1. 01 11月, 2014 6 次提交
    • A
      stmmac: pci: set default of the filter bins · 1e19e084
      Andy Shevchenko 提交于
      The commit 3b57de95 brought the support for a different amount of the
      filter bins, but didn't update the PCI driver accordingly. This patch appends
      the default values when the device is enumerated via PCI bus.
      
      Fixes: 3b57de95 (net: stmmac: Support devicetree configs for mcast and ucast filter entries)
      Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1e19e084
    • T
      net: smc91x: Fix gpios for device tree based booting · 7d2911c4
      Tony Lindgren 提交于
      With legacy booting, the platform init code was taking care of
      the configuring of GPIOs. With device tree based booting, things
      may or may not work depending what bootloader has configured or
      if the legacy platform code gets called.
      
      Let's add support for the pwrdn and reset GPIOs to the smc91x
      driver to fix the issues of smc91x not working properly when
      booted in device tree mode.
      
      And let's change n900 to use these settings as some versions
      of the bootloader do not configure things properly causing
      errors.
      Reported-by: NKevin Hilman <khilman@linaro.org>
      Signed-off-by: NTony Lindgren <tony@atomide.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7d2911c4
    • P
      mpls: Allow mpls_gso to be built as module · de05c400
      Pravin B Shelar 提交于
      Kconfig already allows mpls to be built as module. Following patch
      fixes Makefile to do same.
      
      CC: Simon Horman <simon.horman@netronome.com>
      Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
      Acked-by: NSimon Horman <simon.horman@netronome.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      de05c400
    • P
      mpls: Fix mpls_gso handler. · f7065f4b
      Pravin B Shelar 提交于
      mpls gso handler needs to pull skb after segmenting skb.
      
      CC: Simon Horman <simon.horman@netronome.com>
      Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
      Acked-by: NSimon Horman <simon.horman@netronome.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7065f4b
    • H
      r8152: stop submitting intr for -EPROTO · d59c876d
      hayeswang 提交于
      For Renesas USB 3.0 host controller, when unplugging the usb hub which
      has the RTL8153 plugged, the driver would get -EPROTO for interrupt
      transfer. There is high probability to get the information of "HC died;
      cleaning up", if the driver continues to submit the interrupt transfer
      before the disconnect() is called.
      
      [ 1024.197678] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.213673] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.229668] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.245661] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.261653] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.277648] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.293642] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.309638] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.325633] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.341627] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.357621] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.373615] r8152 9-1.4:1.0 eth0: intr status -71
      [ 1024.383097] usb 9-1: USB disconnect, device number 2
      [ 1024.383103] usb 9-1.4: USB disconnect, device number 6
      [ 1029.391010] xhci_hcd 0000:04:00.0: xHCI host not responding to stop endpoint command.
      [ 1029.391016] xhci_hcd 0000:04:00.0: Assuming host is dying, halting host.
      [ 1029.392551] xhci_hcd 0000:04:00.0: HC died; cleaning up
      [ 1029.421480] usb 8-1: USB disconnect, device number 2
      Signed-off-by: NHayes Wang <hayeswang@realtek.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d59c876d
    • D
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · e3a88f9c
      David S. Miller 提交于
      Pablo Neira Ayuso says:
      
      ====================
      netfilter/ipvs fixes for net
      
      The following patchset contains fixes for netfilter/ipvs. This round of
      fixes is larger than usual at this stage, specifically because of the
      nf_tables bridge reject fixes that I would like to see in 3.18. The
      patches are:
      
      1) Fix a null-pointer dereference that may occur when logging
         errors. This problem was introduced by 4a4739d5 ("ipvs: Pull
         out crosses_local_route_boundary logic") in v3.17-rc5.
      
      2) Update hook mask in nft_reject_bridge so we can also filter out
         packets from there. This fixes 36d2af59 ("netfilter: nf_tables: allow
         to filter from prerouting and postrouting"), which needs this chunk
         to work.
      
      3) Two patches to refactor common code to forge the IPv4 and IPv6
         reject packets from the bridge. These are required by the nf_tables
         reject bridge fix.
      
      4) Fix nft_reject_bridge by avoiding the use of the IP stack to reject
         packets from the bridge. The idea is to forge the reject packets and
         inject them to the original port via br_deliver() which is now
         exported for that purpose.
      
      5) Restrict nft_reject_bridge to bridge prerouting and input hooks.
         the original skbuff may cloned after prerouting when the bridge stack
         needs to flood it to several bridge ports, it is too late to reject
         the traffic.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3a88f9c
  2. 31 10月, 2014 21 次提交
  3. 30 10月, 2014 10 次提交
  4. 29 10月, 2014 3 次提交