Document some of the hotplug notifier usage.
Requested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds new IOMMU performance event based on
the information in table 74 of the AMD I/O Virtualization Technology
(IOMMU) Specification (Document Id: 4882, Rev 2.62, Feb 2015)
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NJoerg Roedel <jroedel@suse.de>
Acked-by: NJoerg Roedel <jroedel@suse.de>
Cc: <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://support.amd.com/TechDocs/48882_IOMMU.pdfSigned-off-by: NIngo Molnar <mingo@kernel.org>

nodes_per_socket is static and it needn't be initialized many
times during every CPU core init. So move its initialization into
bsp_init_amd().
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: spg_linux_kernel@amd.com
Link: http://lkml.kernel.org/r/1452739808-11871-2-git-send-email-ray.huang@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Having the same code twice (and once quite ugly) is fragile.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds a per package timer which periodically updates the
memory bandwidth counters for the events that are currently active.

Current patch has a periodic timer every 1s since the SDM guarantees
that the counter will not overflow in 1s but this time can be definitely
improved by calibrating on the system. The overflow is really a function
of the max memory b/w that the socket can support, max counter value and
scaling factor.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/013b756c5006b1c4ca411f3ecf43ed52f19fbf87.1457723885.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

RMID could be allocated or deallocated as part of RMID recycling.

When an RMID is allocated for MBM event, the MBM counter needs to be
initialized because next time we read the counter we need the previous
value to account for total bytes that went to the memory controller.

Similarly, when RMID is deallocated we need to update the ->count
variable.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1457652732-4499-6-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Includes all the core infrastructure to measure the total_bytes and
bandwidth.

We have per socket counters for both total system wide L3 external
bytes and local socket memory-controller bytes. The OS does MSR writes
to MSR_IA32_QM_EVTSEL and MSR_IA32_QM_CTR to read the counters and
uses the IA32_PQR_ASSOC_MSR to associate the RMID with the task. The
tasks have a common RMID for CQM (cache quality of service monitoring)
and MBM. Hence most of the scheduling code is reused from CQM.
Signed-off-by: NTony Luck <tony.luck@intel.com>
[ Restructured rmid_read to not have an obvious hole, removed MBM_CNTR_MAX as its unused. ]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/abd7aac9a18d93b95b985b931cf258df0164746d.1457723885.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The MBM init patch enumerates the Intel MBM (Memory b/w monitoring)
and initializes the perf events and datastructures for monitoring the
memory b/w.

Its based on original patch series by Tony Luck and Kanaka Juvva.

Memory bandwidth monitoring (MBM) provides OS/VMM a way to monitor
bandwidth from one level of cache to another. The current patches
support L3 external bandwidth monitoring. It supports both 'local
bandwidth' and 'total bandwidth' monitoring for the socket. Local
bandwidth measures the amount of data sent through the memory controller
on the socket and total b/w measures the total system bandwidth.

Extending the cache quality of service monitoring (CQM) we add two
more events to the perf infrastructure:

  intel_cqm_llc/local_bytes - bytes sent through local socket memory controller
  intel_cqm_llc/total_bytes - total L3 external bytes sent

The tasks are associated with a Resouce Monitoring ID (RMID) just like
in CQM and OS uses a MSR write to indicate the RMID of the task during
scheduling.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1457652732-4499-4-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fixes the hotcpu notifier leak and other global variable memory leaks
during CQM (cache quality of service monitoring) initialization.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1457652732-4499-3-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently CQM (cache quality of service monitoring) is grouping all
events belonging to same PID to use one RMID. However its not counting
all of these different events. Hence we end up with a count of zero
for all events other than the group leader.

The patch tries to address the issue by keeping a flag in the
perf_event.hw which has other CQM related fields. The field is updated
at event creation and during grouping.
Signed-off-by: NVikas Shivappa <vikas.shivappa@linux.intel.com>
[peterz: Changed hw_perf_event::is_group_event to an int]
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: fenghua.yu@intel.com
Cc: h.peter.anvin@intel.com
Cc: ravi.v.shankar@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1457652732-4499-2-git-send-email-vikas.shivappa@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Sasha reported:

 [ 3494.030114] UBSAN: Undefined behaviour in kernel/events/ring_buffer.c:685:22
 [ 3494.030647] shift exponent -1 is negative

Andrey spotted that this is because:

  It happens if nr_pages = 0:
     rb->page_order = ilog2(nr_pages);

Fix it by making both assignments conditional on nr_pages; since
otherwise they should both be 0 anyway, and will be because of the
kzalloc() used to allocate the structure.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Reported-by: NAndrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20160129141751.GA407@worktopSigned-off-by: NIngo Molnar <mingo@kernel.org>

This splat reminds us:

[ 8166.045595] [ INFO: suspicious RCU usage. ]

[ 8166.168972]  [<ffffffff81127837>] lockdep_rcu_suspicious+0xe7/0x120
[ 8166.175966]  [<ffffffff811e0bae>] perf_callchain+0x23e/0x250
[ 8166.182280]  [<ffffffff811dda3d>] perf_prepare_sample+0x27d/0x350
[ 8166.189082]  [<ffffffff8100f503>] intel_pmu_drain_bts_buffer+0x133/0x200

... that as the core code does, one should hold rcu_read_lock() over that
entire BTS event-output generation sequence as well.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

There were two problems with the dynamic interrupt throttle mechanism,
both triggered by the same action.

When you (or perf_fuzzer) write a huge value into
/proc/sys/kernel/perf_event_max_sample_rate the computed
perf_sample_allowed_ns becomes 0. This effectively disables the whole
dynamic throttle.

This is fixed by ensuring update_perf_cpu_limits() never sets the
value to 0. However, we allow disabling of the dynamic throttle by
writing 100 to /proc/sys/kernel/perf_cpu_time_max_percent. This will
generate a warning in dmesg.

The second problem is that by setting the max_sample_rate to a huge
number, the adaptive process can take a few tries, since it halfs the
limit each time. Change that to directly compute a new value based on
the observed duration.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Interrupt throttling is normally only done against
sysctl_perf_event_sample_rate. This means that if that number is too
high (for whatever reason) you can lock up your machine.

We have, however, a dynamic throttling scheme too, but for that to
work, we need to add a callback to the interrupt handler, IBS did not
have this, so add it.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

While tracing the IBS bits I saw the NMI hitting between clearing
IBS_STARTING and the actual MSR writes to disable the counter.

Since IBS_STARTING was cleared, the handler assumed these were spurious
NMIs and because STOPPING wasn't set yet either, insta-triggered an
"Unknown NMI".

Cure this by clearing IBS_STARTING after disabling the hardware.
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When the IBS IRQ handler get a !0 return from perf_event_overflow;
meaning it should throttle the event, it only disables it, it doesn't
call perf_ibs_stop().

This confuses the state machine, as we'll use pmu::start() ->
perf_ibs_start() to unthrottle.
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dvyukov@google.com
Cc: oleg@redhat.com
Cc: panand@redhat.com
Cc: sasha.levin@oracle.com
Link: http://lkml.kernel.org/r/20160311142346.GE6344@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Its possible to IOC_PERIOD while the event is throttled, this would
re-start the event and the next tick would then try to unthrottle it,
and find the event wasn't actually stopped anymore.

This would tickle a WARN in the x86-pmu code which isn't expecting to
start a !stopped event.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: dvyukov@google.com
Cc: oleg@redhat.com
Cc: panand@redhat.com
Cc: sasha.levin@oracle.com
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20160310143924.GR6356@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

We really do not want to keep that nmi enabled across suspend/resume.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Magic hex constants are a guarantee for wreckage when the defines change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The notifier is missing the CPU_DOWN_FAILED transition. That leaves the
heartbeat disabled when CPU_DOWN_PREPARE fails.

It also does not handle the FROZEN transition variants. That might not be an
issue for UV, but it's inconsistent.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>

Magic hex constants are a guarantee for wreckage when the defines change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

nr_cpu_ids can be limited on the command line via nr_cpus=. That can break the
logical package management because it results in a smaller number of packages,
but the cpus to online are occupying the full package space as the hyper
threads are enumerated after the physical cores typically.

total_cpus is the real possible cpu space not limited by nr_cpus command line
and gives us the proper number of packages.
Reported-by: NMike Galbraith <umgwanakikbuti@gmail.com>
Fixes: 1f12e32f ("x86/topology: Create logical package id")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Xiong Zhou <jencce.kernel@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andreas Herrmann <aherrmann@suse.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603181254330.3978@nanos

As per the comment in the code; due to BIOS it is sometimes impossible to know
if there actually are smp siblings until the machine is fully enumerated. So
we rather overestimate the number of possible packages.

Fixes: 1f12e32f ("x86/topology: Create logical package id")
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: aherrmann@suse.com
Cc: jencce.kernel@gmail.com
Cc: bp@alien8.de
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Link: http://lkml.kernel.org/r/20160318150538.611014173@infradead.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

That first branch testing pkg against __max_logical_packages is wrong,
because if the first pkg id is larger, then the find_first_zero will
find us logical package id 0. However, if the second pkg id is indeed
0, we'll again claim it without testing if it was already taken.

Also, it fails to print the mapping.

Fixes: 1f12e32f ("x86/topology: Create logical package id")
Reported-by: NXiong Zhou <jencce.kernel@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: aherrmann@suse.com
Cc: bp@alien8.de
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Link: http://lkml.kernel.org/r/20160317095220.GO6344@twins.programming.kicks-ass.net
Link: http://lkml.kernel.org/r/20160318150538.482393396@infradead.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Harry reported, that he's able to trigger a system freeze with cpu hot
unplug. The freeze turned out to be a live lock caused by recent changes in
irq_force_complete_move().

When fixup_irqs() and from there irq_force_complete_move() is called on the
dying cpu, then all other cpus are in stop machine an wait for the dying cpu
to complete the teardown. If there is a move of an interrupt pending then
irq_force_complete_move() sends the cleanup IPI to the cpus in the old_domain
mask and waits for them to clear the mask. That's obviously impossible as
those cpus are firmly stuck in stop machine with interrupts disabled.

I should have known that, but I completely overlooked it being concentrated on
the locking issues around the vectors. And the existance of the call to
__irq_complete_move() in the code, which actually sends the cleanup IPI made
it reasonable to wait for that cleanup to complete. That call was bogus even
before the recent changes as it was just a pointless distraction.

We have to look at two cases:

1) The move_in_progress flag of the interrupt is set

   This means the ioapic has been updated with the new vector, but it has not
   fired yet. In theory there is a race:

   set_ioapic(new_vector) <-- Interrupt is raised before update is effective,
   			      i.e. it's raised on the old vector. 

   So if the target cpu cannot handle that interrupt before the old vector is
   cleaned up, we get a spurious interrupt and in the worst case the ioapic
   irq line becomes stale, but my experiments so far have only resulted in
   spurious interrupts.

   But in case of cpu hotplug this should be a non issue because if the
   affinity update happens right before all cpus rendevouz in stop machine,
   there is no way that the interrupt can be blocked on the target cpu because
   all cpus loops first with interrupts enabled in stop machine, so the old
   vector is not yet cleaned up when the interrupt fires.

   So the only way to run into this issue is if the delivery of the interrupt
   on the apic/system bus would be delayed beyond the point where the target
   cpu disables interrupts in stop machine. I doubt that it can happen, but at
   least there is a theroretical chance. Virtualization might be able to
   expose this, but AFAICT the IOAPIC emulation is not as stupid as the real
   hardware.

   I've spent quite some time over the weekend to enforce that situation,
   though I was not able to trigger the delayed case.

2) The move_in_progress flag is not set and the old_domain cpu mask is not
   empty.

   That means, that an interrupt was delivered after the change and the
   cleanup IPI has been sent to the cpus in old_domain, but not all CPUs have
   responded to it yet.

In both cases we can assume that the next interrupt will arrive on the new
vector, so we can cleanup the old vectors on the cpus in the old_domain cpu
mask.

Fixes: 98229aa3 "x86/irq: Plug vector cleanup race"
Reported-by: NHarry Junior <harryjr@outlook.fr>
Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603140931430.3657@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The topology_core_cpumask is used to find a neighbour cpu in
calibrate_delay_is_known(). It might not be allocated at the first invocation
of that function on the boot cpu, when CONFIG_CPUMASK_OFFSTACK is set.

The mask is allocated later in native_smp_prepare_cpus. As a consequence the
underlying find_next_bit() call dereferences a NULL pointer.

Add a proper check to prevent this.

Fixes: c25323c0 "x86/tsc: Use topology functions"
Reported-and-tested-by: NRichard W.M. Jones <rjones@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1603180843270.3978@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Since 4.4, I've been able to trigger this occasionally:

===============================
[ INFO: suspicious RCU usage. ]
4.5.0-rc7-think+ #3 Not tainted
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20160315012054.GA17765@codemonkey.org.ukSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

-------------------------------
./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 1
RCU used illegally from extended quiescent state!
no locks held by swapper/3/0.

stack backtrace:
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.5.0-rc7-think+ #3
 ffffffff92f821e0 1f3e5c340597d7fc ffff880468e07f10 ffffffff92560c2a
 ffff880462145280 0000000000000001 ffff880468e07f40 ffffffff921376a6
 ffffffff93665ea0 0000cc7c876d28da 0000000000000005 ffffffff9383dd60
Call Trace:
 <IRQ>  [<ffffffff92560c2a>] dump_stack+0x67/0x9d
 [<ffffffff921376a6>] lockdep_rcu_suspicious+0xe6/0x100
 [<ffffffff925ae7a7>] do_trace_write_msr+0x127/0x1a0
 [<ffffffff92061c83>] native_apic_msr_eoi_write+0x23/0x30
 [<ffffffff92054408>] smp_trace_call_function_interrupt+0x38/0x360
 [<ffffffff92d1ca60>] trace_call_function_interrupt+0x90/0xa0
 <EOI>  [<ffffffff92ac5124>] ? cpuidle_enter_state+0x1b4/0x520

Move the entering_irq() call before ack_APIC_irq(), because entering_irq()
tells the RCU susbstems to end the extended quiescent state, so that the
following trace call in ack_APIC_irq() works correctly.
Suggested-by: NAndi Kleen <ak@linux.intel.com>
Fixes: 4787c368 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()"
Signed-off-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org

iopl(3) is supposed to work if iopl is already 3, even if
unprivileged.  This didn't work right on Xen PV.  Fix it.
Reviewewd-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/8ce12013e6e4c0a44a97e316be4a6faff31bd5ea.1458162709.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

On Xen PV, regs->flags doesn't reliably reflect IOPL and the
exit-to-userspace code doesn't change IOPL.  We need to context
switch it manually.

I'm doing this without going through paravirt because this is
specific to Xen PV.  After the dust settles, we can merge this with
the 32-bit code, tidy up the iopl syscall implementation, and remove
the set_iopl pvop entirely.

Fixes XSA-171.
Reviewewd-by: NJan Beulich <JBeulich@suse.com>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This exercises two cases that are known to be buggy on Xen PV right
now.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/61afe904c95c92abb29cd075b51e10e7feb0f774.1458162709.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull in some merge window leftovers.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Returning a 'bool' was very unpopular. Doubly so because the
code was just wrong (returning zero for true, one for false;
great for shell programming, not so good for C).

Change return type to "int". Keep zero as the success indicator
because it matches other similar code and people may be more
comfortable writing:

	if (memcpy_mcsafe(to, from, count)) {
		printk("Sad panda, copy failed\n");
		...
	}

Make the failure return value -EFAULT for now.

Reported by: Mika Penttilä <mika.penttila@nextfour.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mika.penttila@nextfour.com
Fixes: 92b0729c ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Link: http://lkml.kernel.org/r/695f14233fa7a54fcac4406c706d7fec228e3f4c.1457993040.git.tony.luck@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull cpu hotplug updates from Thomas Gleixner:
 "This is the first part of the ongoing cpu hotplug rework:

   - Initial implementation of the state machine

   - Runs all online and prepare down callbacks on the plugged cpu and
     not on some random processor

   - Replaces busy loop waiting with completions

   - Adds tracepoints so the states can be followed"

More detailed commentary on this work from an earlier email:
 "What's wrong with the current cpu hotplug infrastructure?

   - Asymmetry

     The hotplug notifier mechanism is asymmetric versus the bringup and
     teardown.  This is mostly caused by the notifier mechanism.

   - Largely undocumented dependencies

     While some notifiers use explicitely defined notifier priorities,
     we have quite some notifiers which use numerical priorities to
     express dependencies without any documentation why.

   - Control processor driven

     Most of the bringup/teardown of a cpu is driven by a control
     processor.  While it is understandable, that preperatory steps,
     like idle thread creation, memory allocation for and initialization
     of essential facilities needs to be done before a cpu can boot,
     there is no reason why everything else must run on a control
     processor.  Before this patch series, bringup looks like this:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu

       bring the rest up

   - All or nothing approach

     There is no way to do partial bringups.  That's something which is
     really desired because we waste e.g.  at boot substantial amount of
     time just busy waiting that the cpu comes to life.  That's stupid
     as we could very well do preparatory steps and the initial IPI for
     other cpus and then go back and do the necessary low level
     synchronization with the freshly booted cpu.

   - Minimal debuggability

     Due to the notifier based design, it's impossible to switch between
     two stages of the bringup/teardown back and forth in order to test
     the correctness.  So in many hotplug notifiers the cancel
     mechanisms are either not existant or completely untested.

   - Notifier [un]registering is tedious

     To [un]register notifiers we need to protect against hotplug at
     every callsite.  There is no mechanism that bringup/teardown
     callbacks are issued on the online cpus, so every caller needs to
     do it itself.  That also includes error rollback.

  What's the new design?

     The base of the new design is a symmetric state machine, where both
     the control processor and the booting/dying cpu execute a well
     defined set of states.  Each state is symmetric in the end, except
     for some well defined exceptions, and the bringup/teardown can be
     stopped and reversed at almost all states.

     So the bringup of a cpu will look like this in the future:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu

                                       bring itself up

     The synchronization step does not require the control cpu to wait.
     That mechanism can be done asynchronously via a worker or some
     other mechanism.

     The teardown can be made very similar, so that the dying cpu cleans
     up and brings itself down.  Cleanups which need to be done after
     the cpu is gone, can be scheduled asynchronously as well.

  There is a long way to this, as we need to refactor the notion when a
  cpu is available.  Today we set the cpu online right after it comes
  out of the low level bringup, which is not really correct.

  The proper mechanism is to set it to available, i.e. cpu local
  threads, like softirqd, hotplug thread etc. can be scheduled on that
  cpu, and once it finished all booting steps, it's set to online, so
  general workloads can be scheduled on it.  The reverse happens on
  teardown.  First thing to do is to forbid scheduling of general
  workloads, then teardown all the per cpu resources and finally shut it
  off completely.

  This patch series implements the basic infrastructure for this at the
  core level.  This includes the following:

   - Basic state machine implementation with well defined states, so
     ordering and prioritization can be expressed.

   - Interfaces to [un]register state callbacks

     This invokes the bringup/teardown callback on all online cpus with
     the proper protection in place and [un]installs the callbacks in
     the state machine array.

     For callbacks which have no particular ordering requirement we have
     a dynamic state space, so that drivers don't have to register an
     explicit hotplug state.

     If a callback fails, the code automatically does a rollback to the
     previous state.

   - Sysfs interface to drive the state machine to a particular step.

     This is only partially functional today.  Full functionality and
     therefor testability will be achieved once we converted all
     existing hotplug notifiers over to the new scheme.

   - Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying
     processor:

       Control CPU                     Booting CPU

       do preparatory steps
       kick cpu into life

                                       do low level init

       sync with booting cpu           sync with control cpu
       wait for boot
                                       bring itself up

                                       Signal completion to control cpu

     In a previous step of this work we've done a full tree mechanical
     conversion of all hotplug notifiers to the new scheme.  The balance
     is a net removal of about 4000 lines of code.

     This is not included in this series, as we decided to take a
     different approach.  Instead of mechanically converting everything
     over, we will do a proper overhaul of the usage sites one by one so
     they nicely fit into the symmetric callback scheme.

     I decided to do that after I looked at the ugliness of some of the
     converted sites and figured out that their hotplug mechanism is
     completely buggered anyway.  So there is no point to do a
     mechanical conversion first as we need to go through the usage
     sites one by one again in order to achieve a full symmetric and
     testable behaviour"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  cpu/hotplug: Document states better
  cpu/hotplug: Fix smpboot thread ordering
  cpu/hotplug: Remove redundant state check
  cpu/hotplug: Plug death reporting race
  rcu: Make CPU_DYING_IDLE an explicit call
  cpu/hotplug: Make wait for dead cpu completion based
  cpu/hotplug: Let upcoming cpu bring itself fully up
  arch/hotplug: Call into idle with a proper state
  cpu/hotplug: Move online calls to hotplugged cpu
  cpu/hotplug: Create hotplug threads
  cpu/hotplug: Split out the state walk into functions
  cpu/hotplug: Unpark smpboot threads from the state machine
  cpu/hotplug: Move scheduler cpu_online notifier to hotplug core
  cpu/hotplug: Implement setup/removal interface
  cpu/hotplug: Make target state writeable
  cpu/hotplug: Add sysfs state interface
  cpu/hotplug: Hand in target state to _cpu_up/down
  cpu/hotplug: Convert the hotplugged cpu work to a state machine
  cpu/hotplug: Convert to a state machine for the control processor
  cpu/hotplug: Add tracepoints
  ...

Pull irq updates from Thomas Gleixner:
 "The 4.6 pile of irq updates contains:

   - Support for IPI irqdomains to support proper integration of IPIs to
     and from coprocessors.  The first user of this new facility is
     MIPS.  The relevant MIPS patches come with the core to avoid merge
     ordering issues and have been acked by Ralf.

   - A new command line option to set the default interrupt affinity
     mask at boot time.

   - Support for some more new ARM and MIPS interrupt controllers:
     tango, alpine-msix and bcm6345-l1

   - Two small cleanups for x86/apic which we merged into irq/core to
     avoid yet another branch in x86 with two tiny commits.

   - The usual set of updates, cleanups in drivers/irqchip.  Mostly in
     the area of ARM-GIC, arada-37-xp and atmel chips.  Nothing
     outstanding here"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits)
  irqchip/irq-alpine-msi: Release the correct domain on error
  irqchip/mxs: Fix error check of of_io_request_and_map()
  irqchip/sunxi-nmi: Fix error check of of_io_request_and_map()
  genirq: Export IRQ functions for module use
  irqchip/gic/realview: Support more RealView DCC variants
  Documentation/bindings: Document the Alpine MSIX driver
  irqchip: Add the Alpine MSIX interrupt controller
  irqchip/gic-v3: Always return IRQ_SET_MASK_OK_DONE in gic_set_affinity
  irqchip/gic-v3-its: Mark its_init() and its children as __init
  irqchip/gic-v3: Remove gic_root_node variable from the ITS code
  irqchip/gic-v3: ACPI: Add redistributor support via GICC structures
  irqchip/gic-v3: Add ACPI support for GICv3/4 initialization
  irqchip/gic-v3: Refactor gic_of_init() for GICv3 driver
  x86/apic: Deinline _flat_send_IPI_mask, save ~150 bytes
  x86/apic: Deinline __default_send_IPI_*, save ~200 bytes
  dt-bindings: interrupt-controller: Add SoC-specific compatible string to Marvell ODMI
  irqchip/mips-gic: Add new DT property to reserve IPIs
  MIPS: Delete smp-gic.c
  MIPS: Make smp CMP, CPS and MT use the new generic IPI functions
  MIPS: Add generic SMP IPI support
  ...

Pull timer updates from Thomas Gleixner:
 "The timer department delivers this time:

   - Support for cross clock domain timestamps in the core code plus a
     first user.  That allows more precise timestamping for PTP and
     later for audio and other peripherals.

     The ptp/e1000e patches have been acked by the relevant maintainers
     and are carried in the timer tree to avoid merge ordering issues.

   - Support for unregistering the current clocksource watchdog.  That
     lifts a limitation for switching clocksources which has been there
     from day 1

   - The usual pile of fixes and updates to the core and the drivers.
     Nothing outstanding and exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  time/timekeeping: Work around false positive GCC warning
  e1000e: Adds hardware supported cross timestamp on e1000e nic
  ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping
  x86/tsc: Always Running Timer (ART) correlated clocksource
  hrtimer: Revert CLOCK_MONOTONIC_RAW support
  time: Add history to cross timestamp interface supporting slower devices
  time: Add driver cross timestamp interface for higher precision time synchronization
  time: Remove duplicated code in ktime_get_raw_and_real()
  time: Add timekeeping snapshot code capturing system time and counter
  time: Add cycles to nanoseconds translation
  jiffies: Use CLOCKSOURCE_MASK instead of constant
  clocksource: Introduce clocksource_freq2mult()
  clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped()
  clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()
  clocksource/drivers/arm_global_timer: Register delay timer
  clocksource/drivers/lpc32xx: Support timer-based ARM delay
  clocksource/drivers/lpc32xx: Support periodic mode
  clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockevents
  clocksource/drivers/rockchip: Add err handle for rk_timer_init
  ...

Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Miscellaneous fixes, cleanups, restructuring.

   - RCU torture-test updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Export rcu_gp_is_normal()
  rcu: Remove rcu_user_hooks_switch
  rcu: Catch up rcu_report_qs_rdp() comment with reality
  rcu: Document unique-name limitation for DEFINE_STATIC_SRCU()
  rcu: Make rcu/tiny_plugin.h explicitly non-modular
  irq: Privatize irq_common_data::state_use_accessors
  RCU: Privatize rcu_node::lock
  sparse: Add __private to privatize members of structs
  rcu: Remove useless rcu_data_p when !PREEMPT_RCU
  rcutorture: Correct no-expedite console messages
  rcu: Set rdp->gpwrap when CPU is idle
  rcu: Stop treating in-kernel CPU-bound workloads as errors
  rcu: Update rcu_report_qs_rsp() comment
  rcu: Assign false instead of 0 for ->core_needs_qs
  rcutorture: Check for self-detected stalls
  rcutorture: Don't keep empty console.log.diags files
  rcutorture: Add checks for rcutorture writer starvation

Pull x86 timer update from Ingo Molnar:
 "A single simplification of the x86 TSC code"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Use topology functions

Pull x86 core platform updates from Ingo Molnar:
 "Intel Quark and Geode SoC platform updates"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel/quark: Drop IMR lock bit support
  x86/platform/intel/mid: Remove dead code
  x86/platform: Make platform/geode/net5501.c explicitly non-modular
  x86/platform: Make platform/geode/alix.c explicitly non-modular
  x86/platform: Make platform/geode/geos.c explicitly non-modular
  x86/platform: Make platform/intel-quark/imr_selftest.c explicitly non-modular
  x86/platform: Make platform/intel-quark/imr.c explicitly non-modular

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Enable full ASLR randomization for 32-bit programs (Hector
     Marco-Gisbert)

   - Add initial minimal INVPCI support, to flush global mappings (Andy
     Lutomirski)

   - Add KASAN enhancements (Andrey Ryabinin)

   - Fix mmiotrace for huge pages (Karol Herbst)

   - ... misc cleanups and small enhancements"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/32: Enable full randomization on i386 and X86_32
  x86/mm/kmmio: Fix mmiotrace for hugepages
  x86/mm: Avoid premature success when changing page attributes
  x86/mm/ptdump: Remove paravirt_enabled()
  x86/mm: Fix INVPCID asm constraint
  x86/dmi: Switch dmi_remap() from ioremap() [uncached] to ioremap_cache()
  x86/mm: If INVPCID is available, use it to flush global mappings
  x86/mm: Add a 'noinvpcid' boot option to turn off INVPCID
  x86/mm: Add INVPCID helpers
  x86/kasan: Write protect kasan zero shadow
  x86/kasan: Clear kasan_zero_page after TLB flush
  x86/mm/numa: Check for failures in numa_clear_kernel_node_hotplug()
  x86/mm/numa: Clean up numa_clear_kernel_node_hotplug()
  x86/mm: Make kmap_prot into a #define
  x86/mm/32: Set NX in __supported_pte_mask before enabling paging
  x86/mm: Streamline and restore probe_memory_block_size()