This is to find node id from acpi's handle of memory_device in DSDT.  _PXM for
the new node can be found by acpi_get_pxm() by using new memory's handle.  So,
node id can be found by pxm_to_nid_map[].

  This patch becomes simpler than v2 of node hot-add patch.
  Because old add_memory() function doesn't have node id parameter.
  So, kernel must find its handle by physical address via DSDT again.
  But, v3 just give node id to add_memory() now.
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Catch notification of memory add event of ACPI via container driver. (avoid redundant call add_memory)

When acpi_memory_device_init() is called at boottime to register struct
memory acpi_memory_device, acpi_bus_add() are called via
acpi_driver_attach().

But it also calls ops->start() function.  It is called even if the memory
blocks are initialized at early boottime.  In this case add_memory() return
-EEXIST, and the memory blocks becomes INVALID state even if it is normal.

This is patch to avoid calling add_memory() for already available memory.

[akpm@osdl.org: coding cleanups]
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Catch notification of memory add event of ACPI via container driver. (register start func for memory device)

This is a patch to call add_memroy() when notify reaches for new node's add
event.

When new node is added, notify of ACPI reaches container device which means
the node.

Container device driver calls acpi_bus_scan() to find and add belonging
devices (which means cpu, memory and so on).  Its function calls add and
start function of belonging devices's driver.

Howevever, current memory hotplug driver just register add function to
create sysfs file for its memory.  But, acpi_memory_enable_device() is not
called because it is considered just the case that notify reaches memory
device directly.  So, if notify reaches container device nothing can call
add_memory().

This is a patch to create start function which calls add_memory().
add_memory() can be called by this when notify reaches container device.

[akpm@osdl.org: coding cleanups]
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Current acpi memory hotplug just looks into the first entry of resources in
_CRS.  But, _CRS can contain plural resources.  So, if _CRS contains plural
resoureces, acpi memory hot add cannot add all memory.

With this patch, acpi memory hotplug can deal with Memory Device, whose
_CRS contains plural resources.

Tested on ia64 memory hotplug test envrionment (not emulation, uses alpha
version firmware which supports dynamic reconfiguration of NUMA.)

Note: Microsoft's Windows Server 2003 requires big (>4G)resoureces to be
      divided into small (<4G) resources. looks crazy, but not invalid.
      (See http://www.microsoft.com/whdc/system/pnppwr/hotadd/hotaddmem.mspx)
      For this reason, a firmware vendor who supports Windows writes plural
      resources in a _CRS even if they are contiguous.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Address space descriptors contain _MIN, _MAX, and _LEN.  _MIN and _MAX are
the bounds within which the region can be moved (this is clarified in Table
6-38 of the ACPI 3.0 spec).  We should use _LEN to determine the size of
the region, not _MAX - _MIN + 1.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

drivers/acpi/acpi_memhotplug.c: In function `acpi_memory_get_device_resources':
drivers/acpi/acpi_memhotplug.c:101: error: structure has no member named `attribute'
drivers/acpi/acpi_memhotplug.c:103: error: structure has no member named `attribute'
drivers/acpi/acpi_memhotplug.c: In function `acpi_memory_disable_device':
drivers/acpi/acpi_memhotplug.c:253: warning: unused variable `attr'
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)

All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".

The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available.  Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)

Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.

acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This basically keeps up from having to extern __kmalloc_section_memmap().

The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that
header gets hard to work with, because it needs some arch-specific macros.
Just stick it in here for now, instead of creating another header.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NLion Vollnhals <webmaster@schiggl.de>
Signed-off-by: NJiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NLen Brown <len.brown@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!