- 12 11月, 2005 17 次提交
-
-
由 Vladislav Yasevich 提交于
The socket level timeout values are maintained in sctp_sock and association level timeouts are in sctp_association. So there is no need for ep->timeouts. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
It is possible to get to sctp_v4_get_saddr() without a valid association. This happens when processing OOTB packets and the cached route entry is no longer valid. However, when responding to OOTB packets we already properly set the source address based on the information in the OOTB packet. So, if we we get to sctp_v4_get_saddr() without an association we can simply return. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based mostly upon a patch from Olaf Kirch <okir@suse.de> When initialization fails in inet6_init(), we should unregister the PF_INET6 socket ops. Also, check sock_register()'s return value for errors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Christie 提交于
scsi_wait_req does not exist any more in the SCSI layer. This patch makes it so libata can compile again. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
After the last merge of the new unified 'powerpc' architecture, ppc64 no longer compiles cleanly as a standalone architecture. Some bits and pieces still exist as files under the old ppc64 hierarchy, but the old "ARCH=ppc64" is dead. So if "uname" says ppc64, that now implies that the default architecture should be "powerpc". Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 David S. Miller 提交于
Noticed by Tom 'spot' Callaway. Even on uniprocessor we always reported the number of physical cpus in the system via /proc/cpuinfo. But when this got changed to use num_possible_cpus() it always reads as "1" on uniprocessor. This change was unintentional. So scan the firmware device tree and count the number of cpu nodes, and report that, as we always did. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick Caulfield 提交于
Currently recvmsg generates SIGPIPE whereas sendmsg does not; for the other stacks it seems to be the other way round! It also fixes the bug where reading from a socket whose peer has shutdown returned -EINVAL rather than 0. Signed-off-by: NPatrick Caulfield <patrick@tykepenguin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Hironobu Ishii 提交于
Part of a patch was accidentally reverted, this corrects an inconsistent spinlock use in the IPMI message handler. Signed-off-by: NHironobu Ishii <hishii@soft.fujitsu.com> Signed-off-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Jeff Garzik 提交于
Recent TCP changes broke the build. Signed-off-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 23 次提交
-
-
由 Ralf Baechle 提交于
As part of the ISO C9x conversion gcc deprecates concatenation with __FUNCTION__ because __FUNCTION__ is not a preprocessor macro. Signed-off-by: NClemens Buchacher <drizzd@aon.at> Signed-off-by: NMaximilian Attems <janitor@sternwelten.at> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Pete Popov 提交于
The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Ralf Baechle 提交于
o Try to work around some of the undocumented "features" of the SAA9730 o Use netdev_priv() instead of the previous broken mechanism to allocate the private data structure. o Try to make sure we don't leak resources on exit. o No more need to call SET_MODULE_OWNER in 2.6. o Use pci_free_consistent instead of homegrown architecture-specific allocation. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 531 +++++++++++++++++++++++--------------------------- 1 files changed, 249 insertions(+), 282 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Ralf Baechle 提交于
Kill trailing whitespace, replace leading whitespace with tabs. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 98 +++++++++++++++++++++++++------------------------- 1 files changed, 49 insertions(+), 49 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Ayaz Abdulla 提交于
Added phy address 0 to the phy scan. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
-
由 Ayaz Abdulla 提交于
This patch contains support for different modes of interrupt mitigation of forcedeth. It includes changes based on Jeff's comments. Currently, the modes are changed through module parameters since ethtool does not support something similar. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
-
由 Ayaz Abdulla 提交于
Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com>
-
由 Kumar Gala 提交于
To ensure that phy_mask and any future elements of the mii_bus structure are initialized use kzalloc() instead of kmalloc(). This fixes an issue in which phy_mask was not being initialized and we would skip random phy addresses when scanning. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 7/7] s390: mail address changed From: Frank Pavlic <fpavlic@de.ibm.com> - mail address changed to fpavlic@de.ibm.com Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: lcs.c | 4 ++-- qeth_main.c | 4 ++-- qeth_mpc.c | 2 +- qeth_mpc.h | 2 +- qeth_sys.c | 2 +- qeth_tso.h | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 6/7] s390: introduce guestLan sniffer support in qeth From: Peter Tiedemann <ptiedem@de.ibm.com> - introduce guestLan sniffer support in qeth feature allows a linux in a virtual machine guest to become a network LAN sniffer, monitoring and recording the networking traffic within an entire guestLan. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 2 + qeth_main.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qeth_mpc.h | 11 ++++--- 3 files changed, 102 insertions(+), 4 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 5/7] s390: fix recovery failure of non-guestLAN devices From: Frank Pavlic <fpavlic@de.ibm.com> - Recovery of non-guestLAN Layer 2 device failed due to trying to register the real MAC address we got from the READ_MAC adapter parameters command. We have to keep the "old" MAC address when we process the reply of a READ_MAC. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 12 ++++++------ qeth_main.c | 27 ++++++++++++++++----------- 2 files changed, 22 insertions(+), 17 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 4/7] s390: some more qeth fixes From: Frank Pavlic <fpavlic@de.ibm.com> From: Peter Tiedemann <ptiedem@de.ibm.com> - possible race on list fixed by reset list processing after every operation - traffic hang fixed Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 3/7] s390: qeth multicast address registration fixed From: Klaus Dieter Wacker <kdwacker@de.ibm.com> - when running in Layer2 mode we don't have to register the multicast IP address but only group mac address. Therefore for Layer 2 devices it is enough to go through dev->mc_list list and register these entries. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 106 +++++++++++++++++++++++++++++++++++++++++++++--------------- 1 files changed, 80 insertions(+), 26 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 2/7] s390: minor modification in qeth layer2 code From: Frank Pavlic <fpavlic@de.ibm.com> - use qeth_layer2_send_setdelvlan_cb to check return code of a SET/DELVLAN IP Assist command. It fits better in qeth's design and mechanism of IP Assist command handling. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 40 ++++++++++++++++++++++++++-------------- 1 files changed, 26 insertions(+), 14 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 1/7] s390: synthax checking for VIPA addresses fixed From: Peter Tiedemann <ptiedem@de.ibm.com> - synthax checking for VIPA addresses fixed Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 65 ++++++++++++++++++++++++++++++++++++++++++++++++------------- qeth_sys.c | 6 ++--- 2 files changed, 55 insertions(+), 16 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Alan Cox 提交于
This will let me chop the code size of several drivers right down. In many cases the actual private data is very useful and constant for a given host controller so being able to just pass it at probe time would be very useful indeed (eg with the via driver would could pass the udma clocking and reduce the code size, or with the AMD one the UDMA multiplier and the offset) Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jeff Garzik 提交于
-
由 simon@thekelleys.org.uk 提交于
* Merge PCMCIA card table with new Brodowski PCMCIA id table. * Add missing entries to PCMCIA id table. * Other tweaks to conform with Documentation/driver-changes.txt (types, call request_region, etc) * Fix size of requested IO region. * Reduce printk verbosity. * Remove EXPERIMENTAL * tweak to association code - don't force shared key authentication when wep in use. Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Jeff Garzik 提交于
Contributed by Jeroen <dekien@pandora.be>
-
由 Paul Mackerras 提交于
We needed the VDSO symbols in the arch/ppc asm-offsets.c, and there were a few usages of _systemcfg still left lying around. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
When we created the instructions to read/write SPRs in xmon, we were setting up a ppc64-style procedure descriptor and calling that, which doesn't work in 32-bit. For 32-bit a function pointer just points to the instructions of the function. This fixes it to do the right thing for both 32-bit and 64-bit. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
32-bit SMP powermacs weren't booting with ARCH=powerpc because the boot cpu wasn't saving away the state of various control registers, but the secondary CPUs were loading them from the uninitialized state. This adds the necessary save-state call. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch moves the vdso's to arch/powerpc, adds support for the 32 bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds some new (still untested) routines to both vdso's: clock_gettime() with support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same clocks) and get_tbfreq() for glibc to retreive the timebase frequency. Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits returns a long long (r3, r4) not a long. This is such that if we ever add support for >4Ghz timebases on ppc32, the userland interface won't have to change. I have tested gettimeofday() using some glibc patches in both ppc32 and ppc64 kernels using 32 bits userland (I haven't had a chance to test a 64 bits userland yet, but the implementation didn't change and was tested earlier). I haven't tested yet the new functions. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-