading them for now. Doing this we avoid leaking packets into interfaces that aren't meant to receive them. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Drop dead code now that we shouldn't be receiving broadcast or multicast frames on the queues associated to the macvlan netdev. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that we use a software path for packets that are going to be locally switched between two macvlan interfaces on the same device. In addition we resort to software replication of broadcast and multicast packets instead of offloading that to hardware. The general idea is that using the device for east/west traffic local to the system is extremely inefficient. We can only support up to whatever the PCIe limit is for any given device so this caps us at somewhere around 20G for devices supported by ixgbe. This is compounded even further when you take broadcast and multicast into account as a single 10G port can come to a crawl as a packet is replicated up to 60+ times in some cases. In order to get away from that I am implementing changes so that we handle broadcast/multicast replication and east/west local traffic all in software. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change renames the fwd_priv member to accel_priv as this more accurately reflects the actual purpose of this value. In addition I am adding an accessor which will allow us to further abstract this in the future if needed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Drop the code for handling macvlan specific unicast lists. It isn't needed since we don't take any efforts to maintain it when we bring the interface up and it takes the slow path anyway. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jakub Kicinski 提交于
Comparison instruction requires a subtraction. If the constant is negative we are more likely to fit it into a NFP instruction directly if we change the sign and use addition. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
There are quite a few compare instructions now, use a table to translate BPF instruction code to NFP instruction parameters instead of parameterizing helpers. This saves LOC and makes future extensions easier. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
NFP instruction set can fit small immediates into the instruction. Negative integers, however, will never fit because they will have highest bit set. If we swap the ALU op between ADD and SUB and negate the constant we have a better chance of fitting small negative integers into the instruction itself and saving one or two cycles. immed[gprB_21, 0xfffffffc] alu[gprA_4, gprA_4, +, gprB_21], gpr_wrboth immed[gprB_21, 0xffffffff] alu[gprA_5, gprA_5, +carry, gprB_21], gpr_wrboth now becomes: alu[gprA_4, gprA_4, -, 4], gpr_wrboth alu[gprA_5, gprA_5, -carry, 0], gpr_wrboth Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
Whitespace cleanup - remove double space. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Srinivas Jampala 提交于
Swap VF representor tx and rx interface statistics since it is a virtual switchdev port and tx for VM should be rx for VF representor and vice-versa. Signed-off-by: NSrinivas Jampala <srinivasa.jampala@cavium.com> Acked-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The check port->rev_info.major >= 6 is being performed twice, thus the inner second check is always true and is redundant, hence it can be removed. Detected by cppcheck. drivers/net/ethernet/freescale/fman/fman_port.c:1394]: (warning) Identical inner 'if' condition is always true. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Md Fahad Iqbal Polash 提交于
For the MAC read operation, the device can return up to two (LAN and WoL) MAC addresses. Without access to adequate memory, the device will return an error. Fixed this by allocating the right amount of memory. Also, logic to detect and copy the LAN MAC address into the port_info structure has been added. Note that the WoL MAC address is ignored currently as the WoL feature isn't supported yet. Fixes: dc49c772 ("ice: Get MAC/PHY/link info and scheduler topology") Signed-off-by: NMd Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NTony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Denis Bolotin 提交于
The strscpy() was a recent fix (net: qed: use correct strncpy() size) to prevent passing the length of the source buffer to strncpy() and guarantee null termination. It misses the goal of overwriting only the first 3 characters in "???_BIG_RAM" and "???_RAM" while keeping the rest of the string. Use strncpy() with the length of 3, without null termination. Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Cree 提交于
Associate an arbitrary ID with each ARFS filter, allowing to properly query for expiry. The association is maintained in a hash table, which is protected by a spinlock. v3: fix build warnings when CONFIG_RFS_ACCEL is disabled (thanks lkp-robot). v2: fixed uninitialised variable (thanks davem and lkp-robot). Fixes: 3af0f342 ("sfc: replace asynchronous filter operations") Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Shelton 提交于
According to the hardware spec, checking the INTEVENT bit isn't a reliable way to detect if an OICR interrupt has occurred. This is because this bit can be cleared by the hardware/firmware before the interrupt service routine has run. So instead, just check for OICR events every time. Fixes: 940b61af ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: NBen Shelton <benjamin.h.shelton@intel.com> Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NTony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 4月, 2018 1 次提交
-
-
由 Anirudh Venkataramanan 提交于
Action type 5 defines large action generic values. Fix comment to reflect that better. Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: NTony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-