This patch avoids to skip discard commands when user sets gc_urgent mode.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds an mount option, "alloc_mode=%s" having two options, "default"
and "reuse".

In "alloc_mode=reuse" case, f2fs starts to allocate segments from 0'th segment
all the time to reassign segments. It'd be useful for small-sized eMMC parts.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces F2FS_FEATURE_FUNCS to clean up the definitions of
different f2fs_sb_has_xxx functions.
Signed-off-by: NSheng Yong <shengyong1@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Add 'whint_mode=fs-based' mount option. In this mode, F2FS passes
down write hints with its policy.

* whint_mode=fs-based. F2FS passes down hints with its policy.

User                  F2FS                     Block
----                  ----                     -----
                      META                     WRITE_LIFE_MEDIUM;
                      HOT_NODE                 WRITE_LIFE_NOT_SET
                      WARM_NODE                "
                      COLD_NODE                WRITE_LIFE_NONE
ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
extension list        "                        "

-- buffered io
WRITE_LIFE_EXTREME    COLD_DATA                WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT      HOT_DATA                 WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET    WARM_DATA                WRITE_LIFE_LONG
WRITE_LIFE_NONE       "                        "
WRITE_LIFE_MEDIUM     "                        "
WRITE_LIFE_LONG       "                        "

-- direct io
WRITE_LIFE_EXTREME    COLD_DATA                WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT      HOT_DATA                 WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET    WARM_DATA                WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE       "                        WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM     "                        WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG       "                        WRITE_LIFE_LONG

Many thanks to Chao Yu and Jaegeuk Kim for comments to
implement this patch.
Signed-off-by: NHyunchul Lee <cheol.lee@lge.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Add the 'whint_mode' mount option that controls which write
hints are passed down to block layer. There are "off" and
"user-based" mode. The default mode is "off".

1) whint_mode=off. F2FS only passes down WRITE_LIFE_NOT_SET.

2) whint_mode=user-based. F2FS tries to pass down hints given
by users.

User                  F2FS                     Block
----                  ----                     -----
                      META                     WRITE_LIFE_NOT_SET
                      HOT_NODE                 "
                      WARM_NODE                "
                      COLD_NODE                "
ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
extension list        "                        "

-- buffered io
WRITE_LIFE_EXTREME    COLD_DATA                WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT      HOT_DATA                 WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET    WARM_DATA                WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE       "                        "
WRITE_LIFE_MEDIUM     "                        "
WRITE_LIFE_LONG       "                        "

-- direct io
WRITE_LIFE_EXTREME    COLD_DATA                WRITE_LIFE_EXTREME
WRITE_LIFE_SHORT      HOT_DATA                 WRITE_LIFE_SHORT
WRITE_LIFE_NOT_SET    WARM_DATA                WRITE_LIFE_NOT_SET
WRITE_LIFE_NONE       "                        WRITE_LIFE_NONE
WRITE_LIFE_MEDIUM     "                        WRITE_LIFE_MEDIUM
WRITE_LIFE_LONG       "                        WRITE_LIFE_LONG

Many thanks to Chao Yu and Jaegeuk Kim for comments to
implement this patch.
Signed-off-by: NHyunchul Lee <cheol.lee@lge.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid build warning]
[Chao Yu: fix to restore whint_mode in ->remount_fs]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Commit 7a20b8a6 ("f2fs: allocate node
and hot data in the beginning of partition") introduces another mount
option, heap, to reset it back. But it does not do anything for heap
mode, so fix it.

Cc: stable@vger.kernel.org
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch rebuild sit page from sit info in mem instead
of issue a read io.

I test this method and the result is as below:

Pre:
 mmc_perf_test-12061 [001] ...1   976.819992: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [001] ...1   976.856446: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1   998.976946: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1   999.023269: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1022.060772: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1022.111034: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [002] ...1  1070.127643: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1070.187352: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1095.942124: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1095.995975: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1122.535091: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [003] ...1  1122.586521: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [001] ...1  1147.897487: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [001] ...1  1147.959438: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [003] ...1  1177.926951: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [002] ...1  1177.976823: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
 mmc_perf_test-12061 [002] ...1  1204.176087: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
 mmc_perf_test-12061 [002] ...1  1204.239046: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit

Some sit flush consume more than 50ms.

Now:
mmc_perf_test-2187  [007] ...1   196.840684: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [007] ...1   196.841258: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [007] ...1   219.430582: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [007] ...1   219.431144: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [002] ...1   243.638678: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [000] ...1   243.638980: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [002] ...1   265.392180: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [002] ...1   265.392245: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [000] ...1   290.309051: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [000] ...1   290.309116: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [003] ...1   317.144209: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [003] ...1   317.145913: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [005] ...1   343.224954: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [005] ...1   343.225574: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [000] ...1   370.239846: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [000] ...1   370.241138: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [001] ...1   397.029043: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [001] ...1   397.030750: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187  [003] ...1   425.386377: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187  [003] ...1   425.387735: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit

Most sit flush consume no more than 1ms.
Signed-off-by: NYunlei He <heyunlei@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If filesystem is readonly, stop to issue discard in daemon.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Remove duplicated codes of assignment for .max_requests and .io_aware_gran.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Once filesystem shuts down, daemons like gc/discard thread should be
aware of it, and do exit, in addtion, drop all cached pending discard
commands and turn off real-time discard mode.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When committing inmem pages is successful, we revoke already committed
blocks in __revoke_inmem_pages() and finally replace the committed
ones with the old blocks using f2fs_replace_block(). However, if
the committed block was newly created one, the address of the old
block is NEW_ADDR and __f2fs_replace_block() cannot handle NEW_ADDR
as new_blkaddr properly and a kernel panic occurrs.
Signed-off-by: NDaeho Jeong <daeho.jeong@samsung.com>
Tested-by: NShu Tan <shu.tan@samsung.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We take very long time to finish generic/476, this is because we will
check consistence of all discard entries in global rb tree while
traversing all different granularity pending lists, even when the list
is empty, in order to avoid that unneeded overhead, we have to skip
the check when coming up an empty list.

generic/476 time consumption:
					cost
Before patch & w/o consistence check	57s
Before patch & w/ consistence check	1426s
After patch				78s
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Fixes the following sparse warnings:

fs/f2fs/segment.c:887:6: warning:
 symbol '__check_sit_bitmap' was not declared. Should it be static?
fs/f2fs/segment.c:1327:6: warning:
 symbol 'f2fs_wait_discard_bio' was not declared. Should it be static?
fs/f2fs/super.c:1661:5: warning:
 symbol 'f2fs_get_projid' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In some case, the node blocks has wrong blkaddr whose segment type is
NODE, e.g., recover inode has missing xattr flag and the blkaddr is in
the xattr range. Since fsck.f2fs does not check the recovery nodes, this
will cause __f2fs_replace_block change the curseg of node and do the
update_sit_entry(sbi, new_blkaddr, 1) with no next_blkoff refresh, as a
result, when recovery process write checkpoint and sync nodes, the
next_blkoff of curseg is used in the segment bit map, then it will
cause f2fs_bug_on. So let's check segment type in __f2fs_replace_block.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's avoid BUG_ON during fill_super, when on-disk was totall corrupted.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

No need return value in restore summary process
Signed-off-by: NYunlei He <heyunlei@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Use f2fs_k{m,z}alloc as much as possible to increase fault injection
points.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch supports to inject fault into kvmalloc/kvzalloc.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces f2fs_kzalloc based on f2fs_kmalloc in order to
support error injection for kzalloc().
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Write hints helps F2FS to determine which type of segments would be
selected for buffered write.

This patch implements the mapping from write hints to segment types
as shown below.

  hints               segment type
  -----               ------------
  WRITE_LIFE_SHORT    CURSEG_HOT_DATA
  WRITE_LIFE_EXTREME  CURSEG_COLD_DATA
  others              CURSEG_WARM_DATA

the F2FS poliy for hot/cold seperation has precedence over this hints.
And hints are not applied in in-place update.
Signed-off-by: NHyunchul Lee <cheol.lee@lge.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Sometimes, after running generic/270 of fstest, fsck reports summary
info and actual position of block address in direct node becoming
inconsistent.

The root cause is race in between __f2fs_replace_block and change_curseg
as below:

Thread A				Thread B
- __clone_blkaddrs
 - f2fs_replace_block
  - __f2fs_replace_block
   - segnoA = GET_SEGNO(sbi, blkaddrA);
   - type = se->type:=CURSEG_HOT_DATA
   - if (!IS_CURSEG(sbi, segnoA))
         type = CURSEG_WARM_DATA
					- allocate_data_block
					 - allocate_segment
					  - get_ssr_segment
					  - change_curseg(segnoA, CURSEG_HOT_DATA)
   - change_curseg(segnoA, CURSEG_WARM_DATA)
    - reset_curseg
     - __set_sit_entry_type
      - change se->type from CURSEG_HOT_DATA to CURSEG_WARM_DATA

So finally, hot curseg locates in segnoA, but type of segnoA becomes
CURSEG_WARM_DATA.

Then if we invoke __f2fs_replace_block(blkaddrB, blkaddrA, true, false),
as blkaddrA locates in segnoA, so we will move warm type curseg to segnoA,
then change its summary cache and writeback it to summary block.

But segnoA is used by hot type curseg too, once it moves or persist, it
will cover summary block content with inner old summary cache, result in
inconsistent status.

This patch tries to fix this issue by introduce global curseg lock to avoid
race in between __f2fs_replace_block and change_curseg.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

After commit a468f0ef ("f2fs: use crc and cp version to determine
roll-forward recovery"), last caller of update_meta_page passing @src
with NULL is gone, so remove related dead code there.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

There are some cases user didn't update SIT cache under this lock,
so let's use rw_semaphore instead of mutex to enhance concurrently
accessing.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This reverts commit 5e443818

The commit should be reverted because call sequence of below two parts
of code must be kept:
a. update sit information, it needs to be updated before segment
allocation since latter allocation may trigger SSR, and SSR allocation
needs latest valid block information of all segments.
b. update segment status, it needs to be updated after segment allocation
since we can skip updating current opened segment status.

Fixes: 5e443818 ("f2fs: handle dirty segments inside refresh_sit_entry")
Suggested-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: remove refresh_sit_entry function]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch exports min_ssr_segments threshold in sysfs to let user
control triggering SSR allocation flexibly.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We have supported to issue discard in specified range during fstrim,
it needs to return caller with successfully trimmed bytes in that
range instead of bytes of invalid blocks which are scanned in
checkpoint.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds to support bio allocation error injection to simulate
out-of-memory test scenario.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

There are several assignments to variables that are redundant
as the values are never read when the variables are updated later
and so the redundant statements can be safely removed.

Cleans up clang warnings:
fs/f2fs/segment.c:923:19: warning: Value stored to 'p' during its initialization is never read
fs/f2fs/segment.c:2060:2: warning: Value stored to 'hint' is never read
fs/f2fs/segment.c:2353:2: warning: Value stored to 'start_block' is never read
fs/f2fs/segment.c:2354:2: warning: Value stored to 'end_block' is never read
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If some abnormal users try lots of atomic write operations, f2fs is able to
produce pinned pages in the main memory which affects system performance.
This patch limits that as 20% over total memory size, and if f2fs reaches
to the limit, it will drop all the inmemory pages.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In ->umount, once we drop remained discard entries, we should not
set CP_TRIMMED_FLAG with another checkpoint.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds tracepoint to trace f2fs_remove_discard.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

__submit_discard_cmd may lead long latency due to exhaustion of I/O
request resource in block layer, so issuing all discard under cmd_lock
may lead to hangtask, in order to avoid that, let's reduce it's coverage.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

There are many different scenarios such as fstrim, umount, urgent or
background where we will issue discards, actually, they need use
different policy in aspect of io aware, discard granularity, delay
interval and so on. But now they just share one common discard policy,
so there will be race when changing policy in between these scenarios,
the interference of changing discard policy will be very serious.

This patch changes to split discard policy for different scenarios.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch wraps scattered optional parameters into discard policy as
below, later, with it we expect that we can adjust these parameters with
proper strategy in different scenario.

struct discard_policy {
	unsigned int min_interval;	/* used for candidates exist */
	unsigned int max_interval;	/* used for candidates not exist */
	unsigned int max_requests;	/* # of discards issued per round */
	unsigned int io_aware_gran;	/* minimum granularity discard not be aware of I/O */
	bool io_aware;			/* issue discard in idle time */
	bool sync;			/* submit discard with REQ_SYNC flag */
};

This patch doesn't change any logic of codes.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Fstrim intends to trim invalid blocks of filesystem only with specified
range and granularity, but actually, it will issue all previous cached
discard commands which may be out-of-range and be with unmatched
granularity, it's unneeded.

In order to fix above issues, this patch introduces new helps to support
to issue and wait discard in range and adds a new fstrim_list for tracking
in-flight discard from ->fstrim.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If f2fs manages multiple devices, in checkpoint, we need to issue flush
in those devices which contain dirty data/node in their cache before
we write checkpoint region, otherwise, filesystem metadata could be
corrupted if hitting SPO after checkpoint.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When multiple device feature is enabled, during ->fsync we will issue
flush in all devices to make sure node/data of the file being persisted
into storage. But some flushes of device could be unneeded as file's
data may be not writebacked into those devices. So this patch adds and
manage bitmap per inode in global cache to indicate which device is
dirty and it needs to issue flush during ->fsync, hence, we could improve
performance of fsync in scenario of multiple device.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

As Ju Hyung Park reported:

"When 'fstrim' is called for manual trim, a BUG() can be triggered
randomly with this patch.

I'm seeing this issue on both x86 Desktop and arm64 Android phone.

On x86 Desktop, this was caused during Ubuntu boot-up. I have a
cronjob installed which calls 'fstrim -v /' during boot. On arm64
Android, this was caused during GC looping with 1ms gc_min_sleep_time
& gc_max_sleep_time."

Root cause of this issue is that f2fs_wait_discard_bios can only be
used by f2fs_put_super, because during put_super there must be no
other referrers, so it can ignore discard entry's reference count
when removing the entry, otherwise in other caller we will hit bug_on
in __remove_discard_cmd as there may be other issuer added reference
count in discard entry.

Thread A				Thread B
					- issue_discard_thread
- f2fs_ioc_fitrim
 - f2fs_trim_fs
  - f2fs_wait_discard_bios
   - __issue_discard_cmd
    - __submit_discard_cmd
					 - __wait_discard_cmd
					  - dc->ref++
					  - __wait_one_discard_bio
   - __wait_discard_cmd
    - __remove_discard_cmd
     - f2fs_bug_on(sbi, dc->ref)

Fixes: 969d1b18Reported-by: NJu Hyung Park <qkrwngud825@gmail.com>
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Once we encounter I/O interruption during issuing discards, we will delay
long time before next round, but if system status is I/O idle during the
time, it may loses opportunity to issue discards. So this patch changes
to hurry up to issue discard after io interruption.

Besides, this patch also fixes to issue discards accurately with assigned
rate.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch activates SSR in gc_urgent mode.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>