The host nqn actually is smaller than the space reserved for it,
so we should be using strlcpy to keep KASAN happy.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Use blk_rq_nr_phys_segments() instead of blk_rq_payload_bytes() to check
if a command contains data to me mapped.  This fixes the case where
a struct requests contains LBAs, but no data will actually be send,
e.g. the pending Write Zeroes support.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Todays limit on concurrent LS's is very small - 4 buffers. With large
subsystem counts or large numbers of initiators connecting, the limit
may be exceeded.

Raise the LS buffer count to 256.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This patch adds simple file backed namespace support for NVMeOF target.

The new file io-cmd-file.c is responsible for handling the code for I/O
commands when ns is file backed. Also, we introduce mempools based slow
path using sync I/Os for file backed ns to ensure forward progress under
reclaim.

The old block device based implementation is moved to io-cmd-bdev.c and
use a "nvmet_bdev_" symbol prefix.  The enable/disable calls are also
move into the respective files.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: updated changelog, fixed double req->ns lookup in bdev case]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove the duplicate NULL initialization for req->ns.  req->ns is always
initialized to NULL in nvmet_req_init(), so there is no need to reset
it later on failures unless we have previously assigned a value to it.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

"nvmet_check_ctrl_status()" is called from admin-cmd.c along
with io-cmd.c, make the error message more generic.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The whole point of the discovery controller is that it can accept
multiple connections. Additionally the cmic field is not even defined for
the discovery controller identify page.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When connecting to the discovery controller we have certain defaults
to observe, so centralize them to avoid inconsistencies due to argument
ordering.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

After creating the nvme controller, nvmf_create_ctrl() validates
the newly created subsysnqn vs the one specified by the options.

In general, this is an unnecessary check as the Connect message
should implicitly ensure this value matches.

With the change to the FC transport to do an asynchronous connect
for the first association create, the transport will return to
nvmf_create_ctrl() before that first association has been established,
thus the subnqn will not yet be set.

Remove the unnecessary validation.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Current code will set DNR if the controller is deleting or there is
an error during controller init. None of this is necessary.

Remove the code that sets DNR
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

For any failure after nvme_rdma_start_queue in
nvme_rdma_configure_admin_queue, the admin queue will be freed with the
NVME_RDMA_Q_LIVE flag still set.  Once nvme_rdma_stop_queue is invoked,
that will cause a use-after-free.
BUG: KASAN: use-after-free in rdma_disconnect+0x1f/0xe0 [rdma_cm]

To fix it, call nvme_rdma_stop_queue for all the failed cases after
nvme_rdma_start_queue.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Suggested-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The nvme timeout handling doesn't do anything if the pci channel is
offline, which is the case when recovering from PCI error event, so it
was a bad idea to sync the controller reset in this state. This patch
flushes the reset work in the error_resume callback instead when the
channel is back to online. This keeps AER handling serialized and
can recover from timeouts.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199757
Fixes: cc1d5e74 ("nvme/pci: Sync controller reset for AER slot_reset")
Reported-by: NAlex Gagniuc <mr.nuke.me@gmail.com>
Tested-by: NAlex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Set cq_vector after alloc cq/sq, otherwise nvme_suspend_queue will invoke
free_irq for it and cause a 'Trying to free already-free IRQ  xxx'
warning if the create CQ/SQ command times out.
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
[hch: fixed to pass a s16 and clean up the comment]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Ternary operator have lower precedence then bitwise or, so 'cdw10' was
calculated wrong.
Signed-off-by: NIvan Bornyakov <brnkv.i1@gmail.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NKeith Busch <keith.busch@intel.com>

When running blktest's nvme/005 with a lockdep enabled kernel the test
case fails due to the following lockdep splat in dmesg:

 =============================
 WARNING: suspicious RCU usage
 4.17.0-rc5 #881 Not tainted
 -----------------------------
 drivers/nvme/host/nvme.h:457 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 3 locks held by kworker/u32:5/1102:
  #0:         (ptrval) ((wq_completion)"nvme-wq"){+.+.}, at: process_one_work+0x152/0x5c0
  #1:         (ptrval) ((work_completion)(&ctrl->scan_work)){+.+.}, at: process_one_work+0x152/0x5c0
  #2:         (ptrval) (&subsys->lock#2){+.+.}, at: nvme_ns_remove+0x43/0x1c0 [nvme_core]

The only caller of nvme_mpath_clear_current_path() is nvme_ns_remove()
which holds the subsys lock so it's likely a false positive, but when
using rcu_access_pointer(), we're telling rcu and lockdep that we're
only after the pointer falue.

Fixes: 32acab31 ("nvme: implement multipath access to nvme subsystems")
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Suggested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <keith.busch@intel.com>

Avoid that complaints similar to the following appear in the kernel log
if the number of zones is sufficiently large:

  fio: page allocation failure: order:9, mode:0x140c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
  Call Trace:
  dump_stack+0x63/0x88
  warn_alloc+0xf5/0x190
  __alloc_pages_slowpath+0x8f0/0xb0d
  __alloc_pages_nodemask+0x242/0x260
  alloc_pages_current+0x6a/0xb0
  kmalloc_order+0x18/0x50
  kmalloc_order_trace+0x26/0xb0
  __kmalloc+0x20e/0x220
  blkdev_report_zones_ioctl+0xa5/0x1a0
  blkdev_ioctl+0x1ba/0x930
  block_ioctl+0x41/0x50
  do_vfs_ioctl+0xaa/0x610
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x79/0x1b0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 3ed05a98 ("blk-zoned: implement ioctls")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Shaun Tancheff <shaun.tancheff@seagate.com>
Cc: Damien Le Moal <damien.lemoal@hgst.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound
to a single CPU that is selected at device creation time.
Signed-off-by: NDan Melnic <dmm@fb.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When dispatch_rq_from_ctx is called, in the vast majority of cases
the ctx->rq_list is not empty.
Signed-off-by: Nhuhai <huhai@kylinos.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If polling completions are racing with the IRQ triggered by a
completion, the IRQ handler will find no work and return IRQ_NONE.
This can trigger complaints about spurious interrupts:

[  560.169153] irq 630: nobody cared (try booting with the "irqpoll" option)
[  560.175988] CPU: 40 PID: 0 Comm: swapper/40 Not tainted 4.17.0-rc2+ #65
[  560.175990] Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.00.01.0010.010920180151 01/09/2018
[  560.175991] Call Trace:
[  560.175994]  <IRQ>
[  560.176005]  dump_stack+0x5c/0x7b
[  560.176010]  __report_bad_irq+0x30/0xc0
[  560.176013]  note_interrupt+0x235/0x280
[  560.176020]  handle_irq_event_percpu+0x51/0x70
[  560.176023]  handle_irq_event+0x27/0x50
[  560.176026]  handle_edge_irq+0x6d/0x180
[  560.176031]  handle_irq+0xa5/0x110
[  560.176036]  do_IRQ+0x41/0xc0
[  560.176042]  common_interrupt+0xf/0xf
[  560.176043]  </IRQ>
[  560.176050] RIP: 0010:cpuidle_enter_state+0x9b/0x2b0
[  560.176052] RSP: 0018:ffffa0ed4659fe98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[  560.176055] RAX: ffff9527beb20a80 RBX: 000000826caee491 RCX: 000000000000001f
[  560.176056] RDX: 000000826caee491 RSI: 00000000335206ee RDI: 0000000000000000
[  560.176057] RBP: 0000000000000001 R08: 00000000ffffffff R09: 0000000000000008
[  560.176059] R10: ffffa0ed4659fe78 R11: 0000000000000001 R12: ffff9527beb29358
[  560.176060] R13: ffffffffa235d4b8 R14: 0000000000000000 R15: 000000826caed593
[  560.176065]  ? cpuidle_enter_state+0x8b/0x2b0
[  560.176071]  do_idle+0x1f4/0x260
[  560.176075]  cpu_startup_entry+0x6f/0x80
[  560.176080]  start_secondary+0x184/0x1d0
[  560.176085]  secondary_startup_64+0xa5/0xb0
[  560.176088] handlers:
[  560.178387] [<00000000efb612be>] nvme_irq [nvme]
[  560.183019] Disabling IRQ #630

A previous commit removed ->cqe_seen that was handling this case,
but we need to handle this a bit differently due to completions
now running outside the queue lock. Return IRQ_HANDLED from the
IRQ handler, if the completion ring head was moved since we last
saw it.

Fixes: 5cb525c8 ("nvme-pci: handle completions outside of the queue lock")
Reported-by: NKeith Busch <keith.busch@intel.com>
Reviewed-by: NKeith Busch <keith.busch@intel.com>
Tested-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NVMe changes from Keith:

"This is just the first nvme pull request for 4.18. There are several
fabrics and target patches that I missed, so there will be more to
come."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-pci: drop IRQ disabling on submission queue lock
  nvme-pci: split the nvme queue lock into submission and completion locks
  nvme-pci: handle completions outside of the queue lock
  nvme-pci: move ->cq_vector == -1 check outside of ->q_lock
  nvme-pci: remove cq check after submission
  nvme-pci: simplify nvme_cqe_valid
  nvme: mark the result argument to nvme_complete_async_event volatile
  nvme/pci: Sync controller reset for AER slot_reset
  nvme/pci: Hold controller reference during async probe
  nvme: only reconfigure discard if necessary
  nvme/pci: Use async_schedule for initial reset work
  nvme: lightnvm: add granby support
  NVMe: Add Quirk Delay before CHK RDY for Seagate Nytro Flash Storage
  nvme: change order of qid and cmdid in completion trace
  nvme: fc: provide a descriptive error

Since we aren't sharing the lock for completions now, we don't
have to make it IRQ safe.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This is now feasible. We protect the submission queue ring with
->sq_lock, and the completion side with ->cq_lock.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Split the completion of events into a two part process:

1) Reap the events inside the queue lock
2) Complete the events outside the queue lock

Since we never wrap the queue, we can access it locklessly after we've
updated the completion queue head. This patch started off with batching
events on the stack, but with this trick we don't have to. Keith Busch
<keith.busch@intel.com> came up with that idea.

Note that this kills the ->cqe_seen as well. I haven't been able to
trigger any ill effects of this. If we do race with polling every so
often, it should be rare enough NOT to trigger any issues.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[hch: refactored, restored poll early exit optimization]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We only clear it dynamically in nvme_suspend_queue(). When we do, ensure
to do a full flush so that any nvme_queue_rq() invocation will see it.

Ideally we'd kill this check completely, but we're using it to flush
requests on a dying queue.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We always check the completion queue after submitting, but in my testing
this isn't a win even on DRAM/xpoint devices. In some cases it's
actually worse. Kill it.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

We always look at the current CQ head and phase, so don't pass these
as separate arguments, and rename the function to nvme_cqe_pending.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We'll need that in the PCIe driver soon as we'll read it straight off the
CQ.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When the number of hardware queues is changed, the drivers will call
blk_mq_update_nr_hw_queues() to remap hardware queues. This changes
the ctx mappings, but the current code doesn't clear the
->dispatch_from hint. This can result in dispatch_from pointing to
a ctx that isn't mapped to the hctx anymore.

Fixes: b347689f ("blk-mq-sched: improve dispatching from sw queue")
Signed-off-by: Nhuhai <huhai@kylinos.cn>
Reviewed-by: NMing Lei <ming.lei@redhat.com>

Moved the placement of the clearing to where we clear other items
pertaining to the existing mapping, added Fixes line, and reworded
the commit message.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We need to make sure we don't just set the size of the bdev to 0 while
it's being used by a file system.  We have the appropriate check in
nbd_bdev_reset, simply use that helper instead.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bd_invalidated is kind of a pain wrt partitions as it really only
triggers the partition rescan if it is set after bd_ops->open() runs, so
setting it when we reset the device isn't useful.  We also sporadically
would still have partitions left over in some disconnect cases, so fix
this by always setting bd_invalidated on open if there's no
configuration or if we've had a disconnect action happen, that way the
partition table gets invalidated and rescanned properly.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is what the ioctl based nbd disconnect does as well.  Without this
the device will just sit there and wait for the connection to go away
(or IO to occur) before the device gets torn down.  Instead clear
everything up on our end so the configuration goes away as quickly as
possible.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on.  We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.

Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent.  Fix this by
updating everything if we're connected and we change the size.

cc: stable@vger.kernel.org
Fixes: 639812a1 ("nbd: don't set the device size until we're connected")
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk).  Save the queue and do the cleanup after
the del_gendisk.

Fixes: c6a4759e ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

I've been missing stuff because it's been going into my work email which
is a black hole.  Update to the email I actually use so I stop missing
patches and bug reports.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We can use blk_mq_sched_insert_request() even if we don't have
an IO scheduler attached, since that case will end up being
exactly the same as what blk_mq_queue_io() was doing now.
Signed-off-by: Nhuhai <huhai@kylinos.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Nobody is using it anymore, and it's been abandoned. Since David
is fine with removing it, kill it.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Recently found a bug where a driver left bi_next not NULL and then
called bio_endio(), and then the submitter of the bio used
bio_copy_data() which was treating src and dst as lists of bios.

Fixed that bug by splitting out bio_list_copy_data(), but in case other
things are depending on bi_next in weird ways, add a warning to help
avoid more bugs like that in the future.
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>