We want to ensure that req->rq_private_buf.len is updated before
req->rq_received, so that call_decode() doesn't use an old value for
req->rq_rcv_buf.len.

In 'call_decode()' itself, instead of using task->tk_status (which is set
using req->rq_received) must use the actual value of
req->rq_private_buf.len when deciding whether or not the received RPC reply
is too short.

Finally ensure that we set req->rq_rcv_buf.len to zero when retrying a
request. A typo meant that we were resetting req->rq_private_buf.len in
call_decode(), and then clobbering that value with the old rq_rcv_buf.len
again in xprt_transmit().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

call_verify() can, under certain circumstances, free the RPC slot. In that
case, our cached pointer 'req = task->tk_rqstp' is invalid. Bug was
introduced in commit 220bcc2a (SUNRPC:
Don't call xprt_release in call refresh).
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In all cases where we currently use rpc_wake_up_task(), we almost always
know on which waitqueue the rpc_task is actually sleeping. This will allows
us to simplify the queue locking in a future patch.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use updated file list for docbook files and
fix kernel-doc warnings in sunrpc:
Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:689): No description found for parameter 'rpc_client'
Warning(linux-2.6.24-git12//net/sunrpc/rpc_pipe.c:765): No description found for parameter 'flags'
Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:584): No description found for parameter 'tk_ops'
Warning(linux-2.6.24-git12//net/sunrpc/clnt.c:618): No description found for parameter 'bufsize'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The caller will never sleep in rpc_execute, so don't bother setting the
sigmask.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up: have the set up routines explicitly pass the strings to be used
for the transport name and NETID.  This removes a number of conditionals
and dependencies on rpc_xprt.prot, which is overloaded.

Tighten up type checking on the address_strings array while we're at it.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In order to be able to support setting the timeo and retrans parameters on
a per-mountpoint basis, we move the rpc_timeout structure into the
rpc_clnt.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There is no reason why we shouldn't just pass the rpc_create_args.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the ULP doesn't pass a hostname string to rpc_create(), it manufactures
one based on the passed-in address.  Be smart enough to handle an AF_INET6
address properly in this case.

Move the default servername logic before the xprt_create_transport() call
to simplify error handling in rpc_create().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In preparation for the removal of rpc_call_setup().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To ensure that the RPCSEC_GSS upcall is performed with the correct sigmask.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make it use the new task initialiser structure instead of acting as a
wrapper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The sunrpc client exports are not meant to be part of any official kernel
API: they can change at the drop of a hat. Mark them as internal functions
using EXPORT_SYMBOL_GPL.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Do this for all RPC client related functions and XDR functions.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the calls to xprt_disconnect() over to xprt_force_disconnect() in
order to enable the transport layer to manage the state of the
XPRT_CONNECTED flag.
Ditto in xs_tcp_read_fraghdr().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr'
mount option.  We have to use _killable everywhere instead of _interruptible
as we get rid of rpc_clnt_sigmask/sigunmask.
Signed-off-by: NLiam R. Howlett <howlett@gmail.com>
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>

Call it from call_verify() instead...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It completely fouls up the RPC call statistics, and serves no useful
purpose.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Since 43780b87..., rpc_create() fills in a default hostname based on
the ip address if the servername passed in is null.  A small typo made
that default incorrect.  (But this information appears to be used only
for debugging right now, so I don't believe the typo causes any bugs in
the current kernel.)

Thanks to Olga Kornievskaia for bug report and testing.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Cc: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To prepare for including non-sockets-based RPC transports, select
RPC transports by an identifier (to be used in following patches).
Signed-off-by: NTom Talpey <tmt@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To prepare for including non-sockets-based RPC transports, change the
overly suggestive name of the transport creation arguments struct.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Adds a flag word to the xdrbuf struct which indicates any bulk
disposition of the data. This enables RPC transport providers to
marshal it efficiently/appropriately, and may enable other
optimizations.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The purpose of an RPC ping (a NULL request) is to determine whether the
remote end is operating and supports the RPC program and version of the
request.

If we do an RPC bind and the remote's rpcbind service says "this
program or service isn't supported" then we have our answer already,
and we should give up immediately.

This is good for the kernel mount client, as it will cause the request
to fail, and then allow an immediate retry with different options.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add more new error code processing to the kernel's rpcbind client
and to call_bind_status() to distinguish two cases:

Case 1: the remote has replied that the program/version tuple is not
registered (returns EACCES)

Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT)

This change allows more specific error processing for each of these two
cases.  We now fail case 2 instead of retrying... it's a server
configuration error not to support even rpcbind version 2.  And don't
expose this new error code to user land -- convert it to EIO before
failing the RPC.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add new error code processing to the kernel's rpcbind client and to
call_bind_status() to distinguish two cases:

Case 1: the remote has replied that the program/version tuple is not
registered (returns -EACCES)

Case 2: another process is already in the middle of binding on this
transport (now returns -EAGAIN)

This change allows more specific retry processing for each of these two
cases.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’:
/home/cel/linux/net/sunrpc/clnt.c:1538: warning:
	signed and unsigned type in conditional expression

This points out another case where a conditional expression returns a
signed value in one arm and an unsigned value in the other.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Check the length of the passed-in server name before trying to print it in
the log.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’:
/home/cel/linux/net/sunrpc/clnt.c:445: warning:
	comparison between signed and unsigned

RPC version numbers are u32, not int.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Remove one of two identical dprintk's that occur when an RPC client is
created.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We don't need the BKL when wrapping and unwrapping; and experiments by Avishay
Traeger have found that permitting multiple encryption and decryption
operations to proceed in parallel can provide significant performance
improvements.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Cc: Avishay Traeger <atraeger@cs.sunysb.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In addition to binding to a local privileged port the NFS client should
allow binding to a specific local address. This is used by the server
for callbacks. The patch adds the necessary interface.
Signed-off-by: NFrank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Cleanup argument passing to functions for creating an RPC transport.
Signed-off-by: NFrank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

A couple of callers just use a stringified IP address for the rpc client's
hostname.  Move the logic for constructing this into rpc_create(), so it can
be shared.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Convert them into dprintk() calls.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We should almost always be deferencing the rpc_auth struct by means of the
credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up
that historical mistake, and remove the macro that propagated it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>