Driver is able to load soft pptable from smc bin file with this function. We
stored the soft pptable in the bottom of smc.bin that the version is v2.

v2: remove is_fw_v2_0 flag.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add pm_enabled to control the dpm off/on.
v2: Directly return 0 to replace return ret and merge some check code.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHawking Zhang <hawking.zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Request too frequently may get corrupt data.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Support ppfeatures sysfs interface on Vega20 sw smu routine.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add this helper function to get smc version.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

XGMI pstate is controlled by SMU, driver need this interface to communicate
with SMU
Signed-off-by: Nshaoyunl <shaoyun.liu@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

use smu_update_table_with_arg to replace old code logic
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in fact, the firmware need 2 parameter: 1.table_id, 2.XferArg
so change the function interface to match the firmware code
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

each asic may be has different smc if version,
so move its to asic file to implement.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add condition to judge whether overdrive is enabled and correct power
limit value for overdrive used by power limit interface.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move pp_feature from the struct of amd_powerplay to amdgpu_device.
Add pp_feature limit for overdrive interface.

v2: put pp_feature into struct amdgpu_pm.
v3: merge feature_mask with pp_feature.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Suggested-by: NAlex Deucher <alexander.deucher@amd.com>
Suggested-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add sys interface to set socclk, fclk and dcefclk for smu.
Add feature_mask parameter for smu_upload_dpm_level as socclk, fclk and
dcefclk have dependency, without feature_mask to point out specific clk
will make it fail to set some clk.
Fix the function of smu_unforce_dpm_levels.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NGui Chengming <Jack.Gui@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Smc table hw init should be skipped for suspend/resume when dpm running.
Unified feature enable and disable function into smu_system_features_control.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Functional the function of smu suspend and resume.
Modified the function of smu_smc_table_hw_init to make it useful for smu
resume.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add is_dpm_running function to support smu s3 case.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Get eclk, vclk and dclk info from vbios when hw init for smu11.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add fan1_target set interface to set fan speed for hwmon.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1, set get_pwm1_enable and set_pwm1_enable functions to call
smu_get_fan_control_mode and smu_set_fan_control_mode for SMU11
2, implement set_fan_control_mode function

v2: add return value in set_fan_control_mode function
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

added main functions:
	get_fan_speed_percent
	set_fan_speed_percent.
added dependent functions:
	smc_fan_control
	set_fan_static_mode
	get_fan_speed_percent

v2: fix coding style issue
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add get_power_limit and set_power_limit functions
to support hwmon for SMU11.

v2: fix the code style issue.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add fan1_input and fan1_target interface to get fan speed info for hwmon.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add function to get sclk and mclk for smu11.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Unify power stade adjust function into smu_handle_task by the judgment
of task_id.
Move functions which have no relationship with smu version into the file
of amdgpu_smu.
Modified the function of smu_display_config_changed into two part.
Unify some similiar function.

v2: Correct the operation of upload dpm level when force dpm limit value.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add function of dpm enable uvd & vce for extern module use.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add dpm enable functions for vce,uvd.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

change:
1.when enable smu feature, the feature id will store sw-bitmap and smu
controller.
2.add feature mutex lock to protect feature bitmap changed when update
feature enabled state.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add sys interface to set pp_od_clk_voltage for smu.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add sys interface for set pp_sclk_od and pp_mclk_od for smu.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add function of smu_update_specified_od8_value to modify specified
overdrive value.
Add fucntion of smu_update_od8_settings to update overdrive table.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add get_performance_level and force_performance_level
to implement the sys interface for SMU11.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add enable_umd_pstate to support sys interface for SMU11.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add mclk_latency_table struct and smu_clocks structi
to support sys interface for SMU11.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add display_config to support sys interface for SMU11.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add set/get power profile mode functions.
	Added dependency interfaces:
		1) vega20_set_activity_monitor_coeff
		2) vega20_get_activity_monitor_coeff
		3) conv_power_profile_to_pplib_workload
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add functions to get/set dpm state for SMU11.
Signed-off-by: NChengming Gui <Jack.Gui@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NKevin Wang <kevin.wang@amd.com>
Reviewd-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add function to get sclk or mclk overdrive percentage information for smu11.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Backup default DPM table into golden dpm table.

v2: fix dpm_context and golden_dpm_context kfree two times issue.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add function of vega20_set_default_od8_setttings for vega20 with smu11
arch to setup default overdrive value.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add vega20_setup_od8_information function to store overdrive information
from powerplay_table to smu_table which will used when setting od8.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch implements inteferface to set watermarks table for clock ranges on
smu 11. It fills watermark table before it is written to SMC.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKevin Wang <Kevin1.Wang@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>