The Notes section of the comment was removed, because now
blk_release_queue can only be executed from blk_cleanup_queue (being
called when the q->kobj reaches zero), and also blk_init_queue was removed
in a1ce35fa.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since 4cf6324b, a portion of function blk_cleanup_queue was moved to
a newly created function called blk_exit_queue, including the call of
blkcg_exit_queue. So, adjust the documenation according.
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We have various helpers for setting/clearing this flag, and also
a helper to check if the queue supports queueable flushes or not.
But nobody uses them anymore, kill it with fire.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's no reason to freeze queue and set nr_requests value
if current value is the same.
Signed-off-by: NAleksei Zakharov <zakharov.a.g@yandex.ru>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, we check whether the hctx type is supported every time
in hot path. Actually, this is not necessary, we could save the
default hctx into ctx->hctxs if the type is not supported when
map swqueues and use it directly with ctx->hctxs[type].

We also needn't check whether the poll is enabled or not, because
the caller would clear the REQ_HIPRI in that case.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, the queue mapping result is saved in a two-dimensional
array. In the hot path, to get a hctx, we need do following:

  q->queue_hw_ctx[q->tag_set->map[type].mq_map[cpu]]

This isn't very efficient. We could save the queue mapping result into
ctx directly with different hctx type, like,

  ctx->hctxs[type]
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When a new I/O request arrives for a bfq_queue, say Q, bfq checks
whether that request is close to
(a) the head request of some other queue waiting to be served, or
(b) the last request dispatched for the in-service queue (in case Q
itself is not the in-service queue)

If a queue, say Q2, is found for which the above condition holds, then
bfq merges Q and Q2, to hopefully get a more sequential I/O in the
resulting merged queue, and thus a possibly higher throughput.

Case (b) is checked by comparing the new request for Q with the last
request dispatched, assuming that the latter necessarily belonged to the
in-service queue. Unfortunately, this assumption is no longer always
correct, since commit d0edc247 ("block, bfq: inject other-queue I/O
into seeky idle queues on NCQ flash").

When the assumption does not hold, queues that must not be merged may be
merged, causing unexpected loss of control on per-queue service
guarantees.

This commit solves this problem by adding an extra field, which stores
the actual last request dispatched for the in-service queue, and by
using this new field to correctly check case (b).
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Writes tend to starve reads. bfq counters this problem by overcharging
writes with an inflated service w.r.t. the actual service (number of
sector written) they receive.

Yet his overcharging is useless, and actually causes unfairness in the
opposite direction, when bfq happens to be enforcing strong I/O control.
bfq does this enforcing when the scenario is asymmetric, i.e., when some
bfq_queue or group of bfq_queues is to be granted a different bandwidth
than some other bfq_queue or group of bfq_queues. So, in such a
scenario, this commit disables write overcharging.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The original commit is commit 1a1238a7 ("cfq-iosched: improve hw_tag
detection") and has the following commit message:

If active queue hasn't enough requests and idle window opens, cfq will
not dispatch sufficient requests to hardware. In such situation, current
code will zero hw_tag. But this is because cfq doesn't dispatch enough
requests instead of hardware queue doesn't work. Don't zero hw_tag in
such case.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bfq simple heuristic from cfq for detecting whether the drive performs
command queueing: check whether the average number of in-flight requests
is above a given threshold. Unfortunately this heuristic does fail to
detect queueing (on drives with queueing) if processes doing I/O are few
and issue I/O with a low depth.

To reduce false negatives, this commit lowers the threshold.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bfq maintains an ordered list, through a red-black tree, of unique
weights of active bfq_queues. This list is used to detect whether there
are active queues with differentiated weights. The weight of a queue is
removed from the list when both the following two conditions become
true:

(1) the bfq_queue is flagged as inactive
(2) the has no in-flight request any longer;

Unfortunately, in the rare cases where condition (2) becomes true before
condition (1), the removal fails, because the function to remove the
weight of the queue (bfq_weights_tree_remove) is rightly invoked in the
path that deactivates the bfq_queue, but mistakenly invoked *before* the
function that actually performs the deactivation (bfq_deactivate_bfqq).

This commits moves the invocation of bfq_weights_tree_remove for
condition (1) to after bfq_deactivate_bfqq. As a consequence of this
move, it is necessary to add a further reference to the queue when the
weight of a queue is added, because the queue might otherwise be freed
before bfq_weights_tree_remove is invoked. This commit adds this
reference and makes all related modifications.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In bfq_update_peak_rate, to check whether an I/O request rq is
sequential, only the seek distance of rq w.r.t. the last request
dispatched is controlled. This is not sufficient for non-rotational
storage, where the size of rq is at least as relevant. This commit adds
the missing control.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bfq detects the creation of multiple bfq_queues shortly after each
other, namely a burst of queue creations in the terminology used in the
code. If the burst is large, then no queue in the burst is granted
- either I/O-dispatch plugging when the queue remains temporarily idle
  while in service;
- or weight raising, because it causes even longer plugging.

In fact, such a plugging tends to lower throughput, while these bursts
are typically due to applications or services that spawn multiple
processes, to reach a common goal as soon as possible. Examples are a
"git grep" or the booting of a system.

Unfortunately, disabling plugging may cause a loss of service guarantees
in asymmetric scenarios, i.e., if queue weights are differentiated or if
more than one group is active.

This commit addresses this issue by no longer disabling I/O-dispatch
plugging for queues in large bursts.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the in-service bfq_queue is sync and remains temporarily idle, then
I/O dispatching (from other queues) may be plugged. It may be dome for
two reasons: either to boost throughput, or to preserve the bandwidth
share of the in-service queue. In the first case, if the I/O of the
in-service queue, when it finally arrives, consists only of one small
I/O request, then it makes sense to plug even the I/O of the in-service
queue. In fact, serving such a small request immediately is likely to
lower throughput instead of boosting it, whereas waiting a little bit is
likely to let that request grow, thanks to request merging, and become
more profitable in terms of throughput (this is likely to happen exactly
because the I/O of the queue has been detected to boost throughput).

On the opposite end, if I/O dispatching is being plugged only to
preserve the bandwidth of the in-service queue, then it would be better
not to plug also the I/O of the in-service queue, because such a
plugging is likely to cause only loss of bandwidth for the queue.

Unfortunately, no distinction is made between the two cases, and the I/O
of the in-service queue is always plugged in case just a small I/O
request arrives. This commit draws this missing distinction and does not
perform harmful plugging.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is a preparatory commit for commits that need to check only one of
the two main reasons for idling. This change should also improve the
quality of the code a little bit, by splitting a function that contains
very long, non-trivial and little related comments.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In asymmetric scenarios, i.e., when some bfq_queue or bfq_group needs to
be guaranteed a different bandwidth than other bfq_queues or bfq_groups,
these service guaranteed can be provided only by plugging I/O dispatch,
completely or partially, when the queue in service remains temporarily
empty. A case where asymmetry is particularly strong is when some active
bfq_queues belong to a higher-priority class than some other active
bfq_queues. Unfortunately, this important case is not considered at all
in the code for detecting asymmetric scenarios. This commit adds the
missing logic.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Before commit 18e5a57d ("block, bfq: postpone rq preparation to
insert or merge"), the destination queue for a request was chosen by a
different hook than the one that then inserted the request. So, between
the execution of the two hooks, the bic of the process generating the
request could happen to be redirected to a different bfq_queue. As a
consequence, the destination bfq_queue stored in the request could be
wrong. Such an event does not need to ba handled any longer.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With some unlucky sequences of events, the function bfq_updated_next_req
updates the current budget of a bfq_queue to a lower value than the
service received by the queue using such a budget. Unfortunately, if
this happens, then the return value of the function bfq_bfqq_budget_left
becomes inconsistent. This commit solves this problem by lower-bounding
the budget computed in bfq_updated_next_req to the service currently
charged to the queue.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To boost throughput on devices with internal queueing and in scenarios
where device idling is not strictly needed, bfq immediately starts
serving a new bfq_queue if the in-service bfq_queue remains without
pending I/O, even if new I/O may arrive soon for the latter queue. Then,
if such I/O actually arrives soon, bfq preempts the new in-service
bfq_queue so as to give the previous queue a chance to go on being
served (in case the previous queue should actually be the one to be
served, according to its timestamps).

However, the in-service bfq_queue, say Q, may also be without further
budget when it remains also pending I/O. Since bfq changes budgets
dynamically to fit the needs of bfq_queues, this happens more often than
one may expect. If this happens, then there is no point in trying to go
on serving Q when new I/O arrives for it soon: Q would be expired
immediately after being selected for service. This would only cause
useless overhead. This commit avoids such a useless selection.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The speed at which a bfq_queue receives I/O is one of the parameters by
which bfq decides whether the queue is soft real-time (i.e., whether the
queue contains the I/O of a soft real-time application). In particular,
when a bfq_queue remains without outstanding I/O requests, bfq computes
the minimum time instant, named soft_rt_next_start, at which the next
request of the queue may arrive for the queue to be deemed as soft real
time.

Unfortunately this filtering may cause problems with a queue in
interactive weight raising. In fact, such a queue may be conveying the
I/O needed to load a soft real-time application. The latter will
actually exhibit a soft real-time I/O pattern after it finally starts
doing its job. But, if soft_rt_next_start is updated for an interactive
bfq_queue, and the queue has received a lot of service before remaining
with no outstanding request (likely to happen on a fast device), then
soft_rt_next_start is assigned such a high value that, for a very long
time, the queue is prevented from being possibly considered as soft real
time.

This commit removes the updating of soft_rt_next_start for bfq_queues in
interactive weight raising.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.

This reverts commit 698cef17.

Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch avoids that sparse reports the following warnings:

  CHECK   block/blk-wbt.c
block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static?
block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static?
  CC      block/blk-wbt.o
block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes]
 void wbt_issue(struct rq_qos *rqos, struct request *rq)
      ^~~~~~~~~
block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes]
 void wbt_requeue(struct rq_qos *rqos, struct request *rq)
      ^~~~~~~~~~~
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Swap REQ_NOWAIT and REQ_NOUNMAP and add REQ_HIPRI.
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Except for blk_queue_split(), bio_split() is used for splitting bio too,
then the remained bio is often resubmit to queue via generic_make_request().
So the same queue enter recursion exits in this case too. Unfortunatley
commit cd4a4ae4 doesn't help this case.

This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
q->make_request_fn.

In theory the per-bio flag is used to simulate one stack variable, it is
just fine to clear it after q->make_request_fn is returned. Especially
the same bio can't be submitted from another context.

Fixes: cd4a4ae4 ("block: don't use blocking queue entered for recursive bio submits")
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: NeilBrown <neilb@suse.com>
Reviewed-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove the imprecise and sloppy:

  "This files is licensed under the GPL."

license notice in the top level comment.

1) The file already contains a SPDX license identifier which clearly
   states that the license of the file is GPL V2 only

2) The notice resolves to GPL v1 or later for scanners which is just
   contrary to the intent of SPDX identifiers to provide clear and non
   ambiguous license information. Aside of that the value add of this
   notice is below zero,

Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Fixes: 6a5ac984 ("block: Make struct request_queue smaller for CONFIG_BLK_DEV_ZONED=n")
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We need to pass bio->bi_opf after bio intergrity preparing, otherwise
the flag of REQ_INTEGRITY may not be set on the allocated request, then
breaks block integrity.

Fixes: f9afca4d ("blk-mq: pass in request/bio flags to queue mapping")
Cc: Hannes Reinecke <hare@suse.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Comments on function __bfq_deactivate_entity contains two imprecise or
wrong statements:
1) The function performs the deactivation of the entity.
2) The function must be invoked only if the entity is on a service tree.

This commits replaces both statements with the correct ones:
1) The functions updates sched_data and service trees for the entity,
so as to represent entity as inactive (which is only part of the steps
needed for the deactivation of the entity).
2) The function must be invoked on every entity being deactivated.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Commit 5f0ed774 ("block: sum requests in the plug structure") removed
the request_count parameter from block_attempt_plug_merge(), but did not
remove the associated kerneldoc comment, introducing this warning to the
docs build:

  ./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge'

Remove the obsolete description and make things a little quieter.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There was some confusion about what these functions did.  Make it clear
that this is a hint for upper layers to pass to the block layer, and
that it does not guarantee that I/O will not be submitted between a
start and finish plug.
Reported-by: N"Darrick J. Wong" <darrick.wong@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Besides the OSD command set that never got traction, the only SCSI
command using bidirectional buffers is XDWRITEREAD in the 10 and 32 byte
variants, which is extremely esoteric and has been removed from the spec
again as of SBC4r15.  It probably doesn't make sense to keep the support
code around just for that, so start deprecating the support.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

An earlier commit 7fcf2b03 ("blkcg: change blkg reference counting
to use percpu_ref") moved around the release call from blkg_put() to be
a part of the percpu_ref cleanup. Remove the additional unused code
which should have been removed earlier.
Signed-off-by: NDennis Zhou <dennis@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The implementation of blkg_tryget_closest() wasn't super obvious and
became a point of suspicion when debugging [1]. So let's clean it up so
it's obviously not the problem.

Also add missing RCU read locking to bio_clone_blkg_association(), which
got exposed by adding the RCU read lock held check in
blkg_tryget_closest().

[1] https://lore.kernel.org/linux-block/a7e97e4b-0dd8-3a54-23b7-a0f27b17fde8@kernel.dk/Signed-off-by: NDennis Zhou <dennis@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.

I do not see a good reason to complicate Kconfig for the room of
ambiguity.

The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.

Make it treewide consistent now.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NIngo Molnar <mingo@kernel.org>

sbq_wake_ptr() checks sbq->ws_active to know if it needs to loop
the wait indexes or not. This requires the use of the sbitmap
waitqueue wrappers, but kyber doesn't use those for its domain
token waitqueue handling.

Convert kyber to use the helpers. This fixes a hang with waiting
for domain tokens.

Fixes: 5d2ee712 ("sbitmap: optimize wakeup check")
Tested-by: NMing Lei <ming.lei@redhat.com>
Reported-by: NMing Lei <ming.lei@redhat.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blkg_lookup_create() may be called from pool_map() in which
irq state is saved, so we have to do that in blkg_lookup_create().

Otherwise, the following lockdep warning can be triggered:

[  104.258537] ================================
[  104.259129] WARNING: inconsistent lock state
[  104.259725] 4.20.0-rc6+ #545 Not tainted
[  104.260268] --------------------------------
[  104.260865] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  104.261727] swapper/49/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
[  104.262444] 00000000db365b5d (&(&pool->lock)->rlock#3){+.?.}, at: thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.263747] {SOFTIRQ-ON-W} state was registered at:
[  104.264417]   _raw_spin_unlock_irq+0x29/0x4c
[  104.265014]   blkg_lookup_create+0xdc/0xe6
[  104.265609]   bio_associate_blkg_from_css+0xd3/0x13f
[  104.266312]   bio_associate_blkg+0x15a/0x1bb
[  104.266913]   pool_map+0xe8/0x103 [dm_thin_pool]
[  104.267572]   __map_bio+0x98/0x29c [dm_mod]
[  104.268162]   __split_and_process_non_flush+0x29e/0x306 [dm_mod]
[  104.269003]   __split_and_process_bio+0x16a/0x25b [dm_mod]
[  104.269971]   __dm_make_request.isra.14+0xdc/0x124 [dm_mod]
[  104.270973]   generic_make_request+0x3f5/0x68b
[  104.271676]   process_prepared_mapping+0x166/0x1ef [dm_thin_pool]
[  104.272531]   schedule_zero+0x239/0x273 [dm_thin_pool]
[  104.273245]   process_cell+0x60c/0x6f1 [dm_thin_pool]
[  104.273967]   do_worker+0x60c/0xca8 [dm_thin_pool]
[  104.274635]   process_one_work+0x4eb/0x834
[  104.275203]   worker_thread+0x318/0x484
[  104.275740]   kthread+0x1d1/0x1e1
[  104.276203]   ret_from_fork+0x3a/0x50
[  104.276714] irq event stamp: 170003
[  104.277201] hardirqs last  enabled at (170002): [<ffffffff81bcc33e>] _raw_spin_unlock_irqrestore+0x44/0x6b
[  104.278535] hardirqs last disabled at (170003): [<ffffffff81bcc1ad>] _raw_spin_lock_irqsave+0x20/0x55
[  104.280273] softirqs last  enabled at (169978): [<ffffffff810d13d4>] irq_enter+0x4c/0x73
[  104.281617] softirqs last disabled at (169979): [<ffffffff810d1479>] irq_exit+0x7e/0x11d
[  104.282744]
[  104.282744] other info that might help us debug this:
[  104.283640]  Possible unsafe locking scenario:
[  104.283640]
[  104.284452]        CPU0
[  104.284803]        ----
[  104.285150]   lock(&(&pool->lock)->rlock#3);
[  104.285762]   <Interrupt>
[  104.286130]     lock(&(&pool->lock)->rlock#3);
[  104.286750]
[  104.286750]  *** DEADLOCK ***
[  104.286750]
[  104.287564] no locks held by swapper/49/0.
[  104.288129]
[  104.288129] stack backtrace:
[  104.288738] CPU: 49 PID: 0 Comm: swapper/49 Not tainted 4.20.0-rc6+ #545
[  104.289700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[  104.290858] Call Trace:
[  104.291204]  <IRQ>
[  104.291502]  dump_stack+0x9a/0xe6
[  104.291968]  mark_lock+0x56c/0x7a6
[  104.292442]  ? check_usage_backwards+0x209/0x209
[  104.293086]  __lock_acquire+0x400/0x15bf
[  104.293662]  ? check_chain_key+0x150/0x1aa
[  104.294236]  lock_acquire+0x1a6/0x1e3
[  104.294768]  ? thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.295444]  ? _raw_spin_unlock_irqrestore+0x44/0x6b
[  104.296143]  ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[  104.297031]  _raw_spin_lock_irqsave+0x46/0x55
[  104.297659]  ? thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.298335]  thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.298997]  ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[  104.299886]  ? check_flags+0x20a/0x20a
[  104.300408]  ? lock_acquire+0x1a6/0x1e3
[  104.300954]  ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[  104.301865]  clone_endio+0x1bb/0x22d [dm_mod]
[  104.302491]  ? disable_write_zeroes+0x20/0x20 [dm_mod]
[  104.303200]  ? bio_disassociate_blkg+0xc6/0x15f
[  104.303836]  ? bio_endio+0x2b2/0x2da
[  104.304349]  clone_endio+0x1f3/0x22d [dm_mod]
[  104.304978]  ? disable_write_zeroes+0x20/0x20 [dm_mod]
[  104.305709]  ? bio_disassociate_blkg+0xc6/0x15f
[  104.306333]  ? bio_endio+0x2b2/0x2da
[  104.306853]  clone_endio+0x1f3/0x22d [dm_mod]
[  104.307476]  ? disable_write_zeroes+0x20/0x20 [dm_mod]
[  104.308185]  ? bio_disassociate_blkg+0xc6/0x15f
[  104.308817]  ? bio_endio+0x2b2/0x2da
[  104.309319]  blk_update_request+0x2de/0x4cc
[  104.309927]  blk_mq_end_request+0x2a/0x183
[  104.310498]  blk_done_softirq+0x16a/0x1a6
[  104.311051]  ? blk_softirq_cpu_dead+0xe2/0xe2
[  104.311653]  ? __lock_is_held+0x2a/0x87
[  104.312186]  __do_softirq+0x250/0x4e8
[  104.312705]  irq_exit+0x7e/0x11d
[  104.313157]  call_function_single_interrupt+0xf/0x20
[  104.313860]  </IRQ>
[  104.314163] RIP: 0010:native_safe_halt+0x2/0x3
[  104.314792] Code: 63 02 df f0 83 44 24 fc 00 48 89 df e8 cc 3f 7a ff 48 8b 03 a8 08 74 0b 65 81 25 9d 31 45 7e ff ff ff 7f 5b 5d 41 5c c3 fb f4 <c3> f4 c3 0f 1f 44 00 00 41 56 41 55 41 54 55 53 e8 a2 0d 5c ff e8
[  104.317339] RSP: 0018:ffff888106c9fdc0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04
[  104.318390] RAX: 1ffff11020d92100 RBX: 0000000000000000 RCX: ffffffff81159ac7
[  104.319366] RDX: 1ffffffff05d5e69 RSI: 0000000000000007 RDI: ffff888106c90d1c
[  104.320339] RBP: 0000000000000000 R08: dffffc0000000000 R09: 0000000000000001
[  104.321313] R10: ffffed1025d57ba0 R11: ffffed1025d57b9f R12: 1ffff11020d93fbf
[  104.322328] R13: 0000000000000031 R14: ffff888106c90040 R15: 0000000000000000
[  104.323307]  ? lockdep_hardirqs_on+0x26b/0x278
[  104.323927]  default_idle+0xd9/0x1a8
[  104.324427]  do_idle+0x162/0x2b2
[  104.324891]  ? arch_cpu_idle_exit+0x28/0x28
[  104.325467]  ? mark_held_locks+0x28/0x7f
[  104.326031]  ? _raw_spin_unlock_irqrestore+0x44/0x6b
[  104.326719]  cpu_startup_entry+0x1d/0x1f
[  104.327261]  start_secondary+0x2cb/0x308
[  104.327806]  ? set_cpu_sibling_map+0x8a3/0x8a3
[  104.328421]  secondary_startup_64+0xa4/0xb0

Fixes: b978962a ("blkcg: update blkg_lookup_create() to do locking")
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that the the SCSI layer replaced the use of the cluster flag with
segment size limits and the DMA boundary we can remove the cluster flag
from the block layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

block consumers will need it for polling requests that
are sent with blk_execute_rq_nowait. Also, get rid of
blk_tag_to_qc_t and open-code it instead.
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The queue mapping of type poll only exists when set->map[HCTX_TYPE_POLL].nr_queues
is bigger than zero, so enhance the constraint by checking .nr_queues of type poll
before enabling IO poll.

Otherwise IO race & timeout can be observed when running block/007.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's a single user of this function, dm, and dm just wants
to check if IO is inflight, not that it's just allocated.

This fixes a hang with srp/002 in blktests with dm, where it tries
to suspend but waits for inflight IO to finish first. As it checks
for just allocated requests, this fails.
Tested-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

From 7e849dd9 ("nvme-pci: don't share queue maps"), the mapping
table won't be initialized actually if map->nr_queues is zero, so
we can't use blk_mq_map_queue_type() to retrieve hctx any more.

This way still may cause broken mapping, fix it by skipping zero-queues
maps in blk_mq_map_swqueue().

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>