- remove deprecated stih416 chip functionnalities
- fix issues met around gdp panes
- fix STI driver unbind procedure
- DVI/HDMI mode is automatically detected
- allow fps statisitics resetting

* tag 'sti-drm-next-2017-02-10' of https://github.com/vinceab/linux:
  drm/sti: debug fps reset
  drm/sti: hdmi: automatically check DVI/HDMI mode
  drm/sti: unbind all components while driver cleanup
  drm/sti: do not post GDP command if no update
  drm/sti: do not set gdp pixel clock rate if mode is not set
  drm/sti: enable gdp pixel clock in atomic_update
  drm/sti: remove deprecated legacy vtg slave
  drm/sti: remove deprecated sink_term config
  drm/sti: do not check hw scaling if mode is not set
  drm/sti: Fix up crtc_state->event handling
  drm/sti: use atomic_helper for commit

Reset the fps debug information when 'fps_show' is updated.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>

Remove the hdmi_mode_property and use drm_detect_hdmi_monitor function
to check whether the connected monitor is HDMI capable or DVI only.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Unbind all the components when the STI driver is unregistered.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Do not process update requests with unmodified parameters.

This typically happens when the driver is called with legacy
(non-atomic) IOCTL : in that case atomic_update() is called multiple
times with the same parameters.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Fix a division by 0 case : in some cases, when the GDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not set parent and pixel clock rate.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Set gdp pix clock rate and parent in atomic_check function and enable
it in the atomic_update only the first time.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

stih416 chip family is no more supported in Linux v4.9.
It is then useless to keep vtg slave field since it not used at all for
the stih407/10 chip family supported by sti driver.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

stih416 chip family is no more supported in Linux v4.9.
Then sink_term config becomes useless. The field of the
register it was referring to is tag as reserved for stih410
chip family.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>

Fix a division by 0 case : in some cases, when the HQVDP plane is being
disabled atomic_check() is called with "mode->clock = 0".
In that case, do not check for scaling capabilities.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

Use drm-core to handle event.
This is required to be able to use the nonblocking helpers.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

Since nonblocking atomic commits are now supported, the driver can
now use drm_atomic_helper_commit().
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Acked-by: NVincent Abriou <vincent.abriou@st.com>

Some additional fixes for 4.11.  Delayed a bit due to Chinese New Year. Highlights:
- Powerplay fixes
- VCE and UVD powergating fixes
- Clean up amdgpu SI gfx code to match CI and VI
- Misc bug fixes

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
  drm/amdgpu: report the number of bytes moved at buffer creation
  drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()
  drm/amdgpu: add support for new smc firmware on polaris
  drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared.
  drm/amdgpu: shut up #warning for compile testing
  drm/amdgpu/virt: fix double kfree on bo_va
  drm/radeon: remove some dead code
  drm/radeon: avoid kernel segfault in vce when gpu fails to resume
  drm/amd/powerplay: set fan speed to max in profile peak mode only.
  drm/amd/gfx6: update gb_addr_config
  drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN
  drm/amdgpu: refine si_read_register
  drm/amdgpu/gfx6: clean up spi configuration
  drm/amdgpu/gfx6: clean up cu configuration
  drm/amdgpu/gfx6: clean up rb configuration
  drm/amdgpu: refine vce3.0 code and related powerplay pg code.
  drm/amdgpu: move subfunctions to the front of vce_v2_0.c.
  drm/amdgpu: enable vce pg feature on Kv.
  drm/amdgpu: refine code for VCE2.0 and related dpm code.
  ...

two minor fixes.

* tag 'drm-fsl-dcu-for-v4.11' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: check for clk_prepare_enable() error
  drm/fsl-dcu: remove unneeded 'ret' assignment

Merge tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Just 3 bugfixes for 4.11 merge window:

- fbdev module unload oops fix from Chris
- patch from Dan that look really dangers, better safe than sorry

* tag 'drm-misc-next-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
  drm/atomic: fix an error code in mode_fixup()
  drm: Cancel drm_fb_helper_resume_work on unload
  drm: Cancel drm_fb_helper_dirty_work on unload

Like ttm_bo_validate(), ttm_bo_init() might need to move BO and
the number of bytes moved by TTM should be reported. This can help
the throttle buffer migration mechanism to make a better decision.

v2: fix computation
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When ttm_bo_init() fails, the reservation mutex should be unlocked.

In debug build, the kernel reported "possible recursive locking
detected" in this codepath. For debugging purposes, I also added
a "WARN_ON(ww_mutex_is_locked())" when ttm_bo_init() fails and the
mutex was locked as expected.

This should fix (random) GPU hangs. The easy way to reproduce the
issue is to change the "Super Sampling" option from 1.0 to 2.0 in
Hitman. It will create a huge buffer, evict a bunch of buffers
(around ~5k) and deadlock.

This regression has been introduced pretty recently.

v2: only release the mutex if resv is NULL

Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSamuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some polaris variants require new smc firmware.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

My randconfig tests on linux-next showed a newly introduced warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function 'amdgpu_bo_create_restricted':
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:377:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]

Generally speaking, warnings about bad kernel configuration are not particularly
helpful. We could enforce the selection of X86_PAT through Kconfig, so the driver
cannot even be used unless it is enabled, or we could just rely on the runtime
warning that is also there.

In this version, I'm making the warning conditional on CONFIG_COMPILE_TEST, which
shuts it up for me, but not people that may actually want to run the kernel
as a compromize.

Fixes: a2e2f299 ("drm/amdgpu: Bring bo creation in line with radeon driver (v2)")
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv
and then a short while later. Fix this double free by removing
the 2nd kfree.

Detected by CoverityScan, CID#1399524 ("Double Free")
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If "rdev->bios" is NULL then we don't need to free it.
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When GPU fails to resume we can not trust that value we write to GPU
memory will post and we might get garbage (more like 0xffffffff on
x86) when reading them back. This trigger out of range memory access
in the kernel inside the vce resume code path.

This patch use canonical value to compute offset instead of reading
back value from GPU memory.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. not start vce3.0 when hw_init
2. stop vce3.0 when vce idle.
3. pg mask used to ctrl power down/up vce.
4. change cg pg sequence in powerplay.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: clean up vce cg function.
    use sw cg when vce stoped.

1. implement vce_stop function.
2. not start vce when hw_init.
3. refine vce cg/pg code.
4. delete bypass mode.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. delete redundant cg pg mask check.
   pg mask use to ctrl power on/down uvd.
   not start/stop uvd.
   cg mask will be check when enable mgcg.
2. no need to start uvd when initializ.
   when ring test/ib test/encode, uvd was enabled.
   when uvd idle, uvd was stopped.
3. chang cg pg sequence in powerplay.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

need to start smc when dpm disabled.
otherwise, uvd can't get response from smu.
so uvd ring test and ib test will timeout.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. set uvd_status busy before uvd_start.
2. clear uvd_status to 0 after uvd stop.
   smu firmware may check uvd_status.
3. wait uvd idle before stop uvd.
4. not start uvd when hw_init.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. no need to set cg as use hw dynamic cg.
2. when uvd idle, stop uvd. encode, start uvd.
3. if pg feature enabled, power on/down uvd by smu.
4. drm/amdgpu: dpm do not set uvd pg status.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>